EARN 360k - PDR Training Class
ฝัง
- เผยแพร่เมื่อ 7 เม.ย. 2024
- All Electric cars and trucks get Dents. Today's PDR Training Class I’m going over the six figure income and How to remove a Large Complex Dent.
Training Email Me
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Trim Removal Set
amzn.to/3zE8J3x
Torch
amzn.to/3MOqXSF
Mychanic rolling stool
amzn.to/3NSPLuh
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun... - ยานยนต์และพาหนะ
For sure you're making miraculous job
I'm a new subscriber
Hope you will reply to my comment
And I'm already blown away how can you do this type of ART ?
Maybe PDR will be my new passion
I'm 36 years old now, is it already late for someone my age to learn this ?
If not, then ... where and how to start learning ?
Is it an online course ?
The technic level in your videos seams impossible to achieve...
You're literally a super talented artist.
Hope to seeing every new content, information and experience sharing on your amazing youtube channel.
PDR training Send me a message through this site.
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
New subscriber here, I'm a lady and want to start pdr career. Love your videos
This needs to be taught in schools
You’re absolutely correct. It is evolving that direction.
Thank you for your comment
Impressive work! Before finding your channel by accident years ago, I wouldn't have guessed such a repair was possible!
Mr lethal thank you for your comment.
I agree. Before running across the Man of Steel I thought it couldn’t be done.
Absolute legend
Amazing and inspiring work 👌👌
Thank you for your comment
Excellent repair Ken!! Great finish work
Better repair thank you I appreciate that
You ain't the King of dent repair, you are the Kaiser! 👍
JD thank you
Very interesting vid. As usual on your channel. Thx a lot for showing !😊
Mr. Hancock. Thank you for your comment.
@@DentDiscountPDRBodyShop my pleasure !
I have a couple of dents on my 2016 Pajero and I just found out about this PDR technique that I just found out. At first I was a bit sceptical about it, but I just had to pull the trigger and call a PDR guy to my house since the dents is really buggin my eyes out lol. And once they were done, I was very very impressed by how its done, all the technique, the tools etc. And this last few days I've been watching a bunch of PDR videos, and the more I watch it, the more i think that PDR its not just about fixing dents, hammering steel, punching etc, but there's more of an art aspect into it. Keep up my man. Love watching your videos.
Top notch work man. I need to come to your trainings. 💪🏼
Keep it up with this great work!
Thanks, will do! Arthur
Really your the Man of Steel!, honestly you’re the best!
Efrain thank you I really appreciate that
love the intro !!!!! love your work !!!!! INCREDIBLE !!!! Hello From Melbourne Australia !!!!!!
What’s up Mr. Maz thank you for your comment
Nice repair as always, and great you are showing guy's your approach ! Greets Jonathan
Right on Jonathan, thank you
I really like your retention tooI I use it all the time.
You are a true Master of restoration!
Carl thank you very much
Nice work !!!!!
Mark thank you
I worked in a mom and pop Shop. A long time ago. Mr Mac would lead in the big spots and then bondo bondo . I did some good bondo jobs but just what I dented up and had to fix. Maybe that’s why I like drywall work.
Joe, I’m right with you. I like drywall work as well in addition to putting up walls and crown work
Man you are from o the world … Man of still! You’re an artist
Thank you I appreciate that
This guy is good. No doubt. Takes INCREDIBLE patience.
Hey what's good man it's my first time watching and I'm 26 and looking at this is motivating me to learn how to and start my own company one day. I will continue watching your videos Man of steel 🤜
Welcome aboard!
This guy works magic. Learn all you can from him.
Awesome work bro.
Been thinking about starting PDR . Used to do body work long ago and your technique is really inspiring. I’m looking to get a beginners kit and my buddy has some cars I can practice on and there is high demand on my island
PDR training Send me a message through this site.
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Beautiful work, just beautiful
Thank you
great work!
Thanks a lot!
Man you are amazing great job
Tony, thank you
What a great job!! 😮😮😮👏👏👏
Thank you! Cheers!
Awesome video and amazing work and takes a trained eye to do it right.
I have really struggled to get any decent glue sticks where i live overseas and most seem to come off half way through pulling the dent and it will stick to vehicle or it will stick to the tooling
You can do it! Glue I use on this link
pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/
Do you have someone that you have trained or recommend in the Portland Oregon area? I’m having a hard time finding someone to fix my ride. Thanks,
Nice work
Eugenius thank you
I'm a new subscriber and am fascinated by your work! I have always used a body dolly kit and fiberglass filler because that's how I was raised. I have a 2007 toyota matrix with a bent front frame rail..I would love to see a video on how you would tackle that. Thank you!
