That guy stick welded that sheet metal tank with no leaks! That's impressive. No TIG, No MIG, no shielding gas, no vice grips, no clamps, no gloves, wearing sandals. wow.
Des pauvres ouvriers travaillent comme des esclaves. Sans aucune protection pour quelque dollars 💵💵💵. Tandis que la patron gagne plein d’argent pour aller s’amuser 👯👯♀️👯♂️💋💋💋 au pays de liberté en Europe et Amérique
Me impresiona ver cómo se sientan, se ve que es parte de sus vidas sentarse así, otra cosa que me impresiona es que todas estas industrias son rudimentarias y trabajan en el suelo lleno de tierra, sea lo que sea que fabriquen el piso es de tierra, todo muy sucio y contaminado pero en sus ojos se ve que son muy trabajabadores y buenas personas.
Религия не причем дядь. Вон русские христиане до сих пор жигули штампуют на зарубежном оборудовании, а другие христиане в мерседесы делают. Так и есть развитые мусульманские страны, так и отсталые. Дело в в другом видимо...
@@TheFeFactor Еще раз говорю. Религия тут не причем. Если они действовали строго согласно религии, в данном случае Ислам, то там была бы идеальная чистота и порядок. Бывали времена, когда наукой правили мусульмане.
@@meirbekleker8637 так себе аргумент. Вы же наверняка помните, что во имя религии живьем сжигались ученые и чума распротанялась в церквях (целование креста например)
ماشاءاللہ۔ بہت زبردست ویڈیو تھی بہت اچھا لگا دل خوش ہو جاتا ہے جب محنتی لوگوں کو کام کرتے دیکھتا ہوں ۔ اللہ تعالٰی آپ سب کو اسی طرح خوش رکھے آمین۔🤲 "اپنے حوصلوں کی پرواز اونچی رکھو ایک دن مکان بھی بن جائیگا اور مقام بھی بن جائے گا۔"
I am constantly amazed by the skills of the fine people in these videos! But I can’t understand why you won’t use a table for standing up while working on projects? It would help your posture tremendously and speed up the work even more. Thank you for the amazing videos !
If you are accustomed to siting on your haunches it doesn't matter. The advantage of working on the floor is you are able to use all four limbs.. Japanese woodworkers too work on the floor.
I think you have to be a Slav or person from Asia... Grow up used to bending posture to understand this is quite natural. In the west its a completely different posture and your joints never get used to bending this way. l. When I was a boy it felt perfectly natural to squat, and I think if I kept it up and worked at my flexibility and mobility and I could still comfortably squat. But now I am old and my joints are bad because of injuries and I never forced them remain supple.....
@G R they have limted space so it is not feasible to put a big table occupying a lot of space. That's why you see videos of workmen in asian countries like india Pakistan wtc working while sitting.
I sure enjoy watching your fabrication work on these fuel tanks, lot of blacksmith work involved and that’s old school to me! That’s why I enjoy watching your guys do the preparation and fit ups on these tanks and they’re welding is amazing with no gloves or boots and just a pair of dark glasses! I’d love to know what type of welding rods y’all are using on these tanks, very inspiring to see! I also enjoy watching the laying out, shearing and bending process of the steel! Very educational and inspiring to see and I’m a 37 year on the job welding, fabrication of many tanks and vessels in a certified vessel shop , these guys are amazing at their job! Thanks for sharing and I always appreciate watching these jobs!👌🏻👌🏻🤙🏻🤙🏻🇺🇸
@@SteveShivik no you still get your face burnt by the welding glare, burns your skin worse than sunburn, I know how that feels being a fabricator for 30 years! It’s a rough job going home every day burnt up! These guys are amazing workers! I’m definitely can appreciate their hard work!
I've been welding since i was a kid,almost 60 years and I have macular degeneration.I have always used a helmet and gas welding goggles ,never ever even tried the squint method of eye protection. When you can no longer focus on the weld pool you are done. I'd say the tank builder is no more than his late 30's so it won't be long before he has cataracts ,which the US tax payer via the UN will rectify for him at no cost to himself. Pakistan is a nuclear power BTW>.
Of all the people coming across American borders we need to sponsor these people to come help make America great again and deport the unproductive people who just complain!
