Telecaster Guitar Building with Mahogany Body and Flame Maple Top Documentary PART 1 of 3.

แชร์
ฝัง
  • เผยแพร่เมื่อ 27 ส.ค. 2024
  • M I Tarr Guitars. PART 1 of 3, A Guitar Documentary of building a Telecaster style guitar.
    The documentary is a fly on the wall day to day working life of Music Tutor/Luthier and Photographer Michael Tarr. The Ex British Steel Electrical Engineer working from his home Workshop and Studio in South Wales, United Kingdom.
    No explanation or Narration is need, just watch and I hope you enjoy the film.
    I film my guitar making progress to give enjoyment to other's with an interest in guitars. And for my Children and Grandchildren.
    PLEASE NOTE.... There is more than one way to do any of the processes in building a guitar. Do what works for you and the tools/equipment you have to hand.
    Also Please Note. All Health and Safety equipment were in place and used when making this documentary. If removed it was only for filming purpose. Many Thanks Mike Tarr.

ความคิดเห็น • 302

  • @PowerTronMan
    @PowerTronMan 8 หลายเดือนก่อน +1

    Priceless with the baby looking at the blueprints!

    • @mitarrguitars
      @mitarrguitars  8 หลายเดือนก่อน

      Many thanks for your comment it’s very much appreciated. It’s all for them really. Best wishes Mike

  • @wkmetaal
    @wkmetaal ปีที่แล้ว +1

    Nice video and build. Just finished my Les Paul.
    Next year I start with a Telecaster build. I will visit this video's then over again for tips and tricks, thanks for it.

    • @mitarrguitars
      @mitarrguitars  ปีที่แล้ว

      Thanks for your comment, glad you enjoyed the build. Telecaster is a fabulous guitar to make, my favourite. Best wish Mike.

  • @dbgeneralservices
    @dbgeneralservices 3 ปีที่แล้ว +1

    At last, a no nonsense approach at sharing guitar building techniques that make sense. And you don't have to deal with someone that loves to hear the sound of their own voice.
    A good watch over morning coffee that is informative as well as inspiring.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Many thanks for your comment, it is very much appreciated. Glad you enjoyed the build, and the style it is filmed. I have just starting a new film. Best wishes for Wales..Mike

  • @christopherkuefler9839
    @christopherkuefler9839 3 ปีที่แล้ว +3

    That's awesome! Grandpa spending quality time with the grandson!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +2

      Hi Christopher. Yes it was, always a lot of fun. Thank you. Mike

  • @fongy200
    @fongy200 3 ปีที่แล้ว +1

    I do enjoy watching other folk build their Guitars and the different methods they employ. It's always good to be able to pick up new Bow strings for want of a better term. Thank you for sharing MIT G, no worries about me watching the other 2 parts. Good stuff, thanks.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi C Fong. Many thanks for your fabulous comment. I'm glad you you enjoyed the film. Best wish to you from a cold South Wales. Mike

  • @The-Light1
    @The-Light1 3 ปีที่แล้ว +1

    Mike knocks it out of the park again

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi THE LIGHT. Many thanks for your comment. Pleased you enjoyed the film..Mike

  • @massoud139
    @massoud139 3 ปีที่แล้ว +2

    I love it , that you let your grandson help you .

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Thanks for you comment Massoud.. Mike

  • @lottox8807
    @lottox8807 3 ปีที่แล้ว +1

    Congratulations you are a Master !! - From Italy

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Very kind of you. Thank you.Mike

  • @MusikTime-87
    @MusikTime-87 6 หลายเดือนก่อน +1

    Saya sudah ber ulang kali melihat video ini, sangat menyenangkan, begitu banyak detail yang anda ajarkan.. rasaynya saya adalah salah 1 dari ribuan penggemar anda yang ber mimpi memiliki gitar ini... Semoga sukses selalu tuan😮🔝🆗🎸‼️

    • @mitarrguitars
      @mitarrguitars  6 หลายเดือนก่อน

      Thank you so much for your comment, I’m pleased you enjoyed the guitar build. Mike

  • @JohnKorvell
    @JohnKorvell 3 ปีที่แล้ว +2

    I like how many times you measure and check and then measure again then check....... Old time quality craftsmanship!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Many thanks again John. Mike

    • @cptbeto
      @cptbeto 3 ปีที่แล้ว

      Measure twice, cut once. Age old tip (?

  • @leondantas
    @leondantas 3 ปีที่แล้ว +1

    great helping hand you had. So much joy to have them around.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Leonardo. Thank you for your comment. It is a great pleasure to have the opportunity to build things with Oliver, it is so much funny. Many thanks Mike

  • @tpledger100
    @tpledger100 3 ปีที่แล้ว +2

    You are a master craftsman I learned a lot watching this video. Thanks for sharing!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Georgia, pleased you enjoy the film and was able to pick up a few tips. Thanks for the comment..Stay safe Mike

  • @fredsalter1915
    @fredsalter1915 3 ปีที่แล้ว +1

    I love watching videos of people successfully doing things that I would completely fuck-up.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Fred. Glad you enjoyed the film. I make plenty of mistakes. Cheers Mike

  • @wadetomczyk8043
    @wadetomczyk8043 3 ปีที่แล้ว +8

    No talk, music just perfection. Enjoy your video builds.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Wade Tomczyk. Many thanks for you comment. Mike

  • @davidriel7805
    @davidriel7805 3 ปีที่แล้ว +1

    Truly inspired. I keep watching your videos over and over and I am amazed at your craftsmanship.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi David. Many thanks for your comment, pleased you enjoy the film. Just finishing a Les Paul style guitar, should be on TH-cam September. Best wishes. Mike Tarr

    • @davidriel7805
      @davidriel7805 3 ปีที่แล้ว

      @@mitarrguitars can’t wait !!!