Welcome to my channel thank your sub
Que genio! Veo tus vídeos desde Argentina
Wow excelentes trabajos de hojalatería😮👌👍
Saludos desde Xalapa Ver. México
Juan thank you
Que tiempo aproximado te tomo esa reparación sin incluir el video y la edicion de este?
Victor, thank you for your comment
Your the man,,thanks for sharing,,,❤
You bet thank you for your comment
How many actual hours did it take you to repair from start to finish
?
Saludos desde Argentina exelente video como siempre ❤
Carlos thank you I appreciate that
Good job 👍
Thank you
true artist!
Thank you my friend I appreciate that
I’m about 6 months in working in a production environment. Doing light to medium hail. I aspire to be on the same level as you, Mike Toledo, and Brice Kelly.
Well thank you for you for your comment
On the vehicles with plastic parts like bumpers dose this work
You can take Dents out of Bumpers. we do it all the time
Your a legend!
First name. Thank you for your comment.
What glue do you use? I have not found a good one yet.
Glue I use
pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/
Sehr gute Arbeit.
Thank you I appreciate your comment
Enlightened, teacher
Hello. Can you make a video with a hood dent (with big ones) Thanks
How hot is too hot to damage the paint? What temperature degree is too hot to damage the paint? Thanks.
It’s safe to go up to 200 degrees
Amazing
Is this job still worth getting into? I'm moving to the East Coast and this might be something I want to do when I get there. Used to play Warhammer so I think I got an eye for detail for this line of work.
PDR training Send me a message through this site.
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Does regular hot glue work or do you use hot glue specifically for body work?
After you purchase the glue, you’ll need special instructions
After your purchase, you can email me
Glue link
pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/
Отличная работа ! Супер Мастер ! Я Восхищаюсь!!!
Thank you
Is the estimate app available to purchase?
New Subscriber how can I learn this skill set and how much is the training?
awesome!
Thank you! Cheers!
Where can get your pricing app from amazing repair as usual 💪🏻💪🏻💪🏻
Mobile tech RX
Badass I saw the same truck at a dent shop , what’s the man hrs for that job
Thank you for your comment
Look buddy i do it differently which i do a good job but my man your on a different level well done
Thank you for your comment my friend
دمت گرم کار درست
What hot glue You using?
Glue I use
pdr-training-tools.com/en/products/glue-glue-guns/20/glue-pack-of-10/
Videoları sabırsızlıkla bekliyorum 😊
I appreciate your comment
Work of a true craftsman! Nice work Ken.
Keith, thank you for your comment
Крутой Мастер , работа Супер !!!
I appreciate that
Mega Dent Sir Nice Tank You
Thank you for your comment
Know Dent Patrol L.A? Sir 🫡
did i understand right? 6k for this repair?
Did you get to watch the whole video? It showed $5900 on the estimate on my app.
Thank you for your question
How many hours you spend it in this repair?
I write estimates for a living. Over 10 years experience. For a typical unibody truck, Ridgeline, Avalanche, etc, I'd expect this repair to be closer to $4k. However, that's if the Rivian part isn't an outrageous price, and considering a midwest rate vs ridiculously high CA rates, and it doesn't consider the cost of a rental during a conventional repair. Add rental and a ridiculous part markup (common w EV only brands), and I'd say between $4-6k is legit for a total of all collision repair related costs.
I also have a degree in Entrepreneurship...IMO, I'd price this repair between $2-4k for a non-conventional, PDR + touch up paint repair in a midwest state. So IMO, it's more likely a gross $3k job for PDR, not $6k.
Having said all that, this is definitely a better method of repair, no parts replaced means no parts on backorder to delay the repair, and PDR means saving a few weeks on rental costs.
It's still a better repair doing it this way. But to run a business, I'd expect about $1800 net on this repair BEFORE paying taxes. Still...that's about $1200 for a single day's work. Can't beat it!
@notdarrell This isn't a 1 day repair, and like you said it's value especially in CA is worth $6k+++
The replacement cost for that panel is over $40k when done to Riviian procedures.
In my opinion it's worth more than $6k with all the advantages a PDR repair provides, regardless of the amount of time it takes.
Great video and amazing repair Ken! $6000 is a bargain from what I've heard about the repair costs on these Rivians.
