OMG… Left me breathless. Not only is the finish of the helicopter perfect but also the mechanic who tuned everything up did an absolute amazing job… The tracking is perfect balancing everything is nicely tuned. I may have just seen the most perfect Hughes 500e ever. They sure are sporty… I just purchased one but no not like yours LOL… It's pretty the one I have coming it is in the mail … I could not resist the Hughes 500e which I love so much is just smaller not as expensive but is still going to be cool. Such a nice looking helicopter I had to get one
That was a beautiful flight! So smooth and round. I love especially these super slow rolls and the smooth direction changes after the turns and circles. Heiko Fischer is a great pilot and the camera work is as well amazing!
Absolutely amazing, the model, the flying 👍🏻👍🏻... Sounds and flies like the real thing. RC scale helis don't usually bank left or right like a real heli, but this one does it so flawlessly. Amazing.
@@edwinthomas618 ☠BLACK BARON☠ Some "believe" you need a very heavy weight and a very large scale model to replicate "Air Smoothness" in RC Aero Dynamics. Personally, iLike very smooth takeoffs and landings. That's the key in scale flying. The ending of a flight presentation, the landing is ... "Das Tüpfelchen auf dem i" as you say in German. For sure, he's an acrobatic pro flyer who learned a lot from his father. I've missed a pirouette in his flight presentation.
Absolut topp! Sehr schön dynamisch geflogen aber trotzdem weich und rund. Die Einwände ein scale heli macht keine Rollen und loopings - ja gut, irgendwas kann man immer meckern 😅
Very nice!! I’m familiar with Vario helis. Is this using 800mm blades. So nice you have the tree line behind it making those fff passes. The power of the turbine is evident. Mine were using rc230, gas. We have a similar flying style - large maneuvers.
This is a really nice RC helicopter where did you buy it at? And how much did you get it for and me? I actually never ride a RC helicopter but I would love to learn how to ride it with the controller and also do you know anyone that teaches how to ride a RC helicopter with the controller because I wanna learn how to ride it
@@ChrissiRC Thanks I have a 800 size Roban MD500 Ive wanted to try a loop or roll but was worried it might crash I have -3 deg. Do you know if the blades on that Heli are flat bottom or symmetrical?
Really?? Your pattern is too agressive for that baby in my case I never do it, that baby is for over ground walk around or maiden fly.😮😅. Thank you for share that baby but one tip is maiden preserve you baby. Enjoy that monster. 🎉😉
Wow what an amazing showcase of the beautiful 500E ❤💪
Beautiful flying!
Wow what a stunning flight....
Bad ass!
Danke für das coole Video von meiner Hughes! :)
Beautiful and great flying
OMG… Left me breathless. Not only is the finish of the helicopter perfect but also the mechanic who tuned everything up did an absolute amazing job… The tracking is perfect balancing everything is nicely tuned. I may have just seen the most perfect Hughes 500e ever. They sure are sporty… I just purchased one but no not like yours LOL… It's pretty the one I have coming it is in the mail … I could not resist the Hughes 500e which I love so much is just smaller not as expensive but is still going to be cool. Such a nice looking helicopter I had to get one
hermoso helicóptero rc y muy buen piloto felicitaciones!!
Flying it like you stole great flight thank you!
That is a rad heli well done👍
Beautiful helicopter and very nice flying!
Awesome Flying!!
Wow, the next level!!! Ich werde es solang üben bis ich so high Level mit meiner MD500 fliegen kann wie Heiko.
Very wonderful rc heli gooood joooob
I fly the original 500E myself - it looks really good - respect.
Cool 👍
Kurz: Beeindruckend !!! Video, Flug und Maschine.
That was a beautiful flight! So smooth and round. I love especially these super slow rolls and the smooth direction changes after the turns and circles. Heiko Fischer is a great pilot and the camera work is as well amazing!
Thanks a lot 🙏🏻
As an avid aero modeller over approximately 45 years, I can say that was a beautiful flight with near perfect precision!
Hats off to you Sir!
