I wanna print like 30 of these and connect them together and use it as a blanket lol tht would be sick! Someone do it! I only have a voron 0 and would take me a year probably lol
@@VivaLaChance most definitely! I can only imagine you may have some issues with the print getting stuck to the fep film due to the high surface area, so some tilting/supports may be in order. And obviously you can't have the two-tone. FDM certainly is a lot cleaner. Main advantage resin may have over this is speed of print.
I wonder, if there is a geometry that can move like this, yet is 100% dense. Without the plates, just the backbone. Would make awesome flexible bodyarmor if made from steel or something. Assuming you could achieve wire-EDM-like tolerances.
hey really like your vids, I've been saving up for a p1p for a little while now and am finally getting close to getting one! is there any way you can show your setting I love hoe smooth your prints are
@@VivaLaChance yup I just realized that earlier and ordered it! and wow it is hard to believe you didn't really change anything your prints look amazing! keep up the good work!
@@1stHalf full price is still worth it for the printer. The AMS to me isn't worth it, but it others it is. I'd just get the printer and get the AMS later if you decide you want it.
I think this is what SpaceX might have to do to solve their tile falling off problem on Starship, make them interlock with each other as well as be fixed to the hull.
Any time I print anything this small it's stringies between everything EVERYWHERE how the hell can I avoid this? I lowered temp. Slowed the prints to well below the printers normal and lowered temp of extruder but still stringies
What are your retraction settings on this my printer would fail, not managed to dial it in for lots of small parts, also maybe any other useful settings like minimum print timebor whatever it is
Bro the p1p is a pre tuned press a button and go machine. People like me and you with cheap ended 3’s have to upgrade and dail it in ourselves through lots of research a stock ender 3 with a stock Cura profile will give you hell with any small parts or features and will almost always clog at some point. Those fancy core xy machines have been tuned very well out of the box hence why it’s 5 times the cost
Table/plate mat, workbench mat, pu on anything that you want to preserve whatever is underneath, make it out of a high heat filamnt like abs, asa, pc and use it as a mat that you can put hot pots and pans on or baking sheets.... I mean the list could go on and on. Either way tho not everything needs a "use case" ive printed crap just because i wanted to print something and i guarantee you have too lol
Cyberpunk 3D printed chainmail goes crazy
Its NASA you dumbas
A cosplay suit made of this and led backed behind it would have a badas effect like something from cyberpunk 2077.
It’s great that it can be printed but it doesn’t matter if it can’t be connected to other sheets of it
I wanna print like 30 of these and connect them together and use it as a blanket lol tht would be sick! Someone do it! I only have a voron 0 and would take me a year probably lol
that would be one scratchy blanket...
Im building a printer with a 380 × 380 + build volume and if you pay for the filament I'll print that
@@teitgenengineering inches or mom's?
@@jrc-fabs1634Moms for sure!
@@jrc-fabs1634that’s a lot of moms
Just as satisfying seeing the Shields on WipEout ships being activated 👌
I think there's more to this 3d printer than meets the eye.
Transformers…robots in disguise! 😆
Someone said it was designed by AI and I genuinely think that’s right
Print you fools!
@@THPOOKY finally! :-)
Looks like modern chainmail, cool af
What's the use of this? Why did you print it?
This would be great for resin, with how the model is designed.
Resin printers can do chainmail?
@@VivaLaChance most definitely! I can only imagine you may have some issues with the print getting stuck to the fep film due to the high surface area, so some tilting/supports may be in order. And obviously you can't have the two-tone. FDM certainly is a lot cleaner. Main advantage resin may have over this is speed of print.
@@VivaLaChance I make chainmeel with a resin printer
And pay $100/kg of plastic? Fuck that
I’m bout to make me a bulletproof suit out of PLA 😎 surely it should work!
I'm glad I wasn't the only one thinking this! 😂
It does say “NASA Fabric”..So Of Course it cannot do anything worthwhile!.(But it will make Impossible claims and expect you to believe them… ).
I'm gonna try PAHT K7. Stab vest? Crossbow bolts?🤔 A "SHTF vest"
I want to watch when you test it out 😂
just print at 220c dude you'll be good
Dude this is amazing. The world will learn so much with this new techniques
How? This has been around for years.
A tshirt of this would be amazing
bro what
Definitely a step up from your wood shirt!
Lmao
As soon as those are small solar panels, I am a bit impressed.
Voices in my head told me to research ed spider silk printing 😮
My new A1 is on the way. I cannot wait to try this one.
Tgis did not age well
hey there did you design this or is there somewhere I can download the scans?
im aout to print this and sew it clothing to use as armor for airsoft
That was actually a legit idea...
With the right color-s that could be a next level camouflage
Armor for airsoft lololol How tf you gonna call your shots if you can't feel them. Getting lit up is one of the exciting parts of airsoft
Wow😮😮😮😮 fantastico great job
Is there a file I could use to print my own?
Airsoft game changer
Just gotta figure how to make a vest out of it.
How? bbs would obliterate that PLA.
@@user-xj3mo2lx9z then just make it out of abs or petg lol. pla would already be a bad idea even without bbs cuz the heat would soften it
@kylec7870 use TPU and they would just bounce off
I wonder, if there is a geometry that can move like this, yet is 100% dense. Without the plates, just the backbone. Would make awesome flexible bodyarmor if made from steel or something. Assuming you could achieve wire-EDM-like tolerances.
Dragonskin ceramic armor is similar
Ok how are we connecting sheets of these please ?
That so cool😮
What type of material is the printer using
Gotta see this made like batman armor
I really dig this, looks great!
No way! I’m getting a bambulabs printer lol
hey really like your vids, I've been saving up for a p1p for a little while now and am finally getting close to getting one! is there any way you can show your setting I love hoe smooth your prints are
They are on sale right now…100 bucks off!
