When i started the repair business, we offered both electronics repair and web development services. We got so busy with repairs, I gave less attention to web development and just stopped at one point to focus on growing the repair business. I was working on a unique website builder called pageox.com. I worked on it for 2 years but never got to 100% finish it after the repair business took off. Maybe one day i will.
I have the exact same problem as you on iphone 8 plus but mosfet is not missing and also pad under this mosfet is not missing (i've tried to remove this mosfet and check pad and put back) issue remains. Battery shows service and phone is not charging but port is ok and battery also. Do you have any idea ?
Glue was accidentally spelt on my iphone 8plus motherboard by an amateur technician which let to overheating and frequent rebooting and eventually the red screen. Should i just replace my logic board or what????
:) I didnt expect that you are an ex web dev... I am currently a web dev from more than 12 years and I am a bit boored. I really want to become you (as knowedge in electronics), but I don't know from where to start. Can you share - how you started/learned electornics to become so good ?
@nortridgerfix Hi I have xs when I plug my charger it's does not showing the charging simbol when it's shit down I plug charger it's showing charging animation but not charging.some time it's charge and heating lagging please help me
i just replaced the battery of my Iphone 8plus and the lightning port however while it turns on my phone isnt able to read the new battery. Further more it isnt able to wireless charge either. im not sure what to, I dont have the money to buy a new phone or to get it serviced. how can i fix it?
Your skills are so excellent even i also fix mobile phones and i am so amazed to see how u put the ic on ur own made track with the help of jumper wire and pasted with smd gun..you know we just put tape on the wire to hold it on one place but saw this uv mask method for the very first time..will try this for sure
My iPhone 8's PD fast charging capability is no longer functioning. Currently, I am only able to charge it with 970mA at 5W, and I am experiencing some issues. Sometimes it doesn't charge, but when I replug the charger, it starts charging again.
Great Video Sir..! New Subs here. I have an iPhone 8 with same Issue, where can I connect the jumper from the Battery terminal., thanks a Lot and God Bless..!
I got bit similar problem but also micraphone is not Working When I switch off the phone Plug in Its comes up but not showing as it's charging and micraphone and loud speakers is not Working
I don't know if you might ever see this comment but i hope so. I have an iphone 8p and it's not charging just as yours, and the mosfet is in place, how can you assist me to work on it please
I have an iPhone 8 plus, which behaved perfectly with the old battery except the Battery Health was 81%. I have replaced the battery with 3 different new ones of completely different makes (one is absolutely IDENTICALLY Apple-branded as the old one, the other two are clones) and they all show 0% charge but last for 4 days or more if the phone is left idle. But if I put the old battery back, it goes back to working perfectly (except for the 81% BH). So maybe there is a problem with the connector on the new batteries? Or a software or firmware issue and not the main phone hardware? EDIT: I opened up the phone again and looked at it with a 100x microscope (which was too much magnification, hard to tell where you are on the board!) and it was a bit different to your video where your two MOSFETs are, mine just has two bright silver stripes and a few resistors. But it all looked intact so I gave it a blast with an air-jet and put it together with the newest Apple-branded battery, and now it works!
At 3:46 we're going to use "animaled" wire. :D (yes of course it enameled wire). Newer versions of the iPhone 8 like the SE2 and SE3 have an epoxy coating on most components around the connectors, less chance of knocking them off but also makes it more difficult to repair. :(
Hi please help, after removing the mosfet ic i checked the line ( from the battery clip to the ic ) *it was Ok. I put it in back ( the ic) .. the phone did not come up ( phone not powering up) What can i do?
Hello, need a reply asap. This happened to my iPhone X after getting my screen replaced, now the place I got it replaced is wanting to charge me to put it right. Is this the fault of theirs for repairing it incorrectly?
sir i have similar isssue on my oppo f9 . everytime i connect the charging cable on the charging pin and try to charge my oppo f9 , the pinked/reddish thunder shape charging logo appears on the screen and my battery stays only on 50% wont adding up neither decreasing. i hope you can help me and teach me the solution i need to do . i already change nee battery and charging flex cable but its still same problem . godbless and more power to your channel. im from manila philippines learning and practicing myself to be a good mobile tech someday
One question: If no back-up has been done (impossible) for days, will the data be stored after this procedure or will the pictures and videos be deleted when started again? Thank you very much for letting me know.
hey man I have an Iphone 8 no physical damage looks perfect battery saying 0%, charge not taking any charge does detect the charger being pluged in. Is this another tristar failure ?
I like watching the repairs but every time you hold up the amp meter you can not see anything just the backlight. Maybe have a second cam and do picture in picture for certain bits? Keep up the good work
well damn good video, very informative, just wanted to ask you which microscope and camera are you using, like how many MP camera is that coz clarity is really good, please do share, tks
what are the technical terms for the paste that used to do the soldering process also what was the intensity of your heat gun when you did the part replacement? please advise sending love all the way from jamaica
Would u explain why did u quit web development?