  • @threadbear
    @threadbear 3 ปีที่แล้ว +4

    I watch lots of these guitar build and repair videos (I haven't been getting out much lately!). You, sir, are the guv'nor! Your videos are a real pleasure and education to watch.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello Thread Bear. Thank you sir for your wonderful comment. Im glad you enjoyed the films and pick up a few tips. thanks again. Stay safe..Mike

  • @slavkomakarovski1158
    @slavkomakarovski1158 3 ปีที่แล้ว +5

    That’s what I call the true blue trades man with fantastic skills and amazing craftsmanship 🙌🙌🙌👍👍👍👏👏👏👏

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hello Slavko. Many thanks for your fabulous comment. Mike

    • @jasonmitchell3242
      @jasonmitchell3242 3 ปีที่แล้ว

      @@mitarrguitars m

  • @jacksonalesna6313
    @jacksonalesna6313 3 ปีที่แล้ว +1

    This is one of the most relaxing build videos I have ever seen. 👌🏽

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Jackson. Thank you very much for that comment. Mike

  • @yrdbyrd_bjj
    @yrdbyrd_bjj 3 ปีที่แล้ว +3

    You have a beautiful family and amazing taste in automobiles.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Andrew, Thanks you kind sir...Mike

  • @joachimpeiper8076
    @joachimpeiper8076 3 ปีที่แล้ว +1

    A master craftsman for a “giant” electric guitar ever made

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Thank you Joachim. Best wishes from South Wales. Mike

  • @pluke63
    @pluke63 3 ปีที่แล้ว +1

    Guitar building amazing skills, cats, joyful little kids... you are my hero

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Pluke963. Many thanks, lovely comment. Stay safe.Mike

  • @mrfatbobrider1969
    @mrfatbobrider1969 2 ปีที่แล้ว +1

    Loving the build, also love the T-shirt ,i used to own a 1973 Norton 850 MK 2a Comando ...and now I'm soon to start building telecaster style guitars...
    Watching from here in New Zealand 👌

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว +1

      Many thanks for your comment, pleased you enjoyed the build. I do like my biker T-shirts, had my first bike in 1973. All the best with your Tele builds. They are my favourite guitar to make. Best wishes, Mike in South Wales 🏴󠁧󠁢󠁷󠁬󠁳󠁿

    • @mrfatbobrider1969
      @mrfatbobrider1969 2 ปีที่แล้ว +1

      @@mitarrguitars my favorite too,keep em coming, now its time for me to subscribe to your channel 😎

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว

      Thank you. 👌

  • @pjfuscoonthenews1693
    @pjfuscoonthenews1693 3 ปีที่แล้ว +5

    It's a great video, but the best part was you and your grandson. I have one that same age and being together, Grampa and grandson...well, there's nothing quite like it in the world except Grampa and his granddaughter. The best to my friend, like Rush said, you have "Talent on loan from God."

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi PJ Fusco. Glad you enjoyed the film. Mike

  • @majortwang6211
    @majortwang6211 3 ปีที่แล้ว +1

    Well done Mike !

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Major Twang. Thank you for your comment, glad you enjoy the film. Mike

  • @p.s8950
    @p.s8950 3 ปีที่แล้ว +5

    I've watched this video 5 times, I'll never be able to do this kinda job but watching you work is like relaxing meditation for me. I so wish I had your patients and skill. And the lack of heavy metal background music and/or attempts at stand up comedy is really nice. lol. Thanks.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +2

      Hi P.S This comment means a lot to me. The fact that you fully understand in your comment statement what i was try to achieve. Just myself and Oliver, some wood and tools. Many Thanks P.S Stay safe ...Mike

  • @aevoguitars2576
    @aevoguitars2576 3 ปีที่แล้ว +1

    Always good to have an apprentice

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Aeve thanks your comment. Mike

  • @anthonya9472
    @anthonya9472 3 ปีที่แล้ว +1

    Your shop is so clean!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Anthony. Thanks for you comment, a clean work shop is a safe one. Stay safe Mike

  • @Dammerl
    @Dammerl 3 ปีที่แล้ว +1

    Such videos are very rare. The working technique and the accuracy are already very, very good.
    I've never seen such precision and such a way of working, WOW.
    It's a pleasure to see these videos.
    Greetings from Germany Tom.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello Tom. I cant thank you enough for that wonderful comment, Many thanks Sir. And i am pleased you enjoyed the films. Best wishes from a very wet South Wales today.. Mike

  • @nathantank8974
    @nathantank8974 3 ปีที่แล้ว +2

    Great video! Thank you for sharing.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Nathan. Glad you enjoyed the film..Stay safe.....Mike

  • @NeoGeoEch13
    @NeoGeoEch13 3 ปีที่แล้ว +1

    Excellent video, thanks for sharing with everyone.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      NeoGeoEch . Many thanks for your Comment. Mike

  • @johnklein4558
    @johnklein4558 3 ปีที่แล้ว +1

    You do great work Mike. I wish you weren’t so far away from me. (Eastport, NY. USA)

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi John. Thank you for your comment. NY is one of my favourite places. We were due to travel there last May for our 40th wedding anniversary, but covid stop that, we are still lockdown. I can imagine Eastport is a beautiful hamlet state. Glad you enjoyed the film. Many thanks.Mike

  • @SuperMarge123
    @SuperMarge123 3 ปีที่แล้ว +2

    Total respect. Fantastic skills , a humble true family man who happens to be a genius. Outstanding viewing, thank you. I see by your tee shirts you share my passion for classic motorcycles too? I also was a friend of Tony Wilson , your X band mate. Gratitude. Quality. Respect. Regards Gareth Wiltshire UK.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Gareth. Thank you for your kind comments. Tony was a full of fun life character and fabulous drum. Yes I am a big fab of old bikes. Im hoping to restore one into a cafe racer or vintage scrambler one of these days. Did you work in the Steel works at one time. ?? cheers Mike

    • @SuperMarge123
      @SuperMarge123 3 ปีที่แล้ว

      @@mitarrguitars hello Mike , thanks for the reply. I didn't work in the works, I met Tony through Steve Roberts . I was in school with Steve and later found out Tony was in the same school and had left when I was in 2nd year. When your band finished I went into a band with Tony , SA aka Steve and Steve Roberts who's nickname in school was Dobsey. Then that didn't fly so Tony and I ended up in a 60's cover band . I have some bikes a 09 Bonnie, 68 CB 250 Honda , a 67CD 175 , 67 150 twin. Plus 4 monkey bikes. I have followed you on the net and honesty totals in awe of your phenominal skills. I have a 330 Rickenbacker, a Takamine 98 anniversary and a Martin HD28 plus a Tele copy.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Gareth, I realised now who your are. Tony has spoken about you many times and Dawn sends her regards.
      I've not seen Steve Roberts since Covid19, he is a true Gentleman and good friend. Steve SA I see a lot of, we very close, he's been through a tuff year. When things get back to normal you are more then welcome to call in and see my guitar builds and have a chat. Be good to meet you. Best wishes Mike.

