You need to be testing these at longer ranges. 25, 50, 75, and 100 yards. Then you start getting a better idea of the difference in accuracy. 10 yards is waaaay too close for an accuracy test. Also, might be interested in investing in a Ransom Rest. It's around $550 for the rest. But it will allow you to actially test real gun accuracy by removing all human variables.
The Smiths at CGW say the upgrade is only effective past 15 YRDS….and the upgrade is far more durable then stock which starts to warp past 10k rounds if ur shooting at targets 25-40 yrds it does make a noticeable difference.
it improves accuracy from old worn bushings. Its a replacement and likely the last one you'll ever replace. I like to see factory bushing vs the accu bushing.
One has to wonder. My box stock P-01 Tac is demonstrably more accurate than a custom 1911 I own. And the 1911 is freakishly accurate. The first 16 shots I fired with the P-01 had 14 shots into one ragged hole at 15 yards off hand!
Glad I found your video. I have an SP-01 coming and was going to get the CGW barrel bushing along with the MCarbo spring kit and guide rod. Now it’s just going to be the MCarbo products.
Isn't 10 yards a bit short of a distance to determine how much your accuracy was affected by the bushing? I wonder if the results would be different at 25 yards or so.
Perhaps, what distances do you normally shoot pistol at? Problem with going out to 25 is things like projectile consistency, human error etc are magnified. A worthwhile suggestion, I will try to find time to step it out to 25yds
@@nickneider3428 most of my handgun shooting is at 15-25 yards, but that's because of the rules at the outdoor range I shoot at. They won't let us shoot steel any closer than 15 yards. I think your 10 yard explanation makes sense. Taking the extra variables out should make for a more accurate experiment.
Your distance is far far too short to view any accuracy differences. Use 50 yards and simply do 4 or 5 shots. Do a warm up shot off target just in case the warmth of the barrel helps consistency
There is an holder made that holds the handgun very rigid. That seems to take out all user error. I believe InRangeTV had a video where they used it on a pistol. I don't know the name but it looked like it was pricey.
I dont think the higher end CZ's need it. My shadow 2 is stock and shoots stupid accurate... I have a 75b that I havent shot yet, but Im betting it'd probably benefit from the bushing.
I shoot 50m service match With the standard shadow 2, I can get most of my 5 shots group under 6 inches. If I am using my 1911, I can get a average 3 inch group. How much extra accuracy I can get from this bushing, can you do a long range video in the future? Thanks
Pistols are always going to be more accurate than the user. I love CZs and 1911s but adding a bushing to aCZ seems a bit gimmicky to me. But, what do I know, not much probably
Cajunize my 97B fully also my Tristar P120 fully - with the brushing i shot with 5 shots with both tools all 5 shots was put in a penny a dime a nickel a quarter a 50 cent piece a dollar bill coin from 7-10 yards from 20 yards i don't shot for grouping just accuracy one headshot both tools performed outstanding i shoot everyday from 380-9-40-10-45-5.7 so my skillset is unbelievable at times- My free-hand shooting destroy most people bench and dot shooting - When you get your tool/tools cajunize there is a difference of at least 25 percent at least thats been my experience with Cajun gun works tools that i have shot - Good video keep up the good work -
@@nickneider3428 makes no difference! Why would you do it? Do you think it looks cool or what is the reason? Don't do it on a buzy range! Don't do it on a empty range!
@@nickneider3428BS! Been shooting for 30 years! I am a trainer, both in safety and skills. Educated in firearms, ammo and explosives. Any further questions? The only one who "knows" your firearm is empty and safe is you, hopefully.
Love the side by side comparison. Thanks!
You need to be testing these at longer ranges. 25, 50, 75, and 100 yards. Then you start getting a better idea of the difference in accuracy. 10 yards is waaaay too close for an accuracy test.
Also, might be interested in investing in a Ransom Rest. It's around $550 for the rest. But it will allow you to actially test real gun accuracy by removing all human variables.
It could have a greater effect at more extended distances with better ammo, for my purposes it wasn’t worth it
@@nickneider3428yes uspsa doesn’t happen at 50-100 yards mostly all at 10-15 really so I agree defs not worth it.
