Concise, I love your videos man. Always on point. To me, the BaByliss and Wahl guards are the best. Everything that BaByliss does is top notch, and as far as guards go, this is where Wahl shines. Great video and thank you!
Having both the wahl premium and the babyliss premium if i need to take a lot of with the .5 I use the wahl and I need just a little of I use the babyliss they compliment each other perfectly
Good video and input. I have used all the guards in your video and I pick and choose guards depending on my clients hair. I need to get a feel for the hair in order to choose. Thanks for the info 👊🏾💯
I’ve never used any type of Andis clippers so don’t have any experience with the purple guards. I’ve been rocking with the wahl premium guards the most of time I’ve been cutting and love them. I had some of the old babyliss guards and they were good but I’m definitely looking forward to getting the new babyliss premium guards
Just enjoyed your description and comparison of the guards, excellent, your opinion really helped me. I have seen andis double magnet guards have more than 7 teeth, am I right. What advantage does having more teeth on the guard have over less teeth.
I never knew there as a difference in guard I guess I never paid attention all though I did notice the teeth on the wahl are smaller and thinner which I love I’m currently using the jrl there not bad there just tight you have to press hard and press both ends or they will start rattling
I like thinner gaurds. Wahl used to make a thinner 1/8 gaurd that opened to a 1 1\2 but got a little bit tighter when closed. They stoppped making it. I ordered both gamma dubs and babyloss premium but im starting to think im gonna be dissapointed with them
I just got the new Babyliss guards a couple of weeks ago. I have to say, I’m very disappointed with them. They are just way too thick for me. They just don’t feel natural up against the clients heads. And it seems like hair get stuck in between the clipper teeth and the blades when I use them. Just can’t get down with them. I just don’t understand why all of these companies don’t make a zero guard like wahl. I think it’s the only zero guard, that really cuts good, and feeds the hair good. All of the other zeros, really don’t do anything🤷♂️🤷♂️
Try the jrl .5 guard. Also the andis 0 and gamma 0 are very identical the way they cut. They cut a little longer than a wahl .5 but if you know how to use them it actually speeds up the transition to the 1 guard.
@@Utubedeletescomments that’s unfortunate, but I havnt heard that testimony with any frequency.. usually I ONLY hear great love for the double mags.. 🤷🏽♂️ try again?
I have the andis single magnetig guards with andis uspro li clipper(taper) and I am not satisfied with the result in fades in comparison with wahl guards . The andis guards leaving some lines in your fade.
@@ConcisetheBarber thnx for the response one last question do you recomemd the andis premium guards for my andis clipper ?because I can't use the double magnetig guards
Anyone else have issue with babyliss guards hitting the fx clipper when zero gapped and lever all the way closed ? That’s the only thing for me they are not too zero gap friendly lol
I know the fx clipper to have some room to push down with your cutting someone .. maybe that could be it.. me personally I wouldn’t completely zero gap them
@@ConcisetheBarber yeah your right every since I put them back almost to factory but just a couple hairs more gapped and they are perfect, haha your right especially since a lot of guys trying to turn all off there clippers into trimmers 😆 thanks brotha one love ✊🏽
I had this problem with classic Babyliss 0,5 guard but it disapeared after i bought the premium 0,5. Build quality od great on them but i would prefer bigger gaps between teeths on these Babyliss premium guards
I use Oster Clippers and like the Oster Universal clipper guards. They attach to pretty much any of the Oster clippers.With spring loaded clips they definitely stay in place and by all accounts should fit on the new cordless Fast Feeds and Classic 76’s. I find Oster guards stiff. I think the Whal professional clipper guards to be pretty good too except I don’t use Whal adjustable clippers like the Seniors. The Whal guards are well build and more supple, read comfortable for the customer. The guards for the Beretto line seems to be made of the same material as the Whal Universal guards but of course only fit the Whal German made blades. I find the Purple Andis guards, while supple and flexible, are slightly bigger and therefore dont fit tightly on the Oster clipper blades. Thank you for the Review.
Concise, I love your videos man. Always on point.
To me, the BaByliss and Wahl guards are the best. Everything that BaByliss does is top notch, and as far as guards go, this is where Wahl shines.
Great video and thank you!
To answer your question. I have used Andis and Wahl and JRL. My favourite is Wahl premium.
