Hey guys! Thanks for joining me here again today! I’m so happy this deep clean on the inside of our Shark Rocket Cordless vacuum IS COMPLETE! I added “chapters” to this video where you can skip ahead and go back to different sections as needed. It’s kind of like “table of contents” that you can click on - it’s new to TH-cam videos (or at least it’s new to me 😝). Let me know if it works or doesn’t work - I’m still learning and your feedback will help me make adjustments if needed. Thanks ya’ll! I’m so GRATEFUL for you! 🖤 Love, Cathy
Not to be a nitpicker but a few drops of that dish soap right there would have made this whole process much faster and possibly even a wee bit cleaner as well. Pin-shaped soap molecules have one end that bonds with water (the hydrophilic head) and the other end that bonds with oils and fats (the hydrophobic tail). "When you build up a soapy lather, the molecules help lift the dirt, oil and germs from...[surfaces]"
That’s what I do. I know they say just use water but I feel like they just don’t get clean enough. The littlest filter gets black sometimes and plain water just does not cut it
I use old toothbrushes and very thin small round pointed knives and you would be surprised what your faucet sprayer full force can spray out of crevices. Also on the beater bar there’s a indent line that runs the full length of the bar. Run your scissors along that indentation to get under all the strings and hair and you’ll be able to clip them all at once then pull them off rolling the bar around.
Couple of further tips. You can remove the red section of the dust cup by undoing the 4 screws. You'll need the right driver of course, but that part will split into 2, and yiu will also be able to remove and wash the large rubber grommit that's in there too. It also makes the cup itself easier to clean too and you wont need to mess about so much with those hard to get too areas. Just soak it all in soapy water, towel dry excess water and leave it all to air dry properly for 24hours. The other thing is there is another filter in the red motor part, easily removed by pulling on where the cup attaches. This is made of paper, so you'll need a brush or something to get the dust out of that. Then just push it back in.
I saw a video the other day that was a game changer. It is titled Shark Rocket feature that NO ONE knows about that makes your life easier! You can hook the top part to the back part! Who knew!
Hi Mary! This is such a great tip and so timely too, because I need to clean mine again. I wish I could say I did it regularly…. I should… it would make it so much easier! I will definitely try the clean paint brush, thank you for sharing! 💕 Cathy
Your 4 minute mark, I agree. Fine dust gets trapped between the gasket and cover because the gasket surface was not completely covered with adhesive. The gasket surface should have been 100% covered with adhesive or, as you suggested, none at all. The wet dust increases the time required to dry, looks as dirty as it is and promotes the formation of mold and who knows what else.
Tip for your sink.. that could really shine up well with some universal stone. I love it for stainless sinks. One of my fave cleaning products. My clients used to looove when I came over.. 😂 a little elbow grease at first but then just maintain it.
Hi! I’m not sure, I haven’t cleaned my recently but I’ll take a look when I do! In the meantime, I hope other commenters have some ideas for you! Thanks for watching!
Really?! That’s so awesome to hear! I love not having to buy a new appliance… just keep on going little vacuum! Yay! Thanks for leaving me a note! 💕 Cathy
Did it sound like the motor was going? I bought one and had that problem and the company gave me a new one. Now both are sounding like the motor is going.
In the dust cup you know the colored part mine has water trapped in there from cleaning the dust cup. How do get the water out of there? I don’t think I can remove that part.
We just bought one recently and I accidentally used it to pick up the dog hair in the bathroom after giving them a bath. Now every time we turn it on to vacuum it smells like wet dog. Any tips to remove the smell without completely disassembling it?
Hi there, dogs are the best :) what kind do you have? Assuming you have already done the other things (clean the bin, clean the filters, etc) here are a few tips I found on chat gpt that may help you! Thanks for watching!!