Although these people may not be well-educated, their skills really make them stand out. I am very impressed with the local talent but I also have a complaint from them that they do not show professionalism. For example, in the same video, you can see that a fuel tank was built with great skill, but the inside of the fuel tank was not cleaned and small pieces of metal that had fallen due to welding were not removed. Think for yourself how much damage this thing can do to the main engine.
Why do you assume they aren't well educated? Being a trade person makes you educated. Apparently you have also never heard of a fuel filter. Also let's not forget that the quality of diesel they are using is not up to western standards anyway so that bit of dirt doesn't really matter in the bigger picture.
Нафига?! Они и в заливной горловине дуршлаг делают,чтоб шлангом не слить))) С отстойника соляру легко можно спиздить. Хотя у нас в таком случае просто дыру в баке ломом или топором делают
What kind or type of welding rod are they using? Is it something like 7018 or 6010. I’ve been welding my entire life and I’ve never seen welding rod do that good on thin steel
Wonder why nearly everyone in these countries want to sit in the dirt and work on the ground? It's crazy they don't have work tables. And they never clean up the junk and trash etc. what's up with these people?
Hi to all the people commenting about no benches and working of the floor .. yes we have a different way here in the west .. we work upright and of benches etc .. it’s just the way these guys have been doing for centuries and works best for them , they can work and have to work any terrain ,, jungles outbacks or a ditch in the road .. you can’t change them that’s their work method .. lol I too have been corrupted by the west so when I go back home to Pakistan and I can’t squat sit for a few minutes as my knees ache they all laugh at me 🤣🤣👌🇬🇧😂😂🇬🇧🇬🇧
I never knew that the chipmunks was nearby, I’m sure I can hear them talk away. On a serious note though, over in Blighty, we would have jigs for this and that, special formers to make the ends meet, here that they have a hammer and a lot of ingenuity! Well done…
Boa Noite A Todos ! Eu Acho Incrível Não Ter Uma Bancada ( Mesa ) Pra Trabalhar Em Pé, Ou Sentar Em Uma Cadeira. Acredito Que Dessa Forma Trabalhariam Com Uma Postura Saudável E Acredito Que A Produção Seria Maior E Mais Limpa. Realmente Não Consigo Entender Como Se Trabalha Numa Sugeria Dessa, Acho Que Não É Pobreza de Dinheiro, Mais Sim ( Sem Querer Ofender ) de Cultura. Saudações A Todos ! Cosme - Brasil
A mate of mine spent time in India a few years ago, and watched a bloke beat a Royal Enfield petrol tank out of a sheet of steel, held in his lap and beaten out with the arse-bone of an ox, and gauged by a myopic eye
Personally it makes me greatful for all the nice things / clean work environments that we have in the US. Kinda shows you how most of the rest of the world works. You don't need super clean factories or CNC everything to make quality stuff. Just sayin..
@@Stickerz94 Oh I get it!🤔 Don't DARE tell the truth😕 Well sorry princess I am stating a fact. They work in abhorrent and disgusting conditions, breathing in poisons welding with out eye protections and teach their children to do the same. They might be poor but they just don't need to work in such conditions. They too can change. Honesty is not a crime. AS you have labeled my origin because of my comment, you should not assume anything? I don't live in the USA by the way
@@lkytdsvc it was a joke princess. Sorry to offend you🤣 out of curiosity what country DO you live in? I'm not saying the working conditions they have are good or healthy, but it is what it is in some parts of the world, and I am sure they are working towards changing for better conditions. People typically don't tend to make their environments worse lol, and large, clean facilities are NOT cmheap by any means. P.S. that type of comment typically comes from ignorant Americans, so yeah, I did kinda ASSume your country LOL🤣
Sanjay, stop hammering that metal without ear defenders. Pardon Boss, I didn't catch that. Sanjay, stop hammering that metal without ear defenders. Pardon Boss, I didn't catch that. I said Sanjay, put some ear defenders on or you will damage your hearing. Yes Boss, its half past 3.
Без слёз смотреть нельзя.
Работают без перчаток и спец.одежды. Вот настоящие мастера. И спина у них железная, раз в такой позе сидят целыми днями.
This is the first time I've ever seen a fuel tank need restoring and de-rusting before it's even built!
Сварщик к старости наверное хочет ослепнуть.А маляр вообще огонь,я думал что хоть красить будет пульвером.Из всего цивилизованного,это гибочный пресс.
Их же много, завтра нового найдут
La seule solution c’est détruire ces usines d’esclavage et de merde.