Yea can’t go wrong with them at all
Babyliss knocked it out of the park with this guards. I use them with my JRLs and oh boy, it’s a game changer. 💯
Yea I do like them don’t have a problem with them at all
Having both the wahl premium and the babyliss premium if i need to take a lot of with the .5 I use the wahl and I need just a little of I use the babyliss they compliment each other perfectly
Yea I can agree with that
Good video and input. I have used all the guards in your video and I pick and choose guards depending on my clients hair. I need to get a feel for the hair in order to choose. Thanks for the info 👊🏾💯
Yea I completely understand that .. right now i test them all to see which one works better with which texture
I’ve never used any type of Andis clippers so don’t have any experience with the purple guards. I’ve been rocking with the wahl premium guards the most of time I’ve been cutting and love them. I had some of the old babyliss guards and they were good but I’m definitely looking forward to getting the new babyliss premium guards
Thanks for your feedback soldier barber life
Andis is garbage.
.5 --1.5 wahl guards are nice but it's downhill from there. Andis guards are the best in my opinion
Yea I like Andis guards too
Production is on point brother. Video quality crazy!. Can you turn the music down just a little though?
Thanks dominc for the feedback
Agreed, take the music down a little bit just to make it background music so what you’re saying is more prominent
thanks for the video. good information..😊
Glad it was helpful!
Tried them all but naturally keep gravitating towards the Wahl premiums
I understand
Just enjoyed your description and comparison of the guards, excellent, your opinion really helped me. I have seen andis double magnet guards have more than 7 teeth, am I right. What advantage does having more teeth on the guard have over less teeth.
just think of a comb.. wider teeth is more hair coming through..but no tension.. more teeth is more detailing work
I never knew there as a difference in guard I guess I never paid attention all though I did notice the teeth on the wahl are smaller and thinner which I love I’m currently using the jrl there not bad there just tight you have to press hard and press both ends or they will start rattling
Yea with the babyliss ones and SC guards the rattling isn’t there
My guy dope vid! Do a follow up with the Andis Premium guards and the Speed O guards (they are Red)
just got eh speed 0 guards.. so video should be coming soon
You was reading my mind thank you
No problem Desmond .. thanks for the support
I like thinner gaurds. Wahl used to make a thinner 1/8 gaurd that opened to a 1 1\2 but got a little bit tighter when closed. They stoppped making it. I ordered both gamma dubs and babyloss premium but im starting to think im gonna be dissapointed with them
Let me know what you think of them when you use them
@@ConcisetheBarber i dont like the babyliss gaurds
Will the wahl premium guards fit the jrl clippers?
Yes
Can these clipper guards be attached with wahl detailer li (cordless) ?
These guards only fit the clippers and not the trimmers.. sometimes the trimmers come will small guards for it
Nice detailed review. If you revise the video go into the differences between single mag vs double mag which one goes better on which blades
Gotcha I will do that thanks 🙏🏾
the single mag would be better for blades that come with flat screws.
Can i use babyliss or whal guards on gamma+ clippers?
Yes you can .. only clippers that don’t take wahl guards is andis and oster
@@ConcisetheBarber Ok thanks!!!
I just got the new Babyliss guards a couple of weeks ago. I have to say, I’m very disappointed with them. They are just way too thick for me. They just don’t feel natural up against the clients heads. And it seems like hair get stuck in between the clipper teeth and the blades when I use them. Just can’t get down with them. I just don’t understand why all of these companies don’t make a zero guard like wahl. I think it’s the only zero guard, that really cuts good, and feeds the hair good. All of the other zeros, really don’t do anything🤷♂️🤷♂️
I honestly like the babyliss 0 guard… that and the 1 guard
Try the jrl .5 guard. Also the andis 0 and gamma 0 are very identical the way they cut. They cut a little longer than a wahl .5 but if you know how to use them it actually speeds up the transition to the 1 guard.
Do the Wahl premium Guard fit on the Babyliss FX870 Clipper? Or should I get the Babyliss premium guards instead?
Wahl fits on all Babyliss clippers
Double purples hands down, but the Whals are close behind.. just learning about the baybliss and Style Crafts so I need to check them out
Yea man they aren’t that bad at all
Magnets fell off my purple guards. Garbage
@@Utubedeletescomments that’s unfortunate, but I havnt heard that testimony with any frequency.. usually I ONLY hear great love for the double mags.. 🤷🏽♂️ try again?
