Belt Weigh feeder | Application & operation | Hopper discharge vibratory chute | Part description |

แชร์
ฝัง
  • เผยแพร่เมื่อ 30 ก.ค. 2024
  • Belt Weigh feeder | Application & operation | Hopper discharge vibratory chute | Part description |
    Please LIKE | SUBSCRIBE | SHARE our you-tube video for our motivation & please do not forget to hit the bell icon button for latest update.
    This video is only for education purpose.
    Mr. JK Singh (Whattapp +91-8106351454) has rich experience in cement plant project designing, operation & maintenance of equipment, etc.
    Email-ID for any Technical Guidance & support : cementpdm@gmail.com
    Please give your valuable comments & suggestion in comment box for continuous improvement.
    Belt weigh feeders are two types, those with a controlled belt speed and those with a metering hopper.
    Belt weigh-feeder with controlled belt speed:
    Belt weigh-feeders with controlled belt speed are belt-assisted feeders whose belt speed is adapted so it attains the nominal delivery rate.
    Since the same amount of material is not always transported on the conveyor belt, the belt speed must be varied to achieve a constant feed rate per unit of time. The weight of the material transported is determined by weighing the belt load and measuring the belt speed.
    Depending on design, belt weigh-feeders have delivery rates ranging from several kilograms to several hundred tons an hour.
    Belt weigh-feeder with metering hopper:
    Belt weigh-feeders with metering hoppers have a controlled feeder which adjusts the amount of material on the belt.
    These metering hoppers, which may be chutes, augers, radial vane rotors or conveyor belts, feed precisely the right amount of material to the conveyor belt.
    Belt weigh-feeders are suited to bulk materials which flow easily and don’t stick to the belt and can handle very large mass flows.
    #Beltweighfeeder #Weighfeeder #Apronweighfeeder #Rawmill #cementplant #

ความคิดเห็น • 33

  • @harish1.4.35
    @harish1.4.35 17 วันที่ผ่านมา

    Bahut akashi jankari di hai aap ne❤

  • @dhalendraratre8421
    @dhalendraratre8421 2 ปีที่แล้ว +2

    Very information

  • @tariq729me1
    @tariq729me1 ปีที่แล้ว +1

    Great 👍 ❤

  • @divakarsvmr1786
    @divakarsvmr1786 2 ปีที่แล้ว

    Very excellent information nicely presented.

  • @krupashankersingh3055
    @krupashankersingh3055 4 ปีที่แล้ว

    Very informative .... keep it up .

  • @devanshksharma
    @devanshksharma 4 ปีที่แล้ว +2

    Good video...
    Sir kindly upload more such videos related to cyclones,bag filters,N2/CO2 inertization and rotary air locks/rotary feeders.

    • @cementpdm
      @cementpdm  3 ปีที่แล้ว

      Sure Devansh Ji..

  • @narendrapradhan5541
    @narendrapradhan5541 2 ปีที่แล้ว

    Good job sir,

  • @shankarsinch6145
    @shankarsinch6145 3 ปีที่แล้ว

    Very nice sir

  • @arvindgolhani1650
    @arvindgolhani1650 3 ปีที่แล้ว

    Thank's sir

  • @36crown17
    @36crown17 3 หลายเดือนก่อน

    Iron ke 2 bunker hai jisme ek me iron chal rha hai ek me pallet chal rha hai toh usko kase set kare with factor bataiye sir

  • @babadubeytrpchannel5154
    @babadubeytrpchannel5154 4 ปีที่แล้ว +1

    Good job

    • @cementpdm
      @cementpdm  4 ปีที่แล้ว +1

      Thanks Mitra, I wish to God for your great success.

  • @anilkumarbarai4325
    @anilkumarbarai4325 4 ปีที่แล้ว +2

    nice video sir. Pfister rotor weighfeeder pe video banayiyee..

    • @cementpdm
      @cementpdm  4 ปีที่แล้ว +1

      Sure Anil Ji, After Lockdown.

    • @madhavdasgupta8861
      @madhavdasgupta8861 3 ปีที่แล้ว

      www.stesalittea.com/mgwf_03.php you can contact +919674758603

  • @Harmendrasingh28
    @Harmendrasingh28 ปีที่แล้ว

    Sir can you please specify which type of load cell is used in weigh feeder? Thanks

  • @shayandutta3
    @shayandutta3 3 ปีที่แล้ว

    Sir please weighfeeder k droptest k bare me video banaiye
    Pura concept samjhna hain

  • @dechanel9851
    @dechanel9851 ปีที่แล้ว

    Good video sir, this calibration is for a flat belt, what if the belt has an angle of inclination of 45 degrees ?

  • @SK_Govinda
    @SK_Govinda 3 ปีที่แล้ว

    Kindly upload videos for ccr operation

  • @lyricalworld9390
    @lyricalworld9390 2 ปีที่แล้ว

    Why apron feeder is needed for high moisture content material coneying...???

  • @dhilipkumar5492
    @dhilipkumar5492 3 ปีที่แล้ว

    Weigh feeder used to Rock material feeding is properly going but, crushed out is more . how to reduce crush out using by rock.

  • @shankarsinch6145
    @shankarsinch6145 3 ปีที่แล้ว

    Sir ji weight feeder me keya keya problem or isko kese thik kare or iska kese celebration kare vo bhi batai e sir ji

  • @36crown17
    @36crown17 3 หลายเดือนก่อน

    Drop test plc me set karne ka factor bataiye sir

  • @abd1737
    @abd1737 3 ปีที่แล้ว +1

    Sir, i need details of vibratory type Hopper.
    I have lots of problems of coal jamming..

    • @cementpdm
      @cementpdm  3 ปีที่แล้ว +1

      Contact me at Whatapp 81061454

  • @himachali3959
    @himachali3959 3 ปีที่แล้ว

    Tie road not shown. Where is it situated?

  • @manojkhilar4540
    @manojkhilar4540 3 ปีที่แล้ว +2

    flsmidth gdc calibration please

  • @manishkumarthakur1262
    @manishkumarthakur1262 2 ปีที่แล้ว

    Why load cell is necessary?

  • @AllR.K.P.M
    @AllR.K.P.M ปีที่แล้ว

    Sir ye apron feedar hai kya ye

  • @HardikBharga
    @HardikBharga 2 ปีที่แล้ว

    Members ship kese free hogi

  • @georgiampusa3890
    @georgiampusa3890 2 ปีที่แล้ว

    May you kindly make the videos in English

  • @gosaitseseaseole3417
    @gosaitseseaseole3417 ปีที่แล้ว

    I will never understand why someone would upload a video in another language and post the description in English. This is click baiting