    • @SuperMarge123
      @SuperMarge123 3 ปีที่แล้ว +1

      @@mitarrguitars hello Mike, thanks for your reply. I'm sad that I have not seen Dawn,Jaime or Paul. Mike Poole told.me of his passing and it blew me away even now seems unreal. Yes Steve Roberts is a gentleman , please give SA my regards, tell him to sing, he's good at it and it helps others. Thank you Mike look forward to seeing one day. Gratitude. You Sir are a gentleman. Regards Gareth Wiltshire UK. Respect.

  • @sithbk0075
    @sithbk0075 ปีที่แล้ว +1

    This just popped up on my feed. What an amazing skills to have. I’m putting together my first telecaster but I’m just going to assembling it. Sources all the parts from Fender. This video will help me get through the build easier than doing blindly. Thank you and aloha from Hawaii. You have earned a subscriber.

    • @mitarrguitars
      @mitarrguitars  ปีที่แล้ว +1

      Thank you so much for you comment and subscribing, we really do appreciate it. All the best with your build and I know you will enjoy the experience. You are the first comment I’ve had from Alpha, I must visit one of these days. Any help just ask. Thank you from Wales UK. Mike

  • @csnelling4
    @csnelling4 3 ปีที่แล้ว +1

    Great build 👏👏👏🇬🇧👍

  • @tommcclure3634
    @tommcclure3634 3 ปีที่แล้ว +1

    You know your woodcraft! Awesome vid.

  • @sam127001
    @sam127001 3 ปีที่แล้ว +1

    it's a pleasure to watch you work !

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Sam. Many thanks for your comment, glad you enjoyed the film. MIke

  • @paulolopes3726
    @paulolopes3726 3 ปีที่แล้ว +1

    Great job. 😁👍👏👏👏👏

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Thank you Paulo for you comment... Mike 👍

  • @the_enypniastes
    @the_enypniastes 3 ปีที่แล้ว

    Lovely video. My son and I just commented on how relaxing it has been watching it. He did have to tell me to shut up for repeatedly commenting on your watch collection too! Diolch for sharing this with us.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Steve.
      Many thanks to you and your son for the comment. Glad you enjoyed the film.
      I do have a bit of a think for watches. Quick story, I had my first Rolex In 1987. I was working in the steel industry 7 days on 2 off, then you start again, which was for the norm in South Wales Steel and Coal industry. And on my days off I worked for someone else, did this for 4 month to be able to save for a submariner. It killed me with no days off, for the 16 weeks, and with a young family. My son has the watch now. We live in a throw away world, so it’s nice to wait for a something special for yourself and to hand down. It’s the same for my guitars. It’s for them and grandchildren. And that’s also the reason I do the films. Many thanks again. Stay safe...Mike.

  • @Ynherag
    @Ynherag 3 ปีที่แล้ว +1

    Amazing, as usual. Thanks a lot!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Ynherag, thanks for your comment. Mike

  • @boogierandy7547
    @boogierandy7547 3 ปีที่แล้ว +1

    Great craftsmanship!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Cheers Randy, glad you enjoyed the film...Mike

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Randy. You are a fine player Sir. ..Mike

  • @tobaccorich
    @tobaccorich 3 ปีที่แล้ว +2

    Good skills my fine fellow. I plan to make myself a telecaster this year. I m sure nothing can go wrong 🤣🤣🤣🤣🤣🤣

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi StolenSon. Thank you for your comment and glad you enjoyed the film. Telecasters are my favourite build and not to difficult, just take your time. For me it is the finishing is the may or break part of the build. So many things can go wrong. Any help I can give just ask. Best Mike

    • @tobaccorich
      @tobaccorich 3 ปีที่แล้ว

      @@mitarrguitars Thanks. I ll do a body first. I will be using your videos as reference.

  • @henryanton2605
    @henryanton2605 3 ปีที่แล้ว +1

    I sincerely hope this is the best sounding guitar you've ever played...you deserve it!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Henry. Thank you for your comment, and glad you enjoyed the film. Im very pleased with the guitar, its a keeper. Mike

  • @rubenvaldiviaescalante8339
    @rubenvaldiviaescalante8339 3 ปีที่แล้ว +1

    Master sus maquinas y herramientas le.ayudan mucho ....y sus manos son magicas ..

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Ruben. Muchas gracias por tu comentario. Mike

  • @whittaboi
    @whittaboi 3 ปีที่แล้ว +4

    At first I thought you were gonna chuck that cat across the room, what a sweet video... oh and the Guitars looking great too x

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi James, For some reason only just seen your comment, many thanks.. Mike

  • @eddiehfsolutions
    @eddiehfsolutions 3 ปีที่แล้ว

    Amazing as usual, Mike. You're a wizard among luthers.
    Ed SV

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Many thanks Eddie. Glad you enjoyed the film. Mike

  • @nathansullivanmusic7574
    @nathansullivanmusic7574 3 ปีที่แล้ว +1

    Just discovered your channel and this is the the third straight video I’ve watched. I play guitar but I am about as unpractical a man as you could find but I’m always fascinated by the art of guitar building. Your videos are among the best I’ve seen. Thoroughly enjoyable and beautiful end product!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello Nathan
      Many thanks for your wonderful comment. I’m so pleased you enjoyed the films. They are pretty demanding to do, from the building, filming, playing and editing. It’s about 4 months work. I’m Hoping this winter to start doing shorter films explaining some of the jobs or tools a use. Just completing a new Les Paul build, which will be published on TH-cam about October which I’m sure you will enjoy. Many thanks Mike

  • @jean-mariecavelier3525
    @jean-mariecavelier3525 3 ปีที่แล้ว +1

    Very good job !