Походу ребята о перегородках в баках не слышали ? За то какая экономия одна распорка в виде пластинки и всё !
Как правила в банках скапливается грязь, как их потом промывать, сливной пробки нет! По ходу у них слив топлива не редкость!
Мне кажется они маской сварочной чисто на камеру пользуются а так без неё всегда варят.
Этот бак будет дыра на дыре, что с маской что без маски. А насчет маски - ослепнет один сварщик - возьмут другого такого же, одноразового.
è pure rotto il vetro...
@@zzz13zzz17 тоже интересно. Даже герметичность не проверили
@@Vladimir_m9snik а хороший сварщик и не проверяет за собой))
How does he endure the arc-flashing? Supposedly it’s really bad, like the pain of corneal abrasions. (Which I have had, unlike “arc-eye.”)
Я так понимаю, зайдя на этот "рынок" в финале можно собрать машину целиком?
That guy stick welded that sheet metal tank with no leaks! That's impressive. No TIG, No MIG, no shielding gas, no vice grips, no clamps, no gloves, wearing sandals. wow.
no leaks ? how can u tell ?
The flux coating on the rod acts like a shielding gas and its most likely a low penetrating 7014 welding rod.
0
il lugo meteo
А переборки для гашения колебаний жидкости где? Или это стационарный бак?
И нет заборника, просто трубку воткнули. И сливной пробки нет, отстой как сливать? Короче жесть, а не бак.
это индийский бак, им можно без перегородок. их там полтора миллиарда сидит уже
на 10:40 жалкое подобие вварил🤣🤣🤣
@@lion1746 and I think that's for structural support only.
Такой совет и инженерам ВАЗа - классики, не помешал бы)))
It cracks me up everytime I see guys doing work like this wearing sandals
Whatever truck that goes on that fuel systems definitely got its work cut out to filter out all the rust
I was getting arc eye just from watching this
me too
Des pauvres ouvriers travaillent comme des esclaves. Sans aucune protection pour quelque dollars 💵💵💵.
Tandis que la patron gagne plein d’argent pour aller s’amuser 👯👯♀️👯♂️💋💋💋 au pays de liberté en Europe et Amérique
@@alexmartinez3862 ll^o Ssqsssqqsssqssqsq9sqqsOqqsSw9o@ppppş
А если им дать полуавтомат и маску хамелеон! На что тогда, они будут способны?
Балгарку и спецодежду. Вообще молодцы, не каждый вот так на коленке сможет такое сделать.
Они порвут нафиг мир, поэтому им ничего никогда не дадут
That rust and welding slag is going to make them fuel injectors work really well . Oh and the sand, always working in the sand.
Me impresiona ver cómo se sientan, se ve que es parte de sus vidas sentarse así, otra cosa que me impresiona es que todas estas industrias son rudimentarias y trabajan en el suelo lleno de tierra, sea lo que sea que fabriquen el piso es de tierra, todo muy sucio y contaminado pero en sus ojos se ve que son muy trabajabadores y buenas personas.
exacto son muy trabajadores y talentosos lo unico malo es la falta de equipo adecuado,tanto de proteccion personal como equipo de trabajo
Amigo que país é esse ?
@@juniormotosba estoy casi seguro que es Pakistán
@@nito092 Yes, I believe that it is Pakistan.
And now all you need is a fuel filter that is bigger than the tank....
Why do these videos speed up and slow down? Impossible to watch...
I was going to ask about same thing. Really annoying.
EXTREMELY ANNOYING
très agaçant ! (very annoying!)
Stopped watching...
Listening to this is the equivalent of taking a hit of acid.
молоток да зубило, вот и весь инструмент. Хорошо, что хоть сваркой можно резать
I am surprised that there are no baffles in these tanks.
I think that center support pseudo doubled as one 😅
الله يعطيك الصحة وطول العمر انت معلم فنان تبارك الله عليك يا اخي اخوك حسن من المغرب ارجو لكم التوفيق والاثقان في العمل يا الشعب العزيز
یہ صرف ایک پٹرول ٹینک ہے، تاج محل نہیں۔
If I was a chipmunk on acid this is what I’d hear.
Удачи и здоровья вам и вашим близким. Хорошо, когда люди умеют работать руками.
👍👍👍👍👍👍Спасибо, что поделились Я люблю смотреть твои видео
there must be partitions inside the tank. soothes diesel fuel, the fuel does not pump in the tank.
there called baffle plates
@@margarita8442 Yes. you're right.