Here are the other tips from chat gpt: Deodorize with Baking Soda: • Sprinkle a small amount of baking soda on the floor and vacuum it up. Baking soda is effective at neutralizing odors. • Alternatively, you can add a few teaspoons of baking soda to the vacuum bag or dustbin. 6. Use Essential Oils or Vacuum Cleaner Fresheners: • Put a few drops of your favorite essential oil on a cotton ball and place it inside the vacuum bag or dustbin. • Commercial vacuum cleaner fresheners can also be used; these are usually small scented beads or discs that you can place in the vacuum.
Our smelled like dog as well. The only solution was unscrewing those 4 torx screws and taking the dust cup apart. You wouldnt believe this stinky wet dirt inside. I still can’t get the smell out of the plastic 100% but it’s a lot better.
I am in the middle of cleaning mine now. Is there a way to clean out those tiny wheels that get pet hair wrapped around them? I am using a tweezers to pull the hairs out. Still pulling. 😂
Hi! Tweezers and/or toothbrush is all I can think of! Hopefully you are all done now 😃 And maybe someone else may comment and share some good ideas. Thanks for watching! 💕
That would be so cool! I don’t think mine is that version, but I may look for that feature whenever it’s time to buy another one!! Thank you for watching!! 💕 and for commenting :)
I don’t think I’ve ever done that! I’m sorry I can’t help. Hopefully someone else reading the comments will comment and help you! Thank you for watching! 💕 Cathy
@martiohmart8399 they purposely make these so that they don't come apart. That way you need to buy a new one. Mine is only 6 months old and desperately needs to be taken apart of the deep cleaning, but I don't see how it can be done.
Hmmm I don’t know but it’s about time to clean mine again so I’ll come back and let you know if I figure it out!! Thanks for watching and commenting! If I can’t figure it out I hope someone nice reading this will reply with a tip for you! 💕
This is exactly why I watched this video. It was helpful, but didn’t address the biggest issue I have which is the clear cover. I’ve been tempted to run water through it too.
Ive just posted about this as I done it myself a couple of days ago... You can remove the top section of the dust cup by undoing the 4 screws. You'll need the right driver of course (Torx I think its called, its like a six point star) ), and that part will split into 2, you will also be able to remove the large rubber grommet that's in there too. It also makes the cup itself easier to clean, solves those awkward areas, just use a shower head or whatever on it and / or soak it all in soapy water, towel dry excess water and leave it all to air dry properly for 24 hours. There is another filter in the red top motor part, easily removed by pulling on where the cup attaches. This is made of paper, so you'll need a brush or something to get the dust out of that. Then just push it back in.
A few viewers mentioned using a wet dry vac or shampooer to suck up excess soap/water afterwards would be good. I think that is a great tip and i will def do that next time I have a big stain!
Scott found this on Amazon- maybe it will work? amzn.to/3PHLKf9 HQRP 2-pack Filter Kit fits Shark Rocket DuoClean series HV380, HV380UK, HV380UKT, HV380W, HV381, HV381C, HV382, HV384Q Vacuum Cleaner
@@ruhi15285 Turn the flat floor plate containing the 2 wheels upside down. Then you will see the silver axle holding the wheel in. Take a flat screwdriver and push gently down on the axle where there is a gap and it will pop out one side. Then you can lever the wheel out with the screwdriver from underneath the rubber tire. Do the other side and you can just push them back in when clean. Pay attention to the length of the axles as they are not equal both sides so as to put them back in the same way
Hi Molly! Yes I love it! I was hesitant at first because I loved my other shark, which I still have, because it’s old fashioned, with a cord and all of that. And this one is so lightweight it took some getting used to, but in a good way because now it’s my favorite vacuum. I love the price point too - I didn’t feel like I was breaking the bank to upgrade to cordless! Have a wonderful day Molly!! 💕
@@LivingGratefully I appreciate your response and understanding. I now have an amazingly clean vacuum-Thank you! Your voice is lovely so I found the music unnecessary and distracting.