👍👍👍
Genial schöner Heli! Spitze geflogen, da gibt's nicht mehr zu sagen. Cheers vom Sven🍺
I wish I had this helicopter.
Nice work mate. That's how you fly a scale Hughes 500
Sehr schöne Maschine 😎
Absolutely amazing, the model, the flying 👍🏻👍🏻... Sounds and flies like the real thing. RC scale helis don't usually bank left or right like a real heli, but this one does it so flawlessly. Amazing.
Schöne Flugaufnahmen von dir Chrissi. Und super sauber geflogen vom Heiko 😊👌
Danke dir!
Proper flying - well done (vs a simple orbit at slow speed)
Ummm what you described is proper scale flying. Btw Its harder to fly slow and replicate scale flying.
@@edwinthomas618 ☠BLACK BARON☠ Some "believe" you need a very heavy weight and a very large scale model to replicate "Air Smoothness" in RC Aero Dynamics. Personally, iLike very smooth takeoffs and landings. That's the key in scale flying. The ending of a flight presentation, the landing is ... "Das Tüpfelchen auf dem i" as you say in German. For sure, he's an acrobatic pro flyer who learned a lot from his father. I've missed a pirouette in his flight presentation.
Superschönes Modell und gute Flugvorführung samt Rollen und Rückenflug. 👍 In der realen Heli-Welt wird dieser Hubschrauber SPORTS CAR genannt.
I truly wish Roban offered this paint scheme.
Absolut topp! Sehr schön dynamisch geflogen aber trotzdem weich und rund. Die Einwände ein scale heli macht keine Rollen und loopings - ja gut, irgendwas kann man immer meckern 😅
Very nice!! I’m familiar with Vario helis. Is this using 800mm blades. So nice you have the tree line behind it making those fff passes. The power of the turbine is evident. Mine were using rc230, gas. We have a similar flying style - large maneuvers.
Puh I don’t know if he used 800 blades. But ich think, the blades are from Witte helicopter, too
Wow that’s Amazing I would love to have one of those . What’s the price of this heli ..if you don’t mind asking .i want one
Ask rchelicopterservice! It’s from hö
This is a really nice RC helicopter where did you buy it at? And how much did you get it for and me? I actually never ride a RC helicopter but I would love to learn how to ride it with the controller and also do you know anyone that teaches how to ride a RC helicopter with the controller because I wanna learn how to ride it
You can buy and learn it by the pilot Heiko Fischer from rchelicopterservice.de 😉
What head and blades do you have on that?
Hello do you how much negative pitch this Heli has?
Yes, -4 degrees
@@ChrissiRC Thanks I have a 800 size Roban MD500 Ive wanted to try a loop or roll but was worried it might crash I have -3 deg. Do you know if the blades on that Heli are flat bottom or symmetrical?
@@Ride-Fly better you have symmetric blades
@@ChrissiRC Yea that would be better
What are max EGTs of the turbine while flying these maneuvers?
What FBL do you use?
Sorry I don’t know
Symetical blades?
I think
Thats how you fly a scale Helicopter!!!! KUDO's
Es geht nichts über den Sound einer Turbine.😉
Stimmt 😉
How much $?
You can ask helicopter rchelicopterservice!
Really?? Your pattern is too agressive for that baby in my case I never do it, that baby is for over ground walk around or maiden fly.😮😅. Thank you for share that baby but one tip is maiden preserve you baby. Enjoy that monster. 🎉😉
Bit ridiculous seeing a scale civilian heli doing loops and barrel rolls. Fly a plank if you want to do those things. Not for me.
thank you for your opinion! it's not for everyone. But It’s a Hughes ☺️
Civilian helicopters can do loops and rolls though. 🤷🏻♂️
I was impressed by his scale flying style. He did large maneuvers, not 3D. And, a H500 is the Porsche of light helis and capable of aerobatics.
My sentiments exactly. Like a scale heli was thrown into the hands of a 3D pilot. Great flying but not of a proper MD500
😂😂, I see little envy here....
What head and blades do you have on that?
What head and blades do you have on that?
What head and blades do you have on that?