No setting changes…just .20 standard settings
@@VivaLaChance yup I just realized that earlier and ordered it! and wow it is hard to believe you didn't really change anything your prints look amazing! keep up the good work!
@@VivaLaChance would it be worth it to get the one with the multicolor for full price?
@@1stHalf full price is still worth it for the printer. The AMS to me isn't worth it, but it others it is. I'd just get the printer and get the AMS later if you decide you want it.
Can you join other sections?
Beautiful
I think this is what SpaceX might have to do to solve their tile falling off problem on Starship, make them interlock with each other as well as be fixed to the hull.
Okay, now what is the use case?
why can’t you see the layers on the product?
Just like Sons Of The Forest
Basically nomads suit from crysis
New armor for military
Very cool, but what do you even do with it? Lol
what filament is used for this?
Amazing
Где же взять такой referring 🤔
Cool
Is that the A1 printer?
Make it double sided
и зачем нужен этот материал? где его можно применять в быту?
I'm assuming my ender 3 stock will not make this right 😅
any decent 3d printer could make this
Can you tell me What are the materials used to make this thing?
Qué tipos de filamento es ??
I got a warning about there being to many triangles when I tried to slice it
Just slice it anyway, just warns it takes longer
@@VivaLaChance yeah it took so
Is the file on maker world? Would love to play with this
what 3d print u are using?
Make some armour out of it
どんなに高性能3Dプリンターがあっても!
肝心要のプログラミングが出来ないと宝の持ち腐れなんだよな
Hey, does anyone knows how to make a smother print, my filament prints are too rough
Do that in liquid metal
My ADHD would crumble it if I saw it😂😂
now make it smaller (nano tech)
the name of that printer is more like N-word in French 💀💀💀
bro im surprised how a bambu ps1 can print better than this
whats the name of the file? or where to get it. tnx
Nombre del STL please
Now, send the files to a company that prints metal parts.
imagine how much a hat made out of that would pinch your hair, I sure hope they would put NORMAL fabric underneath it.
Any time I print anything this small it's stringies between everything EVERYWHERE how the hell can I avoid this? I lowered temp. Slowed the prints to well below the printers normal and lowered temp of extruder but still stringies
Your filament is probably wet
Purpose of this stuff?
Any machine in india
Mousepad???
What does it do thi
Is it connectable to other prints??
yes
🐍🦎REJECT MODERNITY RETURN TO REPTILE🦎🐍
Why does this video keep showing up
what is this for a filament
amzn.to/48ZyqcZ
Nothing else?
What is this fabric used for?
Ok.
What are your retraction settings on this my printer would fail, not managed to dial it in for lots of small parts, also maybe any other useful settings like minimum print timebor whatever it is
Just standard .20 p1p settings, no changes , which I think is .8mm retraction length
@VivaLaChance p1p? I don't follow, what slicer are you using?.
@@A7Xdookie Bambu studio, printer is a bambu lab p1p
@@VivaLaChance ah OK I use Cura have you tried with that?
Bro the p1p is a pre tuned press a button and go machine.
People like me and you with cheap ended 3’s have to upgrade and dail it in ourselves through lots of research a stock ender 3 with a stock Cura profile will give you hell with any small parts or features and will almost always clog at some point.
Those fancy core xy machines have been tuned very well out of the box hence why it’s 5 times the cost
New firmware is out
Yeah, I saw a few people having first layer issues after so I’m gonna wait a while on this update.
how can print 2color like this video? p1p can use dual filament?
Filament used: amzn.to/3PaJKfE
But also yes, the p1p can use the ams, my other videos showcase it.
😮😮😮😮😮😮😮😮😮😮😮😮😮😮
Dragon scales
Skip the music dude.
Where’s the download?
Filament used: amzn.to/3PaJKfE
NASA Fabric Mk 3 Optimized for FDM Printing by TurboDork - Thingiverse www.thingiverse.com/thing:3095799
Are you using pla?
Yes just pla.
Filament used: amzn.to/3PaJKfE
es en pla pet g tpu o abs
😮yuo
What use case do this have?
Table/plate mat, workbench mat, pu on anything that you want to preserve whatever is underneath, make it out of a high heat filamnt like abs, asa, pc and use it as a mat that you can put hot pots and pans on or baking sheets.... I mean the list could go on and on. Either way tho not everything needs a "use case" ive printed crap just because i wanted to print something and i guarantee you have too lol
But what’s it for? 🤔
Exactly, seems more like tacti-cool and eye-candy without real world applications if you're not NASA.
How long does it take to print this?
This stuff took forever….like 8 hrs…the other chain Mail fabric I did was less than 4.
@@VivaLaChance 8 hours is still fast
I've printed about 6 of these sheets 😅 think on my settings they run around 6-7 hours
@@joebaker4481interesting, where did you get the print file from?
@@VivaLaChancequality like this. I was expecting you to say at least 24 hours.
The 3d model is open source?
Of course, designed by nasa but accessible to everyone
Only do it if you have a beefy computer
3d file please
Thingiverse www.thingiverse.com/thing:3095799
nah, just paint a carbon fiber with heat resistant black/aluminium paints from opposite sides, and you have a super heat resistant space blanket.
Things like this remind me why I don't need a 3d printer
link to the file ?
NASA Fabric Mk 3 Optimized for FDM Printing by TurboDork - Thingiverse www.thingiverse.com/thing:3095799
Bad music
The new chainmail? Lol
So a modern take on chainmail kek
this so is so annoying
but then u realize that u can do the same with 700€ instead of 3000
Can you add this armor to clothes?
If you’re able to design it in cad then definitely. It will take some time though.
Where can we find the STL files?
Thingiverse www.thingiverse.com/thing:3095799