Hey guys! Thanks for joining me here again today! I’m so happy this deep clean on the inside of our Shark Rocket Cordless vacuum IS COMPLETE! I added “chapters” to this video where you can skip ahead and go back to different sections as needed. It’s kind of like “table of contents” that you can click on - it’s new to TH-cam videos (or at least it’s new to me 😝). Let me know if it works or doesn’t work - I’m still learning and your feedback will help me make adjustments if needed. Thanks ya’ll! I’m so GRATEFUL for you! 🖤 Love, Cathy
Yes! This is a great idea as it breaks it down and my brain needs that 😂🥴❤️
Not to be a nitpicker but a few drops of that dish soap right there would have made this whole process much faster and possibly even a wee bit cleaner as well. Pin-shaped soap molecules have one end that bonds with water (the hydrophilic head) and the other end that bonds with oils and fats (the hydrophobic tail). "When you build up a soapy lather, the molecules help lift the dirt, oil and germs from...[surfaces]"
That’s what I do. I know they say just use water but I feel like they just don’t get clean enough. The littlest filter gets black sometimes and plain water just does not cut it
I use old toothbrushes and very thin small round pointed knives and you would be surprised what your faucet sprayer full force can spray out of crevices. Also on the beater bar there’s a indent line that runs the full length of the bar. Run your scissors along that indentation to get under all the strings and hair and you’ll be able to clip them all at once then pull them off rolling the bar around.
This is terrific. I'm wondering how to replace the filter cup though?
We bought a refurbished Shark stick vacuum - no instructions. Your video made it clear how to clean it. Thanks!
You’re welcome! Glad it helped! Thank you for watching & leaving a comment!
I’m curious, How many vacuums do you have? I have 3 😊 plus the wet/dry vac but I consider that Scott’s because I don’t like that thing!
How about an exhaust filter? Should that be cleaned once a year. Great video thanks
Couple of further tips. You can remove the red section of the dust cup by undoing the 4 screws. You'll need the right driver of course, but that part will split into 2, and yiu will also be able to remove and wash the large rubber grommit that's in there too. It also makes the cup itself easier to clean too and you wont need to mess about so much with those hard to get too areas. Just soak it all in soapy water, towel dry excess water and leave it all to air dry properly for 24hours. The other thing is there is another filter in the red motor part, easily removed by pulling on where the cup attaches. This is made of paper, so you'll need a brush or something to get the dust out of that. Then just push it back in.
Great tips thanks so much Karl!!
I saw a video the other day that was a game changer. It is titled Shark Rocket feature that NO ONE knows about that makes your life easier! You can hook the top part to the back part! Who knew!
ooooh interesting I'l have to check it out! thanks!
where do u get the screw drivers?
Thank you for this simple video on cleaning and putting back together the shark stick vacuum. Just what I needed.
Yay! You’re welcome! Thank you for the nice message!
Use a clean paint brush. It will get in most crevices. I clean mine regularly.
Hi Mary! This is such a great tip and so timely too, because I need to clean mine again. I wish I could say I did it regularly…. I should… it would make it so much easier! I will definitely try the clean paint brush, thank you for sharing!
💕 Cathy
Great video ! 😍 I have a quick question could I try to speed up the drying process by using a blow dryer ? Or maybe the dryer ?
I think that would work!!
Your 4 minute mark, I agree. Fine dust gets trapped between the gasket and cover because the gasket surface was not completely covered with adhesive. The gasket surface should have been 100% covered with adhesive or, as you suggested, none at all. The wet dust increases the time required to dry, looks as dirty as it is and promotes the formation of mold and who knows what else.
So glad I’m not the only one! Thanks so much for watching!!
Tip for your sink.. that could really shine up well with some universal stone. I love it for stainless sinks. One of my fave cleaning products. My clients used to looove when I came over.. 😂 a little elbow grease at first but then just maintain it.
Great tip! Thank you for sharing!!! 💕
…Do you buy yours frown Amazon? About $37? Or can you get from a hardware store? Thx!!! 🙏
How do you clean the little tube piece that sits on the inside of the lid? Mine is so dirty there and washing is hard because it doesn’t drain.
Hi! I’m not sure, I haven’t cleaned my recently but I’ll take a look when I do! In the meantime, I hope other commenters have some ideas for you! Thanks for watching!
such a helpful video. My vacuum works much better now. I thought it was broken but after watching this video I realized all I had to do was clean it.
