Maybe there needs to be an update to the script because the buttons for don't change color for solo and mute options. Also, record arm isn't one-touch enabled, I have to hold down the pad. same goes for solo and mute pad options. Not like how it's shown in the video. maybe i'm missing something?
Hi there. I think i fixed the mute and solo and record situation. If you go to the logic pro menu > control surfaces > controller assignments, a window pops up with the columns zone, mode, control and parameter. In Zone, select Pads, There is a menu all the way to the right with the section called Value. Under this section, there is "Mode" and it may be in Toggle. Switch to Rotate for each pad under each session.
@@LEUNN_ I just bought this thing bragging how easy its going to set up and then I was stuck on this for hours until I read your comment... thank you sir thank you so much I was digging my fingers into my head
Is it possible to send tempo information from my Logic project to the Launchkey mini mk3 to have the built-in arpeggiator adjust to the project tempo like it does in Ableton Live? Information on how to do this would be greatly appreciated!
Launchkey Mini [Mk3] can certainly sync an external clock source when connected via USB. Our tech support team can help you set that up, please get in touch - bit.ly/NovationSupport
1:30 I can only see two yellow lights (the first one from the video is off for me) and one blue one on the far right. It looked like this on every firmware so far, today I just updated to 1.1.2. Basically I don't know what you are talking about "session mode" but I can use the lights to toggle between default pad mode and custom pad mode. I can only have the default mode and one custom mode. Is there no way to save multiple custom modes? How do I make my device work like the one in your video?
Hi, we're sorry to hear you are having trouble. If you haven't already you should try installing the latest Logic script integration (Version 2.1) from the link below, then follow the rest of the steps in this video for getting started. downloads.novationmusic.com/novation/launchkey-mk3/launchkey-37-mk3 If you try this and still experience issue, please reach out to our support team at the link below for further assistance: bit.ly/NovationSupport
Have you installed the Logic Script as shown at the start of the video? Is your Launchkey connected directly to your computer via USB and not via a hub of any kind?
Just got my LaunchKey mini mk3, and it seems as though so many of these features are broken which is incredibly disappointing. I've run thru many of the solutions I've seen on reddit and via the Novation website and nothing seems to fix these issues. When I try to mute or solo a track it doesn't actually activate mute or solo. Another time after deleting preferences and running the script the drum pads stopped working all together. Also looks like, Novation hasn't really done very much communication on this being an issue or an ETA for a solution. Would love some help on this!
Hi there. I think i fixed the mute and solo situation. If you go to the logic pro menu > control surfaces > controller assignments, a window pops up with the columns zone, mode, control and parameter. In Zone, select Pads, There is a menu all the way to the right with the section called Value. Under this section, there is "Mode" and it may be in Toggle. Switch to Rotate for each pad under each session.
Rest assured, we're currently investigating this issue. Until then, alternate mapping can be created as explained here: support.novationmusic.com/hc/en-gb/articles/360017407400-Novation-product-compatibility-with-Big-Sur-on-Apple-Silicon
Are you referring to Launchkey Mini [Mk3]? If so, have you installed the script yet? Once installed, you should have the option to select it within Control Surface Setup, as shown here. The script is available to download here - downloads.novationmusic.com/novation/launchkey-mk3/launchkey-mini-mk3
@@NovationHelp I am having the same issue, the script has definitely been downloaded and i have tried multiple times, the launchkey mini just doesn't come up under the list of novation devices.
![โรงเรียนตอนตี 2 โคตรหลอน..!! [โรงเรียนไดเม่]](http://i.ytimg.com/vi/2MAEMwqVYh8/mqdefault.jpg)
![[Full Episode] The Restaurant War Thailand ศึกพ่อค้าซ่าแม่ค้าแซ่บ Episode 3 | 6 ต.ค. 67](http://i.ytimg.com/vi/fTfIMFVjt_8/mqdefault.jpg)
thank you for this video !
Why would you pull up Ultrabeat instead of drum machine designer?
Good answers only
Maybe there needs to be an update to the script because the buttons for don't change color for solo and mute options. Also, record arm isn't one-touch enabled, I have to hold down the pad. same goes for solo and mute pad options. Not like how it's shown in the video. maybe i'm missing something?
Same issues here bro, can't figure out what's going on either
Same issues here as well on Logic 10.5.1 - good to know others are experiencing as well :-)
Hi there. I think i fixed the mute and solo and record situation.