The Smiths at CGW say the upgrade is only effective past 15 YRDS….and the upgrade is far more durable then stock which starts to warp past 10k rounds if ur shooting at targets 25-40 yrds it does make a noticeable difference.
it improves accuracy from old worn bushings. Its a replacement and likely the last one you'll ever replace. I like to see factory bushing vs the accu bushing.
One has to wonder. My box stock P-01 Tac is demonstrably more accurate than a custom 1911 I own. And the 1911 is freakishly accurate. The first 16 shots I fired with the P-01 had 14 shots into one ragged hole at 15 yards off hand!
Glad I found your video. I have an SP-01 coming and was going to get the CGW barrel bushing along with the MCarbo spring kit and guide rod. Now it’s just going to be the MCarbo products.
Thank your for the video.
Isn't 10 yards a bit short of a distance to determine how much your accuracy was affected by the bushing? I wonder if the results would be different at 25 yards or so.
Perhaps, what distances do you normally shoot pistol at? Problem with going out to 25 is things like projectile consistency, human error etc are magnified. A worthwhile suggestion, I will try to find time to step it out to 25yds
@@nickneider3428 most of my handgun shooting is at 15-25 yards, but that's because of the rules at the outdoor range I shoot at. They won't let us shoot steel any closer than 15 yards. I think your 10 yard explanation makes sense. Taking the extra variables out should make for a more accurate experiment.
Your distance is far far too short to view any accuracy differences. Use 50 yards and simply do 4 or 5 shots.
Do a warm up shot off target just in case the warmth of the barrel helps consistency
There is an holder made that holds the handgun very rigid. That seems to take out all user error. I believe InRangeTV had a video where they used it on a pistol. I don't know the name but it looked like it was pricey.
no it doesn't, because they tried to say my brand new CZC Target II needed a bushing and it makes a ragged hole.
I dont think the higher end CZ's need it. My shadow 2 is stock and shoots stupid accurate... I have a 75b that I havent shot yet, but Im betting it'd probably benefit from the bushing.
I shoot 50m service match
With the standard shadow 2, I can get most of my 5 shots group under 6 inches.
If I am using my 1911, I can get a average 3 inch group.
How much extra accuracy I can get from this bushing, can you do a long range video in the future? Thanks
Very nice video 👍👍👍
Pistols are always going to be more accurate than the user. I love CZs and 1911s but adding a bushing to aCZ seems a bit gimmicky to me. But, what do I know, not much probably
It does make a difference. Not a huge one, but any little bit is better.
Cajunize my 97B fully also my Tristar P120 fully - with the brushing i shot with 5 shots with both tools all 5 shots was put in a penny a dime a nickel a quarter a 50 cent piece a dollar bill coin from 7-10 yards from 20 yards i don't shot for grouping just accuracy one headshot both tools performed outstanding i shoot everyday from 380-9-40-10-45-5.7 so my skillset is unbelievable at times- My free-hand shooting destroy most people bench and dot shooting - When you get your tool/tools cajunize there is a difference of at least 25 percent at least thats been my experience with Cajun gun works tools that i have shot - Good video keep up the good work -
what are you using to record, looks clean
GoPro 6
@@nickneider3428 thanks, been wanting to record my range time.
What was the Distance??
10yds
Why do you use 124 grain ? Any special reason?
It matches my carry ammo trajectory and works better on spinners
Happy i am not on the same range as you are waving those guns around with the hammer cocked! Do you do that when there's more pople around also?
That would be why they were unloaded firearms on an empty portion of the range 😉
@@nickneider3428 makes no difference! Why would you do it? Do you think it looks cool or what is the reason? Don't do it on a buzy range! Don't do it on a empty range!
@@tbear6812 unloaded firearms can be treated differently on a live range. Are you a range officer? Match director? Competitor? Anything?
@@nickneider3428BS! Been shooting for 30 years! I am a trainer, both in safety and skills. Educated in firearms, ammo and explosives. Any further questions?
The only one who "knows" your firearm is empty and safe is you, hopefully.
@@tmL6170 so you’ve never slung an unloaded rifle? Moved bay to bay with an unloaded firearm?
why is your gun farting? Reminds me of in Johnny English when the poo comes out his gun
👎