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Thank you Sir. Glad you enjoyed the film and guitar..Mike

  • @talbenami8396
    @talbenami8396 3 ปีที่แล้ว +1

    Good to see new content from you, always a pleasure :)

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Tal. Thank you for your comment. Mike

  • @fongy200
    @fongy200 ปีที่แล้ว +1

    So after watching your video journal a few times i decided to build myself another T style. I already had a beautiful Peavey Neck so i just needed the body. As I'm sure your aware, Musicians without work have to take up other work and my sad job was working in an Abattoir. It certainly gave me the Blues. Anyway the Boning line was being overhauled and all the thick Pine blocks were being sold off apart from those that were not sellable. So i took one and i made the body of my Tele from a Pine Butchers block. My guitars name is 'Blood' for obvious reasons. Thought i would check back and fill you in on my Guitar exploits. If you have an email address Mike i would like to send you a couple of pics. Thanks for the encouragement you unwittingly gave me over the past few years.

    • @mitarrguitars
      @mitarrguitars  ปีที่แล้ว

      Many thanks for that wonderful comment. I’m so pleased you have been have a go at making a Telecaster. It is my favourite guitar to make and will be filming another this year or next year. Any help I could be just ask, it’s not a problem. I will look forward to seeing your work. My email is
      mitarrguitars@postmaster.co.uk best wish Mike.

  • @gorgenhaggblad6727
    @gorgenhaggblad6727 3 ปีที่แล้ว +1

    Real craft.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Gorgen. Many thanks, pleased you enjoyed the film. From South Wales..Mike

  • @brandonlbartlett
    @brandonlbartlett 2 ปีที่แล้ว

    This is beautiful. I love the fact that no words (outside of grandkids) were needed. You took the time to really zoom in on the important stuff, but wasted no time doing it either. You got a like and a subscribe from me!

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว

      Hi Brandon. This comment mean a lot to me and answers and few questions that have been on my mind. A lot of views don't understand or like the no talking. So for this year guitar build film there is going to be some talking and explanation of want I am doing. I will not forget your comment and I would like to ask you to let me know which is the better concept, talking, No talking, or keep it totally silent. I thank you for the Like and Subscribe, it is very much appreciated. What part of the world are you from ?. Best wishes from a sunny South Wales. Mike

  • @redram5150
    @redram5150 3 ปีที่แล้ว +1

    I really like your shop floor

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Red Ram, Thanks for your comment. Clean workshop = Safe workshop. Hope you enjoy the film... Mike

  • @wearytraveler3524
    @wearytraveler3524 3 ปีที่แล้ว +1

    Nice team effort!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Weary Traveler...Many thanks for your comment. cheers Mike

  • @EastLondonKiwi
    @EastLondonKiwi 3 ปีที่แล้ว +3

    The little girl with the ruler. "Silly Grandad, use a CNC router and CAD software, look I'll show you how" ;-)

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi EastLondonKiwi. Rose has got me on this CAD software as we speak. It’s good to. Thanks for the comment. Hope you enjoyed the film. She going star in the next film more I would think. Stay safe. Cheers Mike

    • @EastLondonKiwi
      @EastLondonKiwi 3 ปีที่แล้ว +1

      @@mitarrguitars it's a lovely build fella. I bet it plays beautifully. Take care stay safe.

  • @charlesraymond3347
    @charlesraymond3347 3 ปีที่แล้ว +4

    This is so relaxing to watch

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Charles. Thank you that comment, you have summed up what try to put over. Pleased you enjoyed it. Many thanks, Stay safe.Mike

  • @russbeston1729
    @russbeston1729 3 ปีที่แล้ว +1

    Great.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Russ. Many thanks for your comment, glad you enjoyed the film. Best wishes Mike

  • @haytguugle8656
    @haytguugle8656 3 ปีที่แล้ว +1

    Absolutely agree with many of your choices and techniques. Specifically; mahogany body/thin maple top, cream binding on top/soft roundover on the back, electrosocket output jack, (looks like) pau ferro fingerboard, staggered brass saddles, comfort relief at the neck heel, etc. Oh, and most of all, NOT routing that ridiculous wire slot that forces you to cover half the beautiful body with a cheap, ugly piece of unnecessary plastic! (I try to keep as much plastic off the guitar as possible.) 100% on the money in my book.
    Where I differ from your choices (so far) is the double gluing and the belly relief on the back. I'm a third-generation carpenter/craftsman having experienced hundreds of other craftsmen. 'Almost' none apply glue to both sides of the work. If it is applied correctly to one side, that is plenty. Too much glue can actually create problems as it increases the chance for air bubbles and bulges where the excess glue couldn't escape when trying to squeeze it out. (End grain, okay, maybe there).
    Oh, and one other thing... I would never let a cat anywhere near my shop! (nor anything else for that matter) ;-)
    All told, much respect and appreciation for your craftsmanship and diligent attention to the small details. I enjoyed watching you work.
    Best to you and those grand-kids.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi haty guugle. Glad you enjoy the guitar build and I very much appreciate a detail comment like yours, thank you. Has for the glue on both side Im not trained in woodwork of any kind, I'm a Electrical Engineer by trade but have made guitars since i was an apprentice, but I will definitely give it a go. Has for the scratch plate, I made loads with and without. This guitar came about of the back of my Stratocaster I made last year, so there like a match pair in construction wise, and they look fabulous together. The finger board is Rosewood not Pau Ferro, its just light colour so i can see why you thought that. Once again thanks for you comment. Best wishes from Wales. Mike

    • @haytguugle8656
      @haytguugle8656 3 ปีที่แล้ว +1

      @@mitarrguitars
      As it (they) is a musical instrument, the total proof of success in in the playing and the tone. But from watching the vids, everything seems to be in place to expect it to be proud piece.
      Just an added aside; I also reverse the control plate and swap the pots. This puts the volume control closest to the fingers while playing and the selector switch clear to access behind the knobs. (I also have started using the stewmac "angled" control plate that angles the switch a bit for a more natural motion.
      Nice rosewood you used. So many dye those variations to make it a more uniform darker color. I like the look of yours.
      Again, proud work.