If I was that welder I'd prioritize getting auto darkening helmet over food.
Where are you, Holy Devil? I can't see so good anymore.
If this is Pakistan you would die a few times from starvation before gathering enough money
Видимо религия не позволяет сделать его без грязи и ржавчины.
¡¡Buen ángulo de observación...!!
Религия не причем дядь. Вон русские христиане до сих пор жигули штампуют на зарубежном оборудовании, а другие христиане в мерседесы делают. Так и есть развитые мусульманские страны, так и отсталые. Дело в в другом видимо...
@@meirbekleker8637 ваше не понимание значения и воздействия религии на общество не делает вас правым.
@@TheFeFactor Еще раз говорю. Религия тут не причем. Если они действовали строго согласно религии, в данном случае Ислам, то там была бы идеальная чистота и порядок.
Бывали времена, когда наукой правили мусульмане.
@@meirbekleker8637 так себе аргумент. Вы же наверняка помните, что во имя религии живьем сжигались ученые и чума распротанялась в церквях (целование креста например)
Мододцы с минимум инструмента сделали бензобак .не мешало бынадно приварить заглушку резбовую чтобы бак промывать!
ماشاءاللہ۔ بہت زبردست ویڈیو تھی بہت اچھا لگا دل خوش ہو جاتا ہے جب محنتی لوگوں کو کام کرتے دیکھتا ہوں ۔ اللہ تعالٰی آپ سب کو اسی طرح خوش رکھے آمین۔🤲
"اپنے حوصلوں کی پرواز اونچی رکھو ایک دن
مکان بھی بن جائیگا اور مقام بھی بن جائے گا۔"
Yeah I want all the slag for my fuel system!
The title is wrong this is actually how you can whole bluefin tuna.
I am constantly amazed by the skills of the fine people in these videos!
But I can’t understand why you won’t use a table for standing up while working on projects?
It would help your posture tremendously and speed up the work even more.
Thank you for the amazing videos !
Lo mismo digo yo trabajar en el piso es muy incomodo
100% agree with you especially both of my knees are bad. But they get the job done their ways very skilled people.
If you are accustomed to siting on your haunches it doesn't matter.
The advantage of working on the floor is you are able to use all four limbs..
Japanese woodworkers too work on the floor.
I think you have to be a Slav or person from Asia... Grow up used to bending posture to understand this is quite natural. In the west its a completely different posture and your joints never get used to bending this way. l.
When I was a boy it felt perfectly natural to squat, and I think if I kept it up and worked at my flexibility and mobility and I could still comfortably squat. But now I am old and my joints are bad because of injuries and I never forced them remain supple.....
@G R they have limted space so it is not feasible to put a big table occupying a lot of space. That's why you see videos of workmen in asian countries like india Pakistan wtc working while sitting.
Скажите ему кто-нибудь что он без глаз скоро останется.
Он скажет, что на все воля Всевышнего.
I sure enjoy watching your fabrication work on these fuel tanks, lot of blacksmith work involved and that’s old school to me! That’s why I enjoy watching your guys do the preparation and fit ups on these tanks and they’re welding is amazing with no gloves or boots and just a pair of dark glasses! I’d love to know what type of welding rods y’all are using on these tanks, very inspiring to see! I also enjoy watching the laying out, shearing and bending process of the steel! Very educational and inspiring to see and I’m a 37 year on the job welding, fabrication of many tanks and vessels in a certified vessel shop , these guys are amazing at their job! Thanks for sharing and I always appreciate watching these jobs!👌🏻👌🏻🤙🏻🤙🏻🇺🇸
As much as I admire the skills and hard work of these workers, I get really angry when I see their employers did absolutely nothing about their safety
But blinking while you weld is JUST AS GOOD as a helmet!!! ;)
@@SteveShivik no you still get your face burnt by the welding glare, burns your skin worse than sunburn, I know how that feels being a fabricator for 30 years! It’s a rough job going home every day burnt up! These guys are amazing workers! I’m definitely can appreciate their hard work!
Third world has no OSHA
Sponsor these hard workers to come to America and we can protect them then we can export lazy people who need for our flag!
Электродом так очень трудно сварить герметично.
Great technology Goodです♪
А где продают гнутые электроды?
