Love it but what did you use to make the vinyl stick to the mat before cutting you used the scraper to secure it to the mat to keep it from moving but did you have to pull the backing off the vinyl first (something we wouldn't usually do) need to know this step any help would be greatly appreciated. Thank you.
We ordered the names from a shop on ETSY. It should not be hard to DIY if you have a Circuit. You would just have to make sure to get a blade that can cut acrylic. I will try making a video soon that will show how you can DIY them.
No we didn't but we will be making one this month. We did use a custom font for this project but in the upcomimg video we will talk about how to choose your font.
We plan to make another video to show how to design in circuit space really soon. Tips: use a bigger font. Try to make sure the letters in the font have a little space between them. Also, use a new blade. We hope these tips help.
Try using a bigger font and a new blade. Also, do not skip the step at 3:54. That step is really important when making sure the words don't come up. Be sure to go slow when you peel the vinyl. If you see any letters coming up lay the vinyl back down and repeat 3:54 on the word/letters coming up. We hope this helps.
I put the blade cut on less & it still cut too much. Even tho I peeled words b4 but w/this project.. All My words didn't peel right so I gave up for the moment
@@keyawright6736 be sure to use a fresh blade. We had that problem but it was better with a new blade. Also use your picker tool for stubborn letters and pull the extra vinyl off slowly.
The menus turned out beautifully! Well done!
We will be making these for my daughter"s wedding. Your instructions are simple and diy friendly. Thank you for sharing.
No Problem. I'm sure it will turn out great.
Absolutely beautiful! I love how you used different painting styles on the back to add interest. Great job!
Love it but what did you use to make the vinyl stick to the mat before cutting you used the scraper to secure it to the mat to keep it from moving but did you have to pull the backing off the vinyl first (something we wouldn't usually do) need to know this step any help would be greatly appreciated. Thank you.
You don't pull off the backing. The Mats for the circuit is tacky so it will hold the Vinyl on it. The mat is like big Sticker almost.
Looks very easy. Thank you for sharing.
I gotta say this is so much easier than card stock…. Thank you so much for sharing… #new subscriber
Detailed video on the fonts & sizes of this & also, did you have to 'mirror' the font before printing these using Cricut on the foil vinyl?
We will do a detailed video on fonts and sizes very soon and no we did not mirror the font.
What pressure did you use for the blade cutting on the cricuit design?
@@keyawright6736 we cut it on the vinyl setting.
Thanks for sharing. How did you do the names?
Hey Nicole we actually ordered the names on Etsy. But we will do a video soon on how to DIY them.
Hello, Do you have a tutorial on how to make the names at the top of your menu?
Hey Mz Kia, we actually purchased the name plates from Etsy. However, we plan to post a video on how to DIY it soon.
Did you use foil or vynil? Also uou said cut it, does thst mean cut the foil?
We used vinyl. What part are you referring to when you asked about us saying cut it?
Do you have to use a certain pen to cut the foil for the cricut?
No we just used a new blade.
I loved this it turned out amazing 🤗
This was a great tutorial, thank you!!
Do you have a video on how to make those acrylic name
Plates?
We ordered the names from a shop on ETSY. It should not be hard to DIY if you have a Circuit. You would just have to make sure to get a blade that can cut acrylic. I will try making a video soon that will show how you can DIY them.
Nice job !! Would love to see the design process
Hi. What setting do you cut on to make sure your vinyl doesn’t come off the board?
We had the setting on vinyl. Be sure to use a new blade.
Did you ever get to making a video of how you made the lettering with cricut?
No we didn't but we will be making one this month. We did use a custom font for this project but in the upcomimg video we will talk about how to choose your font.
Hello! Did you use the acrylic for the names on top of the menu
We ordered those off of Etsy. However, we will be making a video on how to DIY those soon.
Can you share what is the tiny font? Thank you! Beautiful design
Hey Judith, the small word font was arial rounded mt bold (11pt).
Is there a video on how you did the menu In design space?
No but we plan to make one.
You didddddd tht !!!! Omg thank you
This is awesome ❤️
What font did you use? I would like a more detailed video. Thank you,
Nice job ladles
I'm using Premium Vinyl & fine cut w/a new blade. It's cutting too hard. What am I doing wrong? How can I fix?
Try going down to the lowest setting which is paper and see if that helps.
I will retry again 😊😁
Love it!
Can u tell me wts the measurements u put the computer on
I tried this but all my wording came off 😩 can you make a tutorial on how you designed this in the circuit design space?
We plan to make another video to show how to design in circuit space really soon. Tips: use a bigger font. Try to make sure the letters in the font have a little space between them. Also, use a new blade. We hope these tips help.
So I am so stuck my words don't stay once it cuts and I try to peel the vinyl everything comes up. What am I doing wrong
Try using a bigger font and a new blade. Also, do not skip the step at 3:54. That step is really important when making sure the words don't come up. Be sure to go slow when you peel the vinyl. If you see any letters coming up lay the vinyl back down and repeat 3:54 on the word/letters coming up. We hope this helps.
Hey can you do a video on how to do the personalised names that is above the menu please
We actually purchased the name plates from Etsy. However, we plan to post a video on how to DIY it soon.
I’m trying to print a little bit bigger letters than this and the letter keeps coming off while cutting can you help
Try changing to a fresh blade and see if that helps.
Thx for sharing
What size acrylic sheet did you use?
They were 4x6. There is a link in the description box if you want to purchase the same ones.
Please go more into detail about how to put your wording and design space I am struggling
We will be making something similar soon and we will go into more details.
Hey I did a remake of your angel wing arrangement I was trying to email you the pics but it says something’s wrong with that email
Hey Asia, we would love to see it. The email is kaylaxshonie@gmail.com. Is that the one you tried?
Do you remember what font you used?
Hey Rickeyada, the small word font was arial rounded mt bold (11pt). The fonts for 'Menu' and the subtitles were custom fonts that we downloaded.
How long did this take?
It took a few hours because we had to let the paint dry and the Cricut had to cut each one. It goes faster when you cut two at a time.
It is beautiful but omg it takes so much work. I am not gonna be able to make 50
What size Font ?
I put the blade cut on less & it still cut too much. Even tho I peeled words b4 but w/this project.. All My words didn't peel right so I gave up for the moment
I got the perfect font too just playing around w/it but the letters didn't pull off right🥹
@@keyawright6736 be sure to use a fresh blade. We had that problem but it was better with a new blade. Also use your picker tool for stubborn letters and pull the extra vinyl off slowly.
Thank You!
Help can you make video from start to finish please
I would like to get the video plz and ty
What fonts did you use?
The small words font was arial rounded mt bold (11pt). The fonts for 'Menu' and the subtitles were custom fonts that we downloaded.
@@kaylaxshonie Thank you so much ❤️❤️❤️
Knife and spoon go on the right and the knife blade needs to face the plate. Just some advice from a professional event planner