  • @GuteisFinger
    @GuteisFinger 3 ปีที่แล้ว +1

    Absolutely brilliant work Mike. And what's clearly apparent in the background is a creative life well lived. I have to say, watching you applying and trimming the binding was nerve wracking, as I tried to imagine myself doing it with my unsteady hands. What a neat job you made of it. I wanted to share something I learned from Texas Toast guitars that you might consider when working the fret and neck together. They put two pins in the neck at the same locations you do on the fret board, then nip the heads so that they're about 1/4" or so proud of the neck. They then the neck onto them to index it without making through holes. When done routing, they take off the fret board and pull out the pins. I may have missed some detail that makes this irrelevant to your work. If so, mae'n ddrwg gennyf. Your mileage may vary. Going to watch part 2 now. Keep up the great work.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Carl. Thanks for your great comments. I’m pretty sure I’ve see the Texas Toast Guitars video you mentioned. Always nice to see different ways of doing jobs. It goes with just about every task in guitar building. There are many ways to do each job. Hope you enjoy part two. Stay safe Carl. Best wishes from South Wales UK. Mike

  • @marianorodriguez9896
    @marianorodriguez9896 3 ปีที่แล้ว

    Greetings from Buenos Aires Argentina!!! 🙋🏻‍♂️

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Greetings Mariano from South Wales. Mike

  • @kubakasprzycki5779
    @kubakasprzycki5779 3 ปีที่แล้ว +1

    nice work, great! I've got small tip for You. If You use baking paper instead newspaper, glue won't stick to it :)

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Kuba. Thank you for your comment. I like your tip even before I try it, it sounds like a great idea. I’m sure I did it once before with cling film on my Les Paul junior documentary with the neck binding. But I’ll try your tip out on the film. Thanks again Stay safe..Mike

  • @user-dn7fl9xp8n
    @user-dn7fl9xp8n 3 ปีที่แล้ว +1

    Спасибо.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Спасибо за комментарий, рад, что вам понравился фильм. Майк

  • @timhallas4275
    @timhallas4275 2 ปีที่แล้ว

    I found a way to glue up tops without all those clamps. I have a perfectly flat table, a perfectly flat 2 in thick, 2 ft x 2 ft slab of abs on top of the work. I then pile on 300 pounds of iron barbell plates. That way I get a perfect squeeze, and a good workout.

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว

      Cheers Tim good idea. Hope you enjoy the film. MIke

  • @nehemiasdasilva8817
    @nehemiasdasilva8817 3 ปีที่แล้ว +1

    👏👏👏👏👏👏oficina chique 5 estrelas ,parabéns pelo profissionalismo, preciso de uma dessa😁👏👏👏👏👏👏🎸🙏

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Nehemias Muito obrigado pelo seu comentário. É muito apreciado. Mike

  • @aw9216
    @aw9216 3 ปีที่แล้ว +1

    Great great...genial.!!!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello A W. Thank you for your comment.. Mike

  • @CoenBijpost
    @CoenBijpost 3 ปีที่แล้ว +1

    What, would you say, are the essential power tools to get for building a standard telecaster guitar? I’m moving to a new place this summer, with a bigger garage and finally room to start building guitars. I’ve made a tele with an unfinished body and neck from warmoth, but now I want to do the real thing. Gonna start with a basic slab tele and work from there. Any tips greatly appreciated.
    Real great video to watch. You are probably the best grandpa in the world. Seeing those kids smile at you, melts my heart ❤️ And the cat. Anyone that has that kind of bond with a cat is a good man, in my book!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      H Coen. Thanks for the comment, hope you enjoyed the film and it will be of some help to you. As for the cats they are very important to me.
      Your question is hard, people many have different thoughts on essential tool. So for me its some thing like this.
      Band saw, not got to be big. Good blade and well set up.
      Router.
      Pillar drill.
      Cordless drill.
      Sanders, Orbital and Detail.
      lots of hand tools and some you can make yourself.
      Buy the best quality you can. it will last you. Hope this is of help. Best wishes.. Mike
      Cats

  • @reginaldorobson
    @reginaldorobson 3 ปีที่แล้ว +1

    Gostei do shape !!!
    Ficou muito parecido com a minha 😍👏👏👏👏👏👏👏👏👏👏

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Reginaldo. Que bom que gostou, obrigado pelo seu comentário..Mike

  • @patwelch8187
    @patwelch8187 3 ปีที่แล้ว +1

    Computer/machine made is 10 times better. Always perfect. But I guess this is fun if you have nothing else to do !!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Complete rubbish Butty, you make a comment with out watching it all, or you have never played a hand made instrument of any kind. As for having nothing better to, you can’t have any grandchildren I’m guessing. There is nothing better than having them in the workshop with me, helping out. A very Condescending comment, what a cheek, rude and disrespectful. Your Welsh by name not by nationality. Mike from South Wales

  • @nicholasbennett2358
    @nicholasbennett2358 3 ปีที่แล้ว +1

    Im so glad you do I want one but the wife says no way , I will wear no shirt that says that I do until I do

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Nicholas. I’ve had a bike since I was 16, 1st June 1973, the same day the helmet law came legal in the UK. Still wear a tee shirt if it is what you like. I wear VW tee but I don’t have one. More important hope you enjoyed the films. New build will be published in October. Best wishes from Wales. Mike

  • @hootowl6354
    @hootowl6354 3 ปีที่แล้ว +1

    Nice work. But if I were making my own I'd round the top off under the right forearm, like a Strat, and I'd move the controls out of the way (strictly a personal preference). I'd also lighten the body with chambers.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Hoot Owl, Thanks for the comment and I'm glad you enjoyed the film. It is good to hear what other views like in a guitar. Chamber the body is not for everyone, I've never done it. So I'm going to give it a try, on the next guitar film. Thanks again.. Mike

  • @ande047
    @ande047 5 หลายเดือนก่อน +1

    I love watching your videos, Michael! They’ve helped me increase my luthier knowledge immensely! I have a quick question. When you’re attaching the fretboard to the neck, what size tack/nail do you hammer in right in the fret slot? It’s the two nails that you use to keep the board from sliding when gluing. I just want to make sure I’m not using too large of a tack.
    Thank you!