When i started the repair business, we offered both electronics repair and web development services. We got so busy with repairs, I gave less attention to web development and just stopped at one point to focus on growing the repair business. I was working on a unique website builder called pageox.com. I worked on it for 2 years but never got to 100% finish it after the repair business took off. Maybe one day i will.
Where to get every phone model board diagrams?
@@k4sif justo google it
@@NorthridgeFix send me u whatsapp number
@@k4sif zxw
Thanks for fixing my iPhone! I really appreciate it!!! Looking forward to getting it back in a few days. You’ve got a customer for life.
You're welcome Paul. Glad it worked out.
You not only managed to spot a missing component with it's missing path but you soldered it in a crowded position! Hats off to you, Im subscribed
you motivated me, i work as Graphic designer for 6 years while studying and repairing pc, laps etc. i always get blamed from parent doing both
So jumper this cirquit for fix that, big thanks brother
My iPhone 8 plus has the exact issue. What does it cost to repair something like this? Approximately.
I have the exact same problem as you on iphone 8 plus but mosfet is not missing and also pad under this mosfet is not missing (i've tried to remove this mosfet and check pad and put back) issue remains. Battery shows service and phone is not charging but port is ok and battery also. Do you have any idea ?
Love you work brother! I'm learning so much from your videos.. 💯✊👌🙏
where I will learn the basics if I want to start repair phones ? thanks
Glue was accidentally spelt on my iphone 8plus motherboard by an amateur technician which let to overheating and frequent rebooting and eventually the red screen. Should i just replace my logic board or what????
:) I didnt expect that you are an ex web dev... I am currently a web dev from more than 12 years and I am a bit boored. I really want to become you (as knowedge in electronics), but I don't know from where to start.
Can you share - how you started/learned electornics to become so good ?
Hello sir... I wanted to learn Iphones hardware software from your lab .. can you teach me sir please
Does it matter that the UV mask covered some flux?
No problem
My iPhone 8 has the same problem. Will wireless charger solve the problem or have to undergo this repair?
Why was MOSFET missing ? Apple quality ?
I love yu sir... Yu r inspiration for me... Love from India.... Love yu lots... ❤️❤️🇮🇳🇮🇳
Thanks brother. I appreciate it.
@nortridgerfix
Hi I have xs when I plug my charger it's does not showing the charging simbol when it's shit down I plug charger it's showing charging animation but not charging.some time it's charge and heating lagging please help me
maşaallah nice video thenkyou....!
How can make my soldering tred hold strong
This guy is a beast. Much respect for your experience
i just replaced the battery of my Iphone 8plus and the lightning port however while it turns on my phone isnt able to read the new battery. Further more it isnt able to wireless charge either. im not sure what to, I dont have the money to buy a new phone or to get it serviced. how can i fix it?
Your skills are so excellent even i also fix mobile phones and i am so amazed to see how u put the ic on ur own made track with the help of jumper wire and pasted with smd gun..you know we just put tape on the wire to hold it on one place but saw this uv mask method for the very first time..will try this for sure
My iPhone 8's PD fast charging capability is no longer functioning. Currently, I am only able to charge it with 970mA at 5W, and I am experiencing some issues. Sometimes it doesn't charge, but when I replug the charger, it starts charging again.
Incredable work
What is the device called to test the charge port ? Do you have any link to buy that what brand do you use please advise
Which said pass
Great Video Sir..! New Subs here. I have an iPhone 8 with same Issue, where can I connect the jumper from the Battery terminal., thanks a Lot and God Bless..!
Really nice work.
with tristar tester can also check iphone 8, 8+ ? because from iphone 8 till newest iphone have hydra
If i will fix my phone with the same issue like this will it delete all my photos in gallery?
Ok, same problem, but why the jumper cable? Since there is continuity at least in my case.
Should i jump wire or direct solder the mosfet?
I got bit similar problem but also micraphone is not
Working
When I switch off the phone
Plug in
Its comes up but not showing as it's charging and micraphone and loud speakers is not Working
I have the same problem with the shame that i have been in the solution, please help
I don't know if you might ever see this comment but i hope so.
I have an iphone 8p and it's not charging just as yours, and the mosfet is in place, how can you assist me to work on it please
If iphone 8 plus suddenly shutdown and can't be turn on bcause of battery health to low, what will be effect on that iphone?)
Such a tight fix,
And how is possible if somt charge why is still alive???
Good job
Have you ordered them books of fuses,resistors,diodes etc
Them as in those ?
If I were to mail it in to you, how much would the repair cost me?
An amazing job 👍🏻
I have an iPhone 8 plus, which behaved perfectly with the old battery except the Battery Health was 81%.
I have replaced the battery with 3 different new ones of completely different makes (one is absolutely IDENTICALLY Apple-branded as the old one, the other two are clones) and they all show 0% charge but last for 4 days or more if the phone is left idle.
But if I put the old battery back, it goes back to working perfectly (except for the 81% BH).
So maybe there is a problem with the connector on the new batteries? Or a software or firmware issue and not the main phone hardware?