Really?! That’s so awesome to hear! I love not having to buy a new appliance… just keep on going little vacuum! Yay! Thanks for leaving me a note! 💕 Cathy
Did it sound like the motor was going? I bought one and had that problem and the company gave me a new one. Now both are sounding like the motor is going.
Yesss this is what I needed! Thank you so much & have a wonderful day! 🤗❤️
Thank you for the vid! I feel like Monica all the time and I’m not complaining 😂😌
You’re welcome! Lol! It’s not a bad thing to feel like Monica! 💜 thanks for watching and leaving me a comment!! Cathy
In the dust cup you know the colored part mine has water trapped in there from cleaning the dust cup. How do get the water out of there? I don’t think I can remove that part.
We just bought one recently and I accidentally used it to pick up the dog hair in the bathroom after giving them a bath. Now every time we turn it on to vacuum it smells like wet dog. Any tips to remove the smell without completely disassembling it?
Hi there, dogs are the best :) what kind do you have? Assuming you have already done the other things (clean the bin, clean the filters, etc) here are a few tips I found on chat gpt that may help you! Thanks for watching!!
Here are the other tips from chat gpt: Deodorize with Baking Soda:
• Sprinkle a small amount of baking soda on the floor and vacuum it up. Baking soda is effective at neutralizing odors.
• Alternatively, you can add a few teaspoons of baking soda to the vacuum bag or dustbin.
6. Use Essential Oils or Vacuum Cleaner Fresheners:
• Put a few drops of your favorite essential oil on a cotton ball and place it inside the vacuum bag or dustbin.
• Commercial vacuum cleaner fresheners can also be used; these are usually small scented beads or discs that you can place in the vacuum.
Our smelled like dog as well. The only solution was unscrewing those 4 torx screws and taking the dust cup apart. You wouldnt believe this stinky wet dirt inside. I still can’t get the smell out of the plastic 100% but it’s a lot better.
I am in the middle of cleaning mine now. Is there a way to clean out those tiny wheels that get pet hair wrapped around them? I am using a tweezers to pull the hairs out. Still pulling. 😂
Hi! Tweezers and/or toothbrush is all I can think of! Hopefully you are all done now 😃 And maybe someone else may comment and share some good ideas. Thanks for watching! 💕
You can pry the wheels up a bit and pull the pins out.
Do you have the anti hair wrap version over where you are? Loss less of a faff cutting! 😍❤️
That would be so cool! I don’t think mine is that version, but I may look for that feature whenever it’s time to buy another one!! Thank you for watching!! 💕 and for commenting :)
How do you remove the roller? I can’t figure that part out. Thank you for sharing.
I don’t think I’ve ever done that! I’m sorry I can’t help. Hopefully someone else reading the comments will comment and help you! Thank you for watching! 💕 Cathy
There are 3 grey colored screws. It looks like a flat head but wider.
@@olympialopatin1115 thank you for your help I will try it out
@martiohmart8399 they purposely make these so that they don't come apart. That way you need to buy a new one. Mine is only 6 months old and desperately needs to be taken apart of the deep cleaning, but I don't see how it can be done.
Thank you for reminding me to clean my vacuum!! I have a cordless one made my Eureka. I love it! I might just clean my tonight.
Woohoo way to go Terri! It feels so good once it’s done! Great to hear from you! 😘
Every time I clean my vacuum cleaner I think of Monica vacuuming her vacuum cleaner 😂
Lolol! I love Monica so much! I love how we can relate to her and laugh at ourselves :) :) Have a beautiful day!
A old toothbrush might be handy for the inside
Great tip!! Thanks for watching! This reminds me I need to clean this vacuum again!! Cathy
How do you wash the top of the very bottom piece? The clear part above the brush. Mine has dirt and I can't take the brush off to clean it
Hmmm I don’t know but it’s about time to clean mine again so I’ll come back and let you know if I figure it out!! Thanks for watching and commenting! If I can’t figure it out I hope someone nice reading this will reply with a tip for you! 💕
I’m needing help with this too, any update? I’m tempted to run water through it
This is exactly why I watched this video. It was helpful, but didn’t address the biggest issue I have which is the clear cover. I’ve been tempted to run water through it too.