    • @mitarrguitars
      @mitarrguitars  4 หลายเดือนก่อน +1

      Many thanks I’m pleased you enjoy the videos. The nail/ tack are very small about 1 to 1.25 mm in diameter. They can be the same size as the fret slot or thinner. But no bigger than the fret slot. It’s not to critical the fret covers the hole. Best wishes Mike

    • @ande047
      @ande047 4 หลายเดือนก่อน

      @@mitarrguitars Thank you!

  • @pavure
    @pavure 3 ปีที่แล้ว +3

    15:20 Unexpected billion dollar smile 😃

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Blues Rules. Yes it was a lovely smile. Rose will be starring more in the next guitar film. Best wishes from Wales..Mike

  • @buster612003
    @buster612003 3 ปีที่แล้ว +1

    LOL, just like a cat...."stop what you are doing and pay attention to me". Great video!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Ed C. Thanks for you comment, your right about the cat. And pleased you enjoy the film. Mike

  • @sunarsocakso6258
    @sunarsocakso6258 3 ปีที่แล้ว +1

    Sip hebat bos

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Terima kasih, senang Anda menyukainya. Mike

  • @DavidSmith-ss1cg
    @DavidSmith-ss1cg ปีที่แล้ว +1

    Did you pre-select the wood pieces by video-conference before ordering? That's some GORGEOUS wood(especially the slab fingerboard)! As usual, great work.

    • @mitarrguitars
      @mitarrguitars  ปีที่แล้ว

      Hi David. No David, wood selection I leave to the supplier. Which is Touchstone Tonewoods in the UK. I always phone to talk to the same sales person, discuss what I’m looking for. On that guitar the flame maple neck is some thing special. That came from the same piece of maple I used on the Mahogany body Stratocaster build the year before. Thanks for the comment it is very much appreciated. Mike

  • @willb3698
    @willb3698 3 ปีที่แล้ว +1

    Firstly, Will watch because of T-Shirt, still many old Brit bikes here in Australia...machinists make the spares.
    Secondly, I just bought a similar 6 inch Jointer - so interested! EDIT - YES! I use Acid Brushes too.
    Was the Jointer ENOUGH? or did you have to use a shooting board too? have the same Sander too. Bloody hell - are you my other Brother?

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Bro. Can’t bet the old bikes. Shooting board on the the maple cap and large sanding block on the body blank. You will see it in the film Part 1 or part 2. Many thanks for your comment hope you enjoyed the build, Best wishes from South Wales. Mike

  • @marcaskew4835
    @marcaskew4835 3 ปีที่แล้ว +2

    Where do you get your wood and plans from, awesome video's really enjoy watching them, very informative without all the waffling on. Thanks.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Marc. Thank you for your comment, glad you enjoyed the films. I get all my wood and plans from Tounchstone Tonewoods in the UK. Mike

  • @johnrodriguez3929
    @johnrodriguez3929 3 ปีที่แล้ว +1

    shouldbe teaching this

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi John. Thanks for your comment. I have done many times within my local community, mostly for young people. It is always very enjoyable, I only teach music now. many thanks... Mike

  • @joshbarnett8941
    @joshbarnett8941 2 ปีที่แล้ว +1

    Hi Mike. Congratulations on the videos, they are outstanding. I'm not new to woodworking, however, I am new to guitar building, and your videos have been invaluable. I am about to embark on a telecaster build not too dissimilar to yours. Could I ask I what size edge banding you used on this build?
    Regards, Josh
    Victoria, Australia.

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว

      Hi Josh. Many thanks for your comment it is very much appreciated. So pleased you enjoyed my films and got something from them. Binding is 6mmx2mm. Any help just ask, Best wishes from Wales Mike.

  • @cuongtran4166
    @cuongtran4166 3 ปีที่แล้ว +1

    Ông rất yêu quý cháu...

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Cuong Tran. Cam on ban..Thank you Mike

  • @urbanwestgolf6855
    @urbanwestgolf6855 3 ปีที่แล้ว +1

    まめだね🎸凄いね

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      映画を楽しんでくれてありがとう。マイク

  • @Crouchypants
    @Crouchypants 3 ปีที่แล้ว +1

    Hi. How do you get on with the portable planer? Ive got an Axminster lunchbox thicknesser and its brilliant, but I just dont have space for another big floorstanding machine, so whilst I can get by ok with bench planes and a thicknesser......it'd be nice to have a planer too. Thank you for posting the video.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Edward. The Planer/Joiner is a fabulous machine and takes up very room. I'm a bit of a fan of Axminster tools. Thanks for the comment. Stay safe Mike

  • @REPIZCO
    @REPIZCO 3 ปีที่แล้ว +1

    💎💎💎💎💎

  • @maibanez
    @maibanez 2 ปีที่แล้ว +1

    question what type of bits do you use to routing the body and the pickups cavity? dimension of them? and how many watts the router have?

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว +1

      Hi M.A. Routers are 450 and 600 watts. Straight bits top bearing are 12mm dia and 25/20/10mm in length. Bottom bearing bit is 12 x 25mm. Mike

  • @chrishorsley4788
    @chrishorsley4788 3 ปีที่แล้ว +1

    Precision work, lovely to watch. Did you learn the superglue/masking tape trick from Ben at Crimson, or did you teach him it? Lol.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Chris. Thanks for your comment, it is much appreciated. No Chris, funny thing I was shown that trick by a young lad that i was teaching around 2004. But it is not a trick that I'm a fan of and would never recommend it at all. I don't use it and would feel very uncomfortable doing it while routing someone expensive guitar, not so bad on a new build, but its not for me. Now all that said.... What I do is, Yes i do use making tape but not with super glue but with a strong industrial strength double sided tape. not so messy no danger to you or the work, it a much better Tip/Trick. When you put the two surface, ie guitar and template apply pressure with a G Clamp it strengthen tapes, it not going anywhere. At about 28.40 you can see the large roll double sided tape in the frame. Everyone does things different and that fine, but I am sure my way on this great much better, give it a go Chris. Also Chris you will see me doing it more clearly in my other videos look at the Stratocaster. Thanks for a great comment and i hope you enjoyed my films. Best wishes..Mike

  • @deanstephens6131
    @deanstephens6131 3 ปีที่แล้ว +1

    Another great build in progress Mike! Did you work at the Ebbw plant, or did you ever venture down to Llanwern?

