When lifting up the gas tank, do you have to drain the fuel when disconnecting the vent hoses?? Not sure what’s going to happen when I disconnect them since i never have before😂
Good question, on older bikes with different connections you would need to, however, with newer bikes you DO NOT need to, just be aware that there will be some fuel leaking out from what is left in the hose after you disconnect it. I usually leave a rag and let it pour into the rag, or get a container for it.
Nice video bro; i have the same bike with the same quickshifter, but since a time, it doesn´t work, i can´t change the gear with the quick. What do you think about it, do you know why doesn´t works it? If you can help me, i would apreciatte it bro. Regards !!
It just sounds like the QS isn't working what so ever so I wouldn't force the gear shift without using the clutch. The QS is a simple system, if the QS icon is displayed on the cluster but doesn't allow you to shift without the clutch it may just be a defective sensor. Hard to diagnose over text/TH-cam but that's what is sounds like at least. I have seen defective QS before. I would first try and deactivated the QS and then reactivate it to see if that helps first. Nothing much to do after that then to try and get it replaced under warranty. If you have the OEM one from Yamaha, it has a one year warranty on it. Hope this helps 🙏!
Nope, no lines need to be removed, however, when lifting up the tank do it slowly to make sure the wires/lines are going up smooth and easy, there should be enough slack to not have to remove any lines.
Thank you! I honestly love doing these type of tutorials. Glad the comments are popping up on how they are useful and cool! Thanks for the continued support! 🙏 🤙
Does it downshift without holding the clutch?
The quick shifter for the R6 is meant for upshifts only. Downshifting requires the clutch to be pulled in all the time.
@@CHRGITUP ok, thank you🤙🏻
what shifter is it
Really good tutorial and understandable for person who don’t speak english. Thanks a lot 👌🏼
You're welcome! Hope it helped! 🤙🏍
Installed it perfectly I think and it comes up on my dash but I still can’t get it to work any help?
@@robainkang5489 can only be used when you are above 4k rpm and probably best to use it from 2nd gear and up.
Nice video
Finally there’s a r6 build series 💪💪
Glad you found the video and enjoyed it! Was this the first video that you have watched about my R6?
about to install it tonight or tomorrow morning on my 2020 R6 can’t wait to feel the difference
It takes some time to remember... "wait I can upshift with my clutch!!" Hahah works awesome!
When lifting up the gas tank, do you have to drain the fuel when disconnecting the vent hoses?? Not sure what’s going to happen when I disconnect them since i never have before😂
Good question, on older bikes with different connections you would need to, however, with newer bikes you DO NOT need to, just be aware that there will be some fuel leaking out from what is left in the hose after you disconnect it. I usually leave a rag and let it pour into the rag, or get a container for it.
Thanks bro for a good tutorial 👌 🙌
I'll have to do it to mine now 😀
Not hard what so ever... glad it could help for your install in the future! Don't forget to subscribe if you haven't already 😉 😊
Is it possible to get a two way QS for 2018 r6?
Nope, not possible. Only possible on the R1 models from a certain year onwards.
Nice video bro; i have the same bike with the same quickshifter, but since a time, it doesn´t work, i can´t change the gear with the quick. What do you think about it, do you know why doesn´t works it?
If you can help me, i would apreciatte it bro.
Regards !!
Hey there, what's actually happening when you try to upshift? Is the QS icon displayed on your cluster?
@@CHRGITUP Yes the icon is there, but the gear can´t pass, it feel very hard, like if would have a tope.
It just sounds like the QS isn't working what so ever so I wouldn't force the gear shift without using the clutch. The QS is a simple system, if the QS icon is displayed on the cluster but doesn't allow you to shift without the clutch it may just be a defective sensor. Hard to diagnose over text/TH-cam but that's what is sounds like at least. I have seen defective QS before.
I would first try and deactivated the QS and then reactivate it to see if that helps first. Nothing much to do after that then to try and get it replaced under warranty. If you have the OEM one from Yamaha, it has a one year warranty on it.
Hope this helps 🙏!
when lifting the gas tank did u have to remove any fuel lines ?
Nope, no lines need to be removed, however, when lifting up the tank do it slowly to make sure the wires/lines are going up smooth and easy, there should be enough slack to not have to remove any lines.
Where did you purchase the QS? I can't find one currently.
This quick shifter is available from Yamaha. Part # BN6-E81A0-V0-00. Hope this helps!
yes , mine gets installed on monday
Noooiiiiice!!! You'll see the difference immediately! Ride safe!
Friend where can I buy it?
This OEM Quick Shifter Assy is sold by Yamaha, you should be able to find it on their website or at your local dealers.
Very cool has usual !
Thank you! I honestly love doing these type of tutorials. Glad the comments are popping up on how they are useful and cool! Thanks for the continued support! 🙏 🤙