4:25 somebody PLEASE get this guy a helmet!!
he has one, he's choosing not to use it for the tacks. but don't worry he engages his safety squints perfectly every time.
Seems like the long welded joint would be on the top. Just sayin
Long welded joint should be on top, less chance of leaks.
True, but it would make the tubes for fuel, fuel return, and venting more awkward to place. Plus it looks better this way.
Is anyone else paying attention to the audio? It's bring back memory's of that one time I huffed gas.
I can't help but wonder how long it takes for these guys to go blind?
I've been welding since i was a kid,almost 60 years and I have macular degeneration.I have always used a helmet and gas welding goggles ,never ever even tried the squint method of eye protection. When you can no longer focus on the weld pool you are done. I'd say the tank builder is no more than his late 30's so it won't be long before he has cataracts ,which the US tax payer via the UN will rectify for him at no cost to himself. Pakistan is a nuclear power BTW>.
Of all the people coming across American borders we need to sponsor these people to come help make America great again and deport the unproductive people who just complain!
Изначально понял будет топливный бак, а зачем в горловины прожгли отверстия чтобы не сливали топливо.
Прикольно, сразу делают противосливную горловину!
Даже гайку для слива отстоя не делают
@@Pikulev_Evgeniy они и датчик уровня в принципе не планировали
@@flashgarage ,может электрод суют в горловину или спицу какую-то
@@Pikulev_Evgeniy скорее на глаз и интуицию
Bet that welding is great on the eyes😆
Cataracts for sure in a few years as well as retinal spots.
لکھتے لکھتے قلم ہی ختم ہوجائے گی مگر میرے پیارے رسول اکرم صل اللہ علیہ والہ وسلم کی تعریف کبھی ختم نہیں ہو گی ❣😍
And most of their work is having to do it on the ground, definitely a back killer! Thanks for sharing my friend!
Although these people may not be well-educated, their skills really make them stand out. I am very impressed with the local talent but I also have a complaint from them that they do not show professionalism. For example, in the same video, you can see that a fuel tank was built with great skill, but the inside of the fuel tank was not cleaned and small pieces of metal that had fallen due to welding were not removed. Think for yourself how much damage this thing can do to the main engine.
so they use a filter
Why do you assume they aren't well educated? Being a trade person makes you educated.
Apparently you have also never heard of a fuel filter.
Also let's not forget that the quality of diesel they are using is not up to western standards anyway so that bit of dirt doesn't really matter in the bigger picture.
где пробка сливная??
Нафига?! Они и в заливной горловине дуршлаг делают,чтоб шлангом не слить)))
С отстойника соляру легко можно спиздить.
Хотя у нас в таком случае просто дыру в баке ломом или топором делают
Really admire their skills. But please use safety gear.
ڈیزل ٹینک بغیر گیج کے ۔اسی وجہ سے اکثر گاڑیاں ایئر لاک ہوتی ہیں دو چار مرتبہ گاڑی ایئر لاک پمپ کا بیڑہ غرق ۔
A young Tony Angelo in action here pre Hotrod Garage
Brilliant video and brilliant workers
What kind or type of welding rod are they using? Is it something like 7018 or 6010. I’ve been welding my entire life and I’ve never seen welding rod do that good on thin steel
Straight Rutile 6013 supposedly has low penetration.
No slosh plate and maybe a sealant at either end just for added security?
They dont break 60 often there so not much sloshing going on. Traffic jams are the norm.
good
Крассавчики,я сам сварщик и мне нравится их покуестический подход.интересно какие индийские электроды судя по видео они как китайские горят.
ЭТО Пакистан...
@@user-sj3gh6tf2x игорь вы очень умный,спасибо что подсказали.тогда поменяйте у себя вместо индийских электродов на пакистанские.
мне тоже интересно - какие электроды варят сверху вниз.
The anti siphon baffle must make filling the tank a long chore.
This is not a proper making. Inside not provide stopper plate for moving fuel .
Yeah I was gonna say about a slosh plate
@@piperdoug428 pakistani videos so many i have seen already never work properly and show the videos stupid
good job with high skill
Nice paint job.
Top...Recebe um like do Brasil..
Wonder why nearly everyone in these countries want to sit in the dirt and work on the ground? It's crazy they don't have work tables. And they never clean up the junk and trash etc. what's up with these people?