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Dean. Thanks for you comment. I worked in the Ebb Vale plant, from Oct 1973 to June 2002 the closure, with the electric dept. Started my guitar business then in 2005. Mike

  • @plasma3211
    @plasma3211 3 ปีที่แล้ว +1

    I got a lot of questions! First off your work is meticulous, I'm impressed! Second are those clamps made from old caulking guns? Thirdly I noticed you use that palm sander for a lot.i see it is a Bosch, can you tell me the model #? I have been wanting to get one for my shop. Thanks.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Robert, thank you for your comment, glad you enjoyed the film.
      No the clamps are not made from caulking gun, they do look like it. They called by a few names.... Ratchet speed clamps, One handed speed clamps or quick grip speed clamps, I have had them for over 20 years. Very strong, use one handed, you will fine them on Ebay but are getting hard to find. Palm sander is a Makita BO5012 125mm disc. Thanks again from Sunny South Wales..Mike

  • @macdaddyblues1
    @macdaddyblues1 3 ปีที่แล้ว +1

    This is the guy I always hated in shop class. :>)

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Larry. Thanks for your comment. I’ll take it that you enjoyed the film. Best wishes from South Wales. Mike

    • @macdaddyblues1
      @macdaddyblues1 3 ปีที่แล้ว +1

      @@mitarrguitars Certainly did... great work, mesmerizing really... Also, new respect for the genius of Leo Fender!!!

  • @RogerPerkin
    @RogerPerkin 3 ปีที่แล้ว +1

    What are you using to stick the binding on with?

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello Roger. Its just acetone, it softens/melts the plastic the binding. Apply small amount of pressure, held with the Tape. It sets quick 30 minutes, remove tape Job done. Sometimes I use supper glue but can get messy. Thanks for your comment from a cold South Wales. Mike

    • @RogerPerkin
      @RogerPerkin 3 ปีที่แล้ว +1

      ​ @M I Tarr guitars Thanks Mike, that's very helpful, I will get some. I am building a Red Special and coming to the binding and was considering super glue, but looking into it now acetone seems to be the liquid of choice. Really enjoyed watching your fender build - great craftmanship. I am still struggling with guitar #1!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      @@RogerPerkin Hi Roger. Thank for you comment. If you get stuck need any help just ask, if i can i will. Best wishes Mike

  • @mannyoro
    @mannyoro 2 ปีที่แล้ว

    I am also an E.E. with ambitions to build a guitar. What kit did you buy? I see you got some wood with contents. This is fantastic!

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว

      Thank you Snap Roll for you comment, and I’m pleased you enjoyed the films. It’s not a kit all materials are sourced separately for each build. From UK luthier suppliers. I mainly use two Touchstone Tonewoods, and Allparts UK. Best wishes from Wales…. Mike

  • @rekrap1369
    @rekrap1369 ปีที่แล้ว +1

    Awesome! What truss rod length did you use?

    • @mitarrguitars
      @mitarrguitars  ปีที่แล้ว

      Many thanks for your comment, 410mm dual action. Best wishes Mike

  • @stevebeaudoin7234
    @stevebeaudoin7234 2 ปีที่แล้ว +1

    where do you get your measurements on the depth of the neck to the neck pocket of the body

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว

      Hi Steve. The blue print drawings are very good which states 18mm. But to be honest I make the neck first, which starts out at 20mm plus the Finger Bd thickness, which is a big factor. So the answer to your question is it’s about 18/19mm. The style of bridge can also play a part also, 18 to 19mm is the norm for me. Best wishes from Wales Mike

  • @gibs8412
    @gibs8412 2 ปีที่แล้ว +1

    the grandkid made the video

    • @mitarrguitars
      @mitarrguitars  2 ปีที่แล้ว +1

      Thanks Gib S. That is what all about. Mike

  • @nmssis
    @nmssis 3 ปีที่แล้ว +1

    Great build, thanks for sharing.
    Question: What is the implication of placing the adjustment nut of the truss rod at the heel vs the headstock?
    I've heard that one keeps neck more straight than the other...is that true?

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Nessus, I’ve never heard of that, they both work and do there job in either direction. From a guitar building point of view, it is easier to install with the adjustment at the body, it’s a straight forward rout and not having to drill through to the head stock.
      Remember the truss is not really to keep the neck straight but to place a relief in the neck which counter act the string tension and neck shape. Which then aids play ability of the instruments.
      Another point to keep in mind with the truss rod. Where the neck joints the body at say the 16/17 fret the truss has no or little effect at the body. If you have a look at my 52 Telecaster built film, the truss rod is installed at the headstock. And a mahogany collar had to be made around the adjusting nut.
      It is easier to make adjustments at the headstock than at the body. For my videos I just tried to show different ways of doing jobs. But for me it’s because it’s so much easier to do at the body and saves time. Many thanks for your comment. Happy New Year from Wales UK ...Mike

    • @nmssis
      @nmssis 3 ปีที่แล้ว

      @@mitarrguitars thanks for the response. it was great watching your work!

  • @user-ul6yc5ve6n
    @user-ul6yc5ve6n 3 ปีที่แล้ว +1

    Hello from Russia! Your work is impressive. Can you please tell me, is mahogany better than alder?

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello to Russia. Thank you for your comment. None is better than the other both make very good guitars bodies. Alder is cheaper and generally finished with a solid colour paint, used widely by Fender. Mahogany is more expensive and more pleasing in colour and grain. Which can be painted, stained, tinted lacquer or oiled. Weight wise Alder is lighter, and sound wise is different, Mahogany give little more sustain, but none better than the other, Its what you like. For me i like to tint and stain my guitars. Also when I making my own guitars, I like working with and the looks of Magohany ,Maple, Rosewood. Its just my choice and not that one wood is better than another. Thank for South Wales.. Mike

  • @stevenedwards4470
    @stevenedwards4470 3 ปีที่แล้ว +1

    That was really nice to watch. What did you do just before you glued together the top?...with that pen looking thing. Were you scoring it for better glue adhesion? I haven't seen that move before. I see your cat likes it ruff huh?