How can I get the Andis double magnetic ones to fit on a Babyliss pro clipper?
same way as this video
@@ConcisetheBarberWhat do you mean? I didn’t see anything about how to make them fit on a Babyliss clipper
I’m sorry I thought this was a different video here is the link right here th-cam.com/video/8QUa5eV-nvQ/w-d-xo.html
Which one of these guards are compatible with SC Instinct X Clippers?
all of them except the purple ones
@@ConcisetheBarber even the andis double magnetic ones? 🙏🏾🙏🏾
@@dinof8039 I edited my comment
I have the andis single magnetig guards with andis uspro li clipper(taper) and I am not satisfied with the result in fades in comparison with wahl guards . The andis guards leaving some lines in your fade.
Yea I can’t use the single guards
@@ConcisetheBarber so the double guards with the masters are better ?
@@dimitriskarolidis3339 yes
@@ConcisetheBarber thnx for the response one last question do you recomemd the andis premium guards for my andis clipper ?because I can't use the double magnetig guards
hey, will Wahl premium fit the Babyliss Fx Pro 8700 without any problems?
Yes that should fit fine
Was your babyliss guards (0.5-1.5) fit really snug with the wahl clippers or jrl. Like they fit but it’s very snug
Umm at first I felt it was very snug but it seems to adjust to them better now
Can babyliss guard fit the oster fast feeds(just seen u answer this in another comment) so what guards can I get for oster fast feeds?
You can get andis guards
Does Wahl premium guards fit babyliss pro clippers?
Yes
Will those babyliss pro fit the fast feeds?
They do not fit Andis or fast feed blades
Kinda late but do wahl guards fit on babylissprofx clippers. If not what type of guards fit on them?
Besides the premium ones
yes they all fit babyliss...only guard that dont fit are andis ones
@@ConcisetheBarber ok thx so much🫶
What about the andis premium guards?
They are good but most likely would place them behind the purple double magnetic guards
Anyone else have issue with babyliss guards hitting the fx clipper when zero gapped and lever all the way closed ? That’s the only thing for me they are not too zero gap friendly lol
I know the fx clipper to have some room to push down with your cutting someone .. maybe that could be it.. me personally I wouldn’t completely zero gap them
@@ConcisetheBarber yeah your right every since I put them back almost to factory but just a couple hairs more gapped and they are perfect, haha your right especially since a lot of guys trying to turn all off there clippers into trimmers 😆 thanks brotha one love ✊🏽
I had this problem with classic Babyliss 0,5 guard but it disapeared after i bought the premium 0,5. Build quality od great on them but i would prefer bigger gaps between teeths on these Babyliss premium guards
What's better, the pointed ends or rounded ends?
i actually like mines to have a little pointed to it
Does anyone know where I can get the original andis 0 double mag guard?
Not I.. I would love to grab another
Hey do those pro premium babyliss guards fit on the wahl senior???
I haven’t used my seniors in a while but I can’t see why they wouldn’t fit
I use Oster Clippers and like the Oster Universal clipper guards. They attach to pretty much any of the Oster clippers.With spring loaded clips they definitely stay in place and by all accounts should fit on the new cordless Fast Feeds and Classic 76’s. I find Oster guards stiff. I think the Whal professional clipper guards to be pretty good too except I don’t use Whal adjustable clippers like the Seniors. The Whal guards are well build and more supple, read comfortable for the customer. The guards for the Beretto line seems to be made of the same material as the Whal Universal guards but of course only fit the Whal German made blades. I find the Purple Andis guards, while supple and flexible, are slightly bigger and therefore dont fit tightly on the Oster clipper blades. Thank you for the Review.
Thank you Rick for watching
Can you use the Andis purple guards on a babyliss Pro Fx boosted+ and StyleCraft Ergo
only if you modify them
How can we get them
Which guards?
Why Andis doesn’t want to give us the OG guards?
i think its a safety issue but i think someone is coming out with something like it soon
They should make full metal guards
Idk about that
So definitely babyliss .5 is best in your opinion?
Yes
I’m gonna have to fux wit it for awhile. Hanging up the wahl .5 for a bit
Which other brands of clippers are the Andis purple guards compatible without modification?
Oster