EDIT: I opened up the phone again and looked at it with a 100x microscope (which was too much magnification, hard to tell where you are on the board!) and it was a bit different to your video where your two MOSFETs are, mine just has two bright silver stripes and a few resistors. But it all looked intact so I gave it a blast with an air-jet and put it together with the newest Apple-branded battery, and now it works!
I had this issue and turned out to be wireless charging pad that came with a replacement rear housing..
How do I ship my phone with the Same problem to you for it to get fixed
Good morning, having this same issue... are you still functional, where are you located, how can I get my phone to you?
At 3:46 we're going to use "animaled" wire. :D (yes of course it enameled wire).
Newer versions of the iPhone 8 like the SE2 and SE3 have an epoxy coating on most components around the connectors, less chance of knocking them off but also makes it more difficult to repair. :(
Hi please help, after removing the mosfet ic i checked the line ( from the battery clip to the ic ) *it was Ok. I put it in back ( the ic) .. the phone did not come up ( phone not powering up)
What can i do?
That's like watching surgery. My 2011 iMac has suddenly gone into a bootloop and my 2 Apple keyboards won't work. It's totally bizarre.
Can please help me? My iphone 6plus is broken,, im from philipines,, i want to send to you my iphone for fixing,, i hope you will help me, thank you
Hello, need a reply asap.
This happened to my iPhone X after getting my screen replaced, now the place I got it replaced is wanting to charge me to put it right. Is this the fault of theirs for repairing it incorrectly?
no its not their fault
hello, anyone interested on some parts for the iPhone 11 Pro Max ? I have screen, taptic engine, housing, all screws except 2 and all shields
So i habe the same problem. Only that the Component next to the mosfet is loose.
I love your videos, it motivates me so much that it perfects me in micro-welding. Thank you for this permanent sharing.
sir i have similar isssue on my oppo f9 . everytime i connect the charging cable on the charging pin and try to charge my oppo f9 , the pinked/reddish thunder shape charging logo appears on the screen and my battery stays only on 50% wont adding up neither decreasing. i hope you can help me and teach me the solution i need to do . i already change nee battery and charging flex cable but its still same problem . godbless and more power to your channel. im from manila philippines learning and practicing myself to be a good mobile tech someday
How can you repair that for me please
Will a wireless charger be. Good work around
it's interesting that your a web dev. I was guessing you were an elecrical engineer. you're vwry talented.
One question: If no back-up has been done (impossible) for days, will the data be stored after this procedure or will the pictures and videos be deleted when started again? Thank you very much for letting me know.
Haha, that phone is like a house where the lights are on but nobody is home lol..
I have the same problem with my xr, what do I do and can I do fix it at hand me?
How much money should To this work?
Hi where are you from I want to learn from you please guide thanks
I stay in Maryland how do I get my phone to you to get it fixed?
King of jumper wire.👍
oh iphone ..god job
اخي أشكرك انا جدا معجب بك ( لدي نقطه دوما اعملها اضن انك تعلمها >>)لم لم تقوم بتوصيل النقاط فقط ويعمل لا حاجة من جمبر طويلا
My iPhone 8 Plus signal problem can u solve it
Sir microscope link in Amazon plz or it name.
hey man I have an Iphone 8 no physical damage looks perfect battery saying 0%, charge not taking any charge does detect the charger being pluged in.
Is this another tristar failure ?
i have the exact same problem, have you found out anything
fabelous work , keep going , Big up from an other world
Is it ok if the jumper wire touch all the component ?
Good work but where can I get the ice
brother amezsing job 😍
i just replaced battery and fixed it
Good job
I think you can skip the mosfit and jump the wire directly
With your skills. Wouldn't you make a lot more money in web development?
My phone is currently having same problem
It's not working so what should I do
So you dont have to strip the insulation on this wire???
Sam problem iPhone x howto riper
Saya dari indonesia ingin belajar teknisi handphone dari channel ini, saya berharap video kedepan bisa diterjemahkan ke bahasa indonesia, terima kasih
Can u be my teacher will u guide me
U r a Genius.. 🙏🙏😎
I have the same problem with my phone
Where to get every phone model board diagrams?
I like watching the repairs but every time you hold up the amp meter you can not see anything just the backlight. Maybe have a second cam and do picture in picture for certain bits? Keep up the good work
Really great.I solved many of my customers' laptop problems with your tips and videos.Your goodness is indescribable.Your friend .. from Afghanistan
How did the MOSFET go missing?
I need that microscope, I searched alot and didn't find😫
عمل الحترافي انت ملك
please add link or detail for your microscope camera and stand for it...
Art!
well damn good video, very informative, just wanted to ask you which microscope and camera are you using, like how many MP camera is that coz clarity is really good, please do share, tks
how to fix apple logo on/off iphone 6
Yes , impotent is data & clk battery con. Good job
what are the technical terms for the paste that used to do the soldering process also what was the intensity of your heat gun when you did the part replacement? please advise sending love all the way from jamaica
Paste is called flux
Battery lvl under microscope 😂
3 track missing solution
We want to translate the videos into Arabic, thank you ❤
The copper wire is really ugly。。。
EXACTLY