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Steve. Glad you enjoyed the film. Your correct, it just a centre pop for marking out holes to be drilled on metal, scoring the wood to give a stronger joint. The cats are always with me, and yes they like it ruff. Happy New Year to you and thanks for your comment Mike.

    • @SuperJupiter9
      @SuperJupiter9 3 ปีที่แล้ว +1

      @@mitarrguitars I have to jump in at this answer. Wood glue is not epoxy, scoring the surface or even sanding it wont make the joint any stronger, quite the opposite actually. It always been recommended to have 2 very smooth surface, like silky smooth for the wood glue to perform at its maximum strength. That being said, you are a very skilled meticulous craftsman, the result is absolutely fantastic and the video is a breeze to watch, good job!

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      @@SuperJupiter9 Hi Pierre. Thanks for your comment and I am pleased you enjoy the film it means a lot to me and Oliver. It is hard sometimes to explain fully what is going on in your head. But I do not full agree with your take on the surface having to be very smooth. but is that fine, many people look at thing differently. But strength starts way before the glue go's full hard. Keying the surface can helps a great deal, it can assisted the surface to grab to each other. In other words, it will reduce and helps in the surface from sliding about all over the place , they grab each other. Which will improves the overhaul joint and it makes life easier when you are lining up the book match body etc. Now having said that its just my take on it, I am not prefect so could be wrong. But in my mind as an engineer by trade it makes sense to me. I have contacted a leading adhesive manufacturer and the reply was very smooth does not make for a better joint. But my final thought on this is, which as been very interesting, do what work for yourself. What a cracking comment, i thank you. Best wishes form a very wet and cold South Wales.Take care.... Mike

    • @SuperJupiter9
      @SuperJupiter9 3 ปีที่แล้ว +1

      @@mitarrguitars 40 years in the trade as a cabinet maker as well as exchanging information with some glue manufacturer's technicians taught me a few things, and sanding gluing surfaces is not part of it.Only Titebond specialist once mentioned sanding with 200 or higher grit could be satisfying but less likely to end with a perfect invisible joint.But for sure, each his own. Take care and looking forward for your next videos.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      @@SuperJupiter9 Pierre. It as been good to talk to you, thank you. Hope your family our all good with COVID Postion we find ourselves in. We our still in a lockdown since before Christmas, difficult times. I'm start a new guitar build film in the next few week with luck, if i can get all the materials. Thanks again Best wishes.... Mike

  • @jimatt147
    @jimatt147 3 ปีที่แล้ว +1

    Hello Mike,
    First of all I hope you and your family are all well in these tough times!
    I came across your channel yesterday, I have retired and have decided to build guitars in my 8'x12' shed,
    I am a metalworker by trade and wood is a new and interesting material for me, would it be ok if I pick your brain from time to time as I progress, I know I can do this but the big question is....how well?
    My very best regards, Steve.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hello Steve. Yes Steve no problem if I can be of any help, 8x 12 shed is fine, and don’t build something to complex for your first go. A Telecaster type guitar would be a good start. It can be any shape but that Tele type construction is straight forward. And it my favourite to build. Anyways just let me know. Stay Safe....Mike

    • @jimatt147
      @jimatt147 3 ปีที่แล้ว

      @@mitarrguitars Thanks Mike, I’ve already started, I came by a nice piece of mahogany so I have cut 2 Neck blanks and am now letting them settle, I suppose you could call them PRS Juniors. Do you have a particular moisture content that you work to? I’m storing them at 35% in the dining room and my shed is around 50%
      Regards Steve

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Not really Steve. I only use tonewoods from a great supplier, at touchstone. One thing I do is never leave the guitar I’m working in the workshop over night. If we have damp weather, and we sure do in Wales, it would mess it up. Sometime when gluing etc. But most I put it in my studio. Look at my Les Paul junior build film, it will help you out. Neck joint is what I do for my PRS. Mike

  • @Unschuldslamm-Deluxe-Germany
    @Unschuldslamm-Deluxe-Germany 3 ปีที่แล้ว +1

    😎😎😎😎😎

  • @killemall1983
    @killemall1983 3 ปีที่แล้ว +1

    I cant believe you routed all that with the worlds smallest router

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Luis. Well i did Luis and I've used the same machine for 22 years, and the funny thing is its not a router, its a laminate cutter. But it does the job fabulous, and it has got great advantages up its sleeve. I seen a Luthier using one many years ago from a very well know British guitar builder. Once i tried it, I've not used anything else since. But I've just got myself a new router, a gift of my Wife, and it smaller again. Its not got the power as the big boys The trick is use good cutters and look after them. Did you like the film, my apprentice is coming along fabulous. Thanks for the comment.. Mike

    • @killemall1983
      @killemall1983 3 ปีที่แล้ว +1

      @@mitarrguitars a well done video and build. I personally would never use and undersized and underpowered trim router like that, but as long as it works for you.

  • @daveredfern8258
    @daveredfern8258 3 ปีที่แล้ว +1

    where did you acquire these body templates?, cheers, and great video.

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว

      Hi Dave, glad you enjoyed the film. I have had the templates from a number of different places. Ebay or you can try Fletcher Guitars they have excellent templates, and ship world wide. I also make my own off blue print drawing. But it’s takes time and not that cost effective really. Thanks for the comment. Mike

  • @tomcarroll3475
    @tomcarroll3475 3 ปีที่แล้ว +1

    Can you share the brand/model of electronic caliber you’re using? Thanks

    • @mitarrguitars
      @mitarrguitars  3 ปีที่แล้ว +1

      Hi Tom. Thanks for you comment. The digital 150mm/6inch Caliper/Venner are made by Parkside, good value for the money. Hope you enjoyed the build. Mike

    • @tomcarroll3475
      @tomcarroll3475 3 ปีที่แล้ว

      Thanks Mike. I really enjoyed the video. You are skilled craftsman!