Very true! Thank you for your comment
Beautiful
Thank you
Can you comment on time to cost ratio
Depending on your speed, you can fix it and one to two days.
3k-6k. Thank you for your question.
Where can i get tools for this job?
Here you go Pdr-Training-tools.com
I have trouble blending but I would do a PDR
Right on
I am a student in the car repair service. Can you give me some advice, teacher?
PDR training Send me a message through this site.
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Extremly smart.
Thank you
How do you do your estimates
Use Mobile Tech RX app
master 😎 Can I do the training with you? What are the details?
Here you go www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Это шедевр!
Thank you for your comment
People only worry about the price. Take that to rivian and most likely that’s a 20k job total lost for the insurance. And stay without your car for a month or 2. Is worth every penny brother great job.
Thank you for your comment. I appreciate it.
Amazing jop
Thank you, Hector
Esa reparacion definitivamente no es apta para cualquier tec. Dejar esa terminacion tan impecable muchísimo menos. 🎉🎉🎉🎉
Victor, thank you for your comment
How long was the total time to repair this dent
Solid 12 hours
سلام دمت گرم
Thank you
Saw the thumbnail and thought you were taking about manual birth control for a second :o
Laugh out loud, Mr. sniffer love it Great Comment
Hi to the man in Steel
Thank you
👍
Back at you buddy thank you
😮ok
Thank you for your comment
I'm thinking of investing in this kind of business in my area only 4 locations in a 100 mile spread of my location
Lots of money!!PDR training Send me a message through this site.
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
I'm Brand New. I can do this. Especially with my background
Gordy, thank you for your comment welcome to my channel. Yes, you can do this you’re the “man”
👍🏼👏🏼
Thank you
Dang, that's impressive at 4:00 I would have gave up, and pulled out the filler.
MoVaughn, thank you for your comment. Sometimes I do feel like giving up on the big dents.
How did you come up with $6000 ?
I've been a PDR tech for 25+ years & I've been in body shops for most of that time..
Unless the owner kicked in a lot of money with the insurance claim , I dont see how you ever got $6000..
You could replace that entire panel for less than 6k ...
Break it down for me ...
You can read the other comments. Sounds like you’re leaving a lot of money on the table. The top pdr guys I talk to get 5K-10k average. My app I get 6k average. I’m working on getting more. Rivian procedure 40k to replace.
Thank you for your comment
Help Matt’s off road un-do some damage he just did on his last video
Sounds like a great idea I like it
@@DentDiscountPDRBodyShop the reason I ask is he damaged his future project on one of his vehicles shooting a video and it really bummed him out plus he had a large following maybe good for both parties. I’m just a follower from both channels and think that you are the man for the job
Мой кумир💪
Thanks for your comment
In the title it says 100% pulling out but it wasn’t all glue pulling
Brad thank you for your comment
You busted him Brad!! Good detective work!
Collision shop would be like 15k to repair that particular vehicle. It’s one giant aluminum panel. Incredible work as always. Wish I would ah e gotten into this when I was young
Thank you for your comment
It’s closer to $40k to replace that panel, and it’s steel not aluminum
@@Chandler34 holy shit. I thought I saw 15k somewhere. And thanks for the correction, I thought rivians were aluminum like Teslas
@@ridenfish39 some of the panels are aluminum but those bedsides are steel. And that panel is so expensive because it’s the bedside and then goes all the way up the cab corner and the roof rail and it’s all one giant piece.
@@Chandler34 pretty stupid design imo. I’m sure they total them a lot because of the repair costs
6k? Worth every penny
Gizmo great comment. Thank you.
TOOLS for repair Pdr-Training-tools.com
hello why don't you heat it up it will be easier to work
You didn’t see the heat gun in the video?
팔뚝무엇
Молодец!
Thank you for your comment
Looks like you left a woodpecker in there.
Thank you for watching my video
6k to still have fucked up paint and weaker metal 😂 at least paint the thing it’s all chipped and scratched up
PDR training Send me a message through this site.
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
How to get tools
You all could believe this shit all you want to he is not being honest with y’all, for a repair this big you have to do bondo on it.
It's because you have never seen or experienced what a great pdr guy can do.
@@cnturion79 what is you talking about I fix cars for a living And am telling y’all he’s not being honest with y’all there’s more to the eyes he’s not showing. I dent that big have to be repair with bondo
Welcome to next level my friend
Where i can get the estimate app? And how long it takes to repair this? Thanks and btw a great and clean finish 🔥🫡🫡🫡
Amazing
Thank you! Cheers!