wonder how you didnt get pulled over lol....I can barely make it out of my driveway without a cop looking at me...how fast you think you got up to without a govenor?
no clue, I drove around a whole season no problem and even took it 26 mile round trip just to see if I could lol. Somehow never got stopped. 44mph was the fastest it ever got on a flat surface.
@@stevehorton3900 I don't recall the sprocket size but the clutch was just a standard centrifugal clutch. The carb was a rejet kit I got from gopowersports.
@@coledesautel354 also depends on tire size, weight of the machine, weight of the rider and any upgrades that may or may not have been done to the engine.
@@coldfrontrecords101 RUN SYNTHETIC OIL" IN THERE" ITS HELPS ADD 3 OZ OF LUCAS OIL STABILITY TO A QUART OF OIL" MIX IT AND PUT WHATS NEEDED IN YOUR MOTOR"
@@coldfrontrecords101 bypass the oil sensor. when oil sloshes around in an engine because its attached to a bumpy bouncy gokart frame, the sensor does not get enough oil and causes a shut down that usually lasts about 3-5 seconds.
A. You shouldn't remove the governor on a likely vintage briggs without a billet flywheel at minimum. B. Removing the governor safely and correctly will keep your RPM from being limited, gets you from 3400ish rpm up to around 4500ish before your valves float. C. If you bypass instead of removing a governor, or dont upgrade your flywheel it could quickly result in catastrophic failure, flywheel can grenade and send shrapnel into you.
I had a motorcycle battery that I would recharge with a wall charger. Wired a switch to turn it on and off to the control panel to the right of me. Got the lightbar on Amazon with mounting hardware for $20
Bro that thing freaking RIPS !!!
*today I'm straight piping my 2 go karts. They are Rotax Fr125 max 2 stroke. And one is 4 stroke👌👌🤣*
sweet ride man!, sounds so good, FREEDOM!!, God bless :)
thanks dude!
Im getting a 212 put on mine tommorow. They seem to be really good engines.
they're pretty solid. and you can really crank them up with mods.
You should get a stage 2 or stage 3 kit.
Good video
2 years later from me nice old video lol
legendary
does it have a live axle?
Where did you get your frame I can’t seem to find one anywhere
its an older go kart frame. Got a good deal on facebook market place.
where did youw buy your kart from
???
I have the same cart question why does minds vibrate as I accelerate
wonder how you didnt get pulled over lol....I can barely make it out of my driveway without a cop looking at me...how fast you think you got up to without a govenor?
no clue, I drove around a whole season no problem and even took it 26 mile round trip just to see if I could lol. Somehow never got stopped. 44mph was the fastest it ever got on a flat surface.
@@coldfrontrecords101 what clutch and how many teeth
And what type of carb
@@stevehorton3900 I don't recall the sprocket size but the clutch was just a standard centrifugal clutch. The carb was a rejet kit I got from gopowersports.
Tylernol I have the same go kart
i have the same pipe as you, but i put a tarp over the engine while the pipe was still hot so it burned onto the pipe which makes it look ugly
what gear ratio do you have on that kart? Trying to figure out how fast my mini bike will go with a 45 tooth rear chain ring.
speedy mountain it depends on the size of ur clutch also
@@coledesautel354 also depends on tire size, weight of the machine, weight of the rider and any upgrades that may or may not have been done to the engine.
I don't recall what size sprockets I had on it. I sold it awhile back.
@@coldfrontrecords101 go get it back quick
Run 10 T clutch With 60 T spocket U Get 6:1 Ratio
what’s all done to it
Awww I never got to see you eat the burger 😮😢
What predator motor did u use and what ⚙️ u running
read the title and you can figure it out
What's your top speed and does it ever over heat? This video is the definition of freedom. 🎉👍👍
44mph was the fastest but it doesn't like holding full throttle like that lol seemed to not mind 40 though.
@@coldfrontrecords101 RUN SYNTHETIC OIL" IN THERE" ITS HELPS ADD 3 OZ OF LUCAS OIL STABILITY TO A QUART OF OIL" MIX IT AND PUT WHATS NEEDED IN YOUR MOTOR"
@@RGIIIBOXING for what is it better
@@coldfrontrecords101 bypass the oil sensor. when oil sloshes around in an engine because its attached to a bumpy bouncy gokart frame, the sensor does not get enough oil and causes a shut down that usually lasts about 3-5 seconds.
@@acekaterman9179 agree. Our drift trike would cut off every time we threw it into a slide. Disconnected oil sense and all good
how did you find the steering system for a kart that is not a center console
he didnt find a steering system he just got a frame and put the engine on it
When you want burger king but you don't have a car.... loll
What kind of lights you have in yhe front bumper?
It was just a 12v light bar i got on amazon for under $20.
Step 1: Always let your go kart warm up
i wish i had one
What all is done to it?
Governor removed, carb mod, aftermarket air filter, straight pipe from ebay.
@@coldfrontrecords101Stock springs?
What is the autonomy with the original engine tank?
Please pull around ...pop ,pop , pop ,pop
How do you take the gov off a 5 house Briggs and what would it do
A. You shouldn't remove the governor on a likely vintage briggs without a billet flywheel at minimum.
B. Removing the governor safely and correctly will keep your RPM from being limited, gets you from 3400ish rpm up to around 4500ish before your valves float.
C. If you bypass instead of removing a governor, or dont upgrade your flywheel it could quickly result in catastrophic failure, flywheel can grenade and send shrapnel into you.
taking off the governer makes it faster
Did you gat #15 Burger King foot lettuce
hell yea haha
No he got #1
how did you hook up your lightbar?
I had a motorcycle battery that I would recharge with a wall charger. Wired a switch to turn it on and off to the control panel to the right of me. Got the lightbar on Amazon with mounting hardware for $20
@@coldfrontrecords101 ahh ok thats the same way I was going to do it
that wood be so many charges if the cops stop you
Deil Navid not if they find you.
probably lol
Does the valves float at this high rpm? And the flywheel doesnt explode?
Flywheels don't explode. The magnets on them can become unglued.
Yes. The valves float. I put 22-pound springs in mine so they float at 8-9 thousand RPMs but I usually keep it below 6 thousand RPMs.
Thanks
@@Potato37184 I subscribed.
@@fish_R_stinky69 me?
The cops dont give you a hard time?
Where do I buy this! Or is it custom
custom
@@coldfrontrecords101 any tips for making one
buy a used cart, get a predator 212 and mod it out.
@@coldfrontrecords101 alright
Lucky you didn't get pulled over
That was a close call. Maybe add a mirror so you know whenever an asshole may be approaching.
Is it 1wd cause mine is
Nope, you can see the live axle briefly in the beginning of the video, and it pulls WAY to well to be a dead axle.
I think he welded the dif for awd,adds at least 5 horse power
@@billgates23yearsago4 don’t think that’s how it works
i got pulled over on the street lol
Can you leave a link to all the engine upgrades you brought
I got my kit from gopowersports. stage 1 performance kit from what I remember.
5$ just for a burger smh
Hey now, that pipe has a curve in it😑
It means no muffler.
Being that this totally isn't legal to do... still the person trying to run you over while passing you in the middle lane seems like the asshole here.
The law is a sometimes not the way to determine who is the asshole if I'm honest
@@greenbassboosts8872 it’s not tbh
Long tubes sound better then that crud
I agree, i just did it for fun lol
You should do a stage 2 or stage 3.