2010 Dodge Challenger Crank No Start
ฝัง
- เผยแพร่เมื่อ 7 ก.พ. 2025
- Disclaimer:
Due to factors beyond the control of Oz Mechanics, I cannot guarantee against improper use or unauthorized modifications of this information. Oz Mechanics assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Oz Mechanics recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Oz Mechanics, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Oz Mechanics.
Thanks a billion😊! This same problem was solved but nothing was wet. I just scraped the prongs on the relay fuse and it started right up!
What a coincidence!! South Main Auto, Pine Hollow Auto Diagnostic and Oz videos today were all crank no start and were all fuel delivery issues 😂
Holy smokes lol 🤪
Very educational video! Great job in getting to the root cause of the problem. Awesome video!
Thanks for stopping by Peggy. This was for sure a kick in the goo nads
Awesome! My 2006 Magnum Crank No Start! Tries 🔥 Hopefully Similar Prob! Cool Vid!
I would check the fuel pump system. Now lets see if I was close... Nice work!
Thanks for stopping by
I cannot thank you enough. That was my exact problem!!
Had that problem while driving last week, i just removed the start/run relays, clean them and the motor started properly
Sometimes the short cut is the quickest.
Good one Oz.
This one was a kick in the goo nads not to always go off your memory. Service info is your best friend.
Thanks for sharing Oz! How do you smoke the trunk to find leaks? With mineral oil based smoke?
I was going to try to smoke it. But it would have made the trunk smell bad
I think you did a great job, keep it up!!!
Great learning video for us All . We have all went down the wrong path. It’s life 👊🏻👍🏻
Heck yea. I actually have another video coming out soon where I royally f up
@@OzMechanics those are the best because we can learn
Buen contenido
Saludos Oz
I have a question my dodge ram hami 2010 1500 the oil my with antifreeze it’s how is that happen
One thing I know about pro demand is that it sucks on 2018 and newer Chrysler jeeps ram it’s sucks for connector locations. Had to switch to all data
OEM software is the way to go. But they charge per usage
Some of the Chrysler fuel pumps have a rewire campaign. So if you ever replace the pumps check to ensure replacement pump has new wire connector
OZ, Good one brother cheze peze thanks for sharing.
Thanks for watching
Hey, where did you get that manual for that car. I have a 2013 Challenger and am having a helluva time finding wiring diagrams for it.
What scan tools do you use for diagnostics?
Houston flood cars suck…but they’ll be great customers! 😆
You can expect a lifetime of electrical issues.
The electrical ones are the best
The customer is always right?
So what was the final outcome?
@@baird5776mullet if I’m not mistaken I explained it in the end of the video
@@OzMechanics You're right, sorry
Gotta love water intrusion lol! Always makes for fun :)
Squirt starting fluid in the intake. If it starts it’s likely your problem.
Trust me that’s automotive 101. I went to look for brake cleaner but I don’t as out of it.
@@OzMechanics 🤣
I would start with a quick spray of starting fluid in the intake.
I normally have brake cleaner but I was out after a brake job. Only had electrical cleaner. Trust me I didn’t forget
3:31 spray some brake clean in the intake
At the moment I didn’t have any. I only had electrical cleaner but that’s not concentrated enough to start it
This really helped my issue
Parts Yard, it was 40 dollars when i checked after watching video. Let me know if i can help by sending it to you?
This guys driving a Tacoma guys!!!! This outta tell what to drive.
It's all good!I still would have the customers change the relay box.
I was looking into a second hand one where they cut the wire but I would have to solder each wire or put a butt connector. I just cleaned the heck out of it with a brush and electrical cleaner
That beer belly popped that button. 😂 . Get in the gym ! Good diag bro
Hey you don't need a ham or you need a hole saw drill some holes in the bottom of that trunk
$1,400 for something they made for $10-$20. And then they charge to check codes on 2018+ models. That's part of the reason why Dodge/Jeep is losing money. People should boycott that company, they suck.
Ivan would have went into live data firstly
You are a good mechanic..please don't do too much of drama ...other I will have to unsubscribe you
I got to the point if people need unsubscribe they should unsubscribe.
Being you asked what I thought here’s what I think Jesus is more than a cuss word
You have to be open to being wrong. As mere mortals, we cannot know it all. Put another way, it's all good, dude. Don't beat yourself up over it. You still figured it out once you got put in the right direction.
You didn’t look bad or like a dummy good video. I would rather have a true honest Diag versus a prescriptive one that someone goes back after they figure it out and pretend like they did it. The was nice easy and good
You don't need to over do
Wet computer in the trunk
bi direction the fuel pump
Question or statement?
@@OzMechanics you have the scanner hooked up use the bidirection control to turn the pump on and listen
lmao am at the point you got owned by the relay in the trunk
I got so dialed into the relay being in the front tipm I got side tracked. We all make mistakes and I wanted to show that in this video
You're hitting the wrong box Hit the other one hit the other one
Nah, not a fool! yep shoulda went to the diagram first but oh well, sh@t happens! But $1400 is ridiculous! Explains why vehicles cost so damn much!
For sure. I just always have a strategy when I diagnose. Asses the issue, check codes then wiring diagram. But yea that fuse box is crazy!!!
I think you should buy a needle and some thread and learn how to sew buttons back on!
Será que no es tullo o su vistes de peso 😂😂😂
Muscle car prices.
Sell him a bilge pump!
Love that $700 snap on gauge . Sucks it’s cracked 🫤
Dude when it first cracked I was as disappointed as when my button popped off lol 🤣
@@OzMechanics oh I think that was tear shedding time