If you go to the logic pro menu > control surfaces > controller assignments, a window pops up
with the columns zone, mode, control and parameter.
In Zone, select Pads,
There is a menu all the way to the right with the section called Value.
Under this section, there is "Mode" and it may be in Toggle.
Switch to Rotate for each pad under each session.
@@isabelaviazzi7123 Worked, thanks a lot! Do you have any good solution for a Launckey cotroller assginment for live loops?
Can't even connect my new mk3 to Logic 10.5, is this a current issue? I don't even have the option show up to set the output port or input port
I think it may be (mostly) fixed. I finally just added mine. The pads seem to be set to the wrong octave, though.
@Ol Man 80zz same issue here, I'm not getting that window with input or output settings. Logic 10.5.1. Did you have any luck?
@@shallowack3803 enable the advanced control surface options in the preference menu
@@LEUNN_ I just bought this thing bragging how easy its going to set up and then I was stuck on this for hours until I read your comment... thank you sir thank you so much I was digging my fingers into my head
Is it possible to send tempo information from my Logic project to the Launchkey mini mk3 to have the built-in arpeggiator adjust to the project tempo like it does in Ableton Live? Information on how to do this would be greatly appreciated!
Launchkey Mini [Mk3] can certainly sync an external clock source when connected via USB. Our tech support team can help you set that up, please get in touch - bit.ly/NovationSupport
1:30 I can only see two yellow lights (the first one from the video is off for me) and one blue one on the far right. It looked like this on every firmware so far, today I just updated to 1.1.2. Basically I don't know what you are talking about "session mode" but I can use the lights to toggle between default pad mode and custom pad mode. I can only have the default mode and one custom mode. Is there no way to save multiple custom modes? How do I make my device work like the one in your video?
Hi, we're sorry to hear you are having trouble. If you haven't already you should try installing the latest Logic script integration (Version 2.1) from the link below, then follow the rest of the steps in this video for getting started.
downloads.novationmusic.com/novation/launchkey-mk3/launchkey-37-mk3
If you try this and still experience issue, please reach out to our support team at the link below for further assistance:
bit.ly/NovationSupport
The launchkey mini doesn't show up in the output or input port. Does anyone know a solution to this?
Have you installed the Logic Script as shown at the start of the video? Is your Launchkey connected directly to your computer via USB and not via a hub of any kind?
Just got my LaunchKey mini mk3, and it seems as though so many of these features are broken which is incredibly disappointing. I've run thru many of the solutions I've seen on reddit and via the Novation website and nothing seems to fix these issues. When I try to mute or solo a track it doesn't actually activate mute or solo. Another time after deleting preferences and running the script the drum pads stopped working all together. Also looks like, Novation hasn't really done very much communication on this being an issue or an ETA for a solution. Would love some help on this!
Hi there. I think i fixed the mute and solo situation.
If you go to the logic pro menu > control surfaces > controller assignments, a window pops up
with the columns zone, mode, control and parameter.
In Zone, select Pads,
There is a menu all the way to the right with the section called Value.
Under this section, there is "Mode" and it may be in Toggle.
Switch to Rotate for each pad under each session.
@@isabelaviazzi7123 i will give this a try. i still have the launchkey but have moved on to using other controllers.
@@isabelaviazzi7123 Thank you, your all solutions worked fine for me! Everything works like a charm!
Doesn't work with Big Sur M1. HELP!!!
Rest assured, we're currently investigating this issue. Until then, alternate mapping can be created as explained here: support.novationmusic.com/hc/en-gb/articles/360017407400-Novation-product-compatibility-with-Big-Sur-on-Apple-Silicon
not working now. Logic Pro 10.7.8 so well..
We're sorry to hear you are having trouble. Can you describe your issue in greater detail, we would like to help.
@@NovationHelp There is no Launchkey MINI tab in Control Surface Setup. Only Launchpad mini, pro, etc.
Are you referring to Launchkey Mini [Mk3]? If so, have you installed the script yet? Once installed, you should have the option to select it within Control Surface Setup, as shown here.
The script is available to download here -
downloads.novationmusic.com/novation/launchkey-mk3/launchkey-mini-mk3
@@NovationHelp I am having the same issue, the script has definitely been downloaded and i have tried multiple times, the launchkey mini just doesn't come up under the list of novation devices.
@@nickyladd9116 It's ;isted under focusrite products on mine. Still can't assign input/output though...