Ive just posted about this as I done it myself a couple of days ago...
You can remove the top section of the dust cup by undoing the 4 screws. You'll need the right driver of course (Torx I think its called, its like a six point star) ), and that part will split into 2, you will also be able to remove the large rubber grommet that's in there too. It also makes the cup itself easier to clean, solves those awkward areas, just use a shower head or whatever on it and / or soak it all in soapy water, towel dry excess water and leave it all to air dry properly for 24 hours.
There is another filter in the red top motor part, easily removed by pulling on where the cup attaches. This is made of paper, so you'll need a brush or something to get the dust out of that. Then just push it back in.
Very good video! Thanks
You’re welcome! Glad you liked it!
Hi Cathy, just found your channel!! Love the motivation!! Sending you much love and support from Georgia!! Kristin 🤩❤️👍🏼
Welcome Kristin!!! I’m so glad you found Living Gratefully!!! Thank you for the love and support and I’m sending some right back to you! 💕 Cathy
@@LivingGratefully that’s very sweet, thank you 😊 💕❤️💗I hope your day is a good one!!! 😍🥰❤️
Yes, well, the coin does not work. It took me 2 hours to get lugges out. And by that time, they were so damaged. They would not go back in😢
Nice vid. Thank you
Doing this tomorrow!!
Best of luck!!! 💕
A few viewers mentioned using a wet dry vac or shampooer to suck up excess soap/water afterwards would be good. I think that is a great tip and i will def do that next time I have a big stain!
Loved this video x
Thank you!!! I appreciate you watching and for commenting!!! More than you know!
I am trying to find the filter for the HV 382. Someone help please
I wish I could help but hopefully someone sees this and helps you!!
Scott found this on Amazon- maybe it will work?
amzn.to/3PHLKf9
HQRP 2-pack Filter Kit fits Shark Rocket DuoClean series HV380, HV380UK, HV380UKT, HV380W, HV381, HV381C, HV382, HV384Q Vacuum Cleaner
without taking the upper "cup" section apart with tamper proof "t" bits you will just leave a place for mold to grow - I bet it smells rude.
What about the clogged hair in those wheels?
I have the same question
@@ruhi15285 Turn the flat floor plate containing the 2 wheels upside down. Then you will see the silver axle holding the wheel in. Take a flat screwdriver and push gently down on the axle where there is a gap and it will pop out one side. Then you can lever the wheel out with the screwdriver from underneath the rubber tire. Do the other side and you can just push them back in when clean. Pay attention to the length of the axles as they are not equal both sides so as to put them back in the same way
I've been intending to ask you about your stick vacuum. Are you happy with it? 🎃 Another great video! Thanks Cathy!🍂
Hi Molly! Yes I love it! I was hesitant at first because I loved my other shark, which I still have, because it’s old fashioned, with a cord and all of that. And this one is so lightweight it took some getting used to, but in a good way because now it’s my favorite vacuum. I love the price point too - I didn’t feel like I was breaking the bank to upgrade to cordless! Have a wonderful day Molly!! 💕
An old toothbrush works wonders in hard to reach places..
Great tip! I hadn’t thought of that, Thank you!! 💕
you forgot a filter
Where? Let me know! Thanks!!!
Ugh I've been putting this off forever. The filter was disgusting! Hoping it works better again after this.
I bet it feels good to have it done! Hope it works better for you too!
Very pretty older lady. Your husband is a very lucky man..
Use a tooth brush
good tip!
Great video but could do without the music selection
Thanks for watching and Thank you for your feedback! 💕
@@LivingGratefully I appreciate your response and understanding. I now have an amazingly clean vacuum-Thank you! Your voice is lovely so I found the music unnecessary and distracting.