Frigidaire Front-Loading Washer Replace Inner Tub
ฝัง
- เผยแพร่เมื่อ 7 ก.ย. 2024
- This video provides step-by-step repair instructions for replacing the inner tub on a Frigidaire front-loading washing machine. The most common reason for replacing the inner tub is when it is damaged.
Click here to purchase part #131618500:
www.repairclini...
You can find printable step-by-step instructions here: www.repairclin...
Additional washing machine repair, troubleshooting tips, help with finding your model number and part replacement videos can be found on our website:
www.repairclini...
All of the information for this inner tub replacement video is applicable to the following brands:
Frigidaire, Kenmore, Gibson, Crosley, Westinghouse, Electrolux
Tools needed: multi-screwdriver, Phillips head bit, needle-nose pliers, pliers, 5/16 socket, 3/8 socket, 9/16 socket, wire cutters, grease
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!
This exact procedure worked for me! I had to replace the broken spider arms.
One extra thing I did though was remove the pump - I had to open it and take out a big piece of metal that prevented it's operation. Now it works again.
Good work Frank!
This is a really excellent repair walk-through. Thank you for providing it!
Our pleasure!
Ur doing a great service making these detailed videos. Thx!!!
Appreciate your comment thanks!
At 6:52, what type of grease should be applied to the sealing surface of the shaft (the brass ring)?
I agree. This is an excellent video. However my problem seems to be leakage around the outer basin. I can see a little dripping around the bottom 2 screws. I've tried to tighten them but they seem fairly tight already. Any thoughts or suggestions?
Ken Ahroni We recommend using the repair help section of our website - @repair - if you enter your washer's model number there you'll have access to model, part and symptom specific repair help.
***** Thank you for your prompt reply. I am very impressed with your company and online customer service.
Amazing videos... Since yesterday, the inner tub shake front-back on final spin causing hard hit on the door. I call a technician who advise me to buy a new washing machine, because it's the inner tub and cost of labor+part is too high. Having done myself few repair in the past, I feel bit sad to have to buy a new machine.. especially after seeing that newest machine seem harder to access in case need to be repair (e.g. no front panel, which at least give access to the pump on that unit). Any recommandation/advises?
***** FYI: the Frigidaire front-loading washing machine show in the video, is exactly the one I have currently (purchase in 2003).
***** If you do it yourself the repair is much less than if a technician does. Enter your model number into our repair help page to find videos that are similar to your machine. www.repairclinic.com/RepairHelp/Appliance-Repair-Help-Lawn-Mower-Repair-Help-Small-Engine-Repair-Help?TLSID=1773
Speed Queen FR7 or TC5000WN
The outer rear tub and the inner tub are fused together with some sort of brown liquid from the bearing all over the place -- and I cannot seem to get them separated even with banging it with a rubber mallet. This is extremely frustrating -- any suggestions on the best way to go about this?
Alana D When the tub seal and main bearing fail they can fuse the shaft into the tub bearing. Soak the shaft and bearing with a penetrating oil and maybe they will separate.
I tried it and I gave up after a few hours. I did soak it in liquid wrench the entire time... I guess the moral of my story is not to keep using the washer when you know the bearing is bad. If I fixed it right away I may have been able to get it apart. Thanks for the fast response and great videos!
Alana D Thank you for the feedback.