السلام عليكم ورحمة الله وبركاتة تحياتي لكم جميعا من المغرب
Hi to all the people commenting about no benches and working of the floor .. yes we have a different way here in the west .. we work upright and of benches etc .. it’s just the way these guys have been doing for centuries and works best for them , they can work and have to work any terrain ,, jungles outbacks or a ditch in the road .. you can’t change them that’s their work method .. lol I too have been corrupted by the west so when I go back home to Pakistan and I can’t squat sit for a few minutes as my knees ache they all laugh at me 🤣🤣👌🇬🇧😂😂🇬🇧🇬🇧
Закинули станки ,дали знаний развивайтесь.
They don't have any power tools like cutting drilling grainding machines? 🤔 Well done 👍
После просмотра роликов я одного не понял. Нахрена ему маска при сварке? )
Wow amazing brother
Loved how he preheated the welding rods.
Enjoyable video.
Not pre heating, just making it easier to start the arc on the work piece.
@@bobsmith9329 what it does is make the tip hot so as it strikes easier.
Стало быть окалины от сварки как присадка к топливу идут
i quess you could call that a fuel tank
I couldn't agree more!
Pakistan can go ahead..
Can progess invest in education than other things
slap some of the world’s thinnest paint on it, that’ll sort out the dozens on pinholes along those welds
I never knew that the chipmunks was nearby, I’m sure I can hear them talk away.
On a serious note though, over in Blighty, we would have jigs for this and that, special formers to make the ends meet, here that they have a hammer and a lot of ingenuity! Well done…
you forget to mention about leak test., Will cost you $1.50 more.
I thought it was the Minions!
Boa Noite A Todos !
Eu Acho Incrível Não Ter Uma Bancada ( Mesa ) Pra Trabalhar Em Pé, Ou Sentar Em Uma Cadeira. Acredito Que Dessa Forma Trabalhariam Com Uma Postura Saudável E Acredito Que A Produção Seria Maior E Mais Limpa. Realmente Não Consigo Entender Como Se Trabalha Numa Sugeria Dessa, Acho Que Não É Pobreza de Dinheiro, Mais Sim ( Sem Querer Ofender ) de Cultura.
Saudações A Todos !
Cosme - Brasil
A mate of mine spent time in India a few years ago, and watched a bloke beat a Royal Enfield petrol tank out of a sheet of steel, held in his lap and beaten out with the arse-bone of an ox, and gauged by a myopic eye
Для маски ещё одной руки не хватает
I would be too embarrassed to show the world how these tanks are made and the conditions that people are made to work in.
Isn't it great living in the USA with such high standards on how you think the world should work?
Personally it makes me greatful for all the nice things / clean work environments that we have in the US. Kinda shows you how most of the rest of the world works. You don't need super clean factories or CNC everything to make quality stuff. Just sayin..
@@Stickerz94 Oh I get it!🤔 Don't DARE tell the truth😕 Well sorry princess I am stating a fact. They work in abhorrent and disgusting conditions, breathing in poisons welding with out eye protections and teach their children to do the same. They might be poor but they just don't need to work in such conditions. They too can change. Honesty is not a crime. AS you have labeled my origin because of my comment, you should not assume anything? I don't live in the USA by the way
@@lkytdsvc it was a joke princess. Sorry to offend you🤣 out of curiosity what country DO you live in? I'm not saying the working conditions they have are good or healthy, but it is what it is in some parts of the world, and I am sure they are working towards changing for better conditions. People typically don't tend to make their environments worse lol, and large, clean facilities are NOT cmheap by any means.
P.S. that type of comment typically comes from ignorant Americans, so yeah, I did kinda ASSume your country LOL🤣
@@Stickerz94 Waiting to see that quality stuff.
Do you have spare eyes for workers? And sorry, friends, this tank will be full of leaks, may be right now, may be not right now, but it will
Guy who is welding is gonna go blind mark my words 🤔
How the hell can he weld without Shoes.
Skilnya luar biasa...
It looks like the gentleman, made his hammer, too.
Các bạn ở đất nước nào? Tôi rất trân trọng những đôi bàn tay vàng của các bạn.
Каменный век. Конец. Начало железного.
Every thing is made to the thinnest gauge, no stiffners, no baffles. Customer gets what he pays for.
Бак пере покраской обежирили и погрунтовали молодцы
Where is the partition in tank
These people amaze me for their work.
Контроль щільності бака.Ні,не чув,не знаю.
I see he is using his safety squints to weld... :D
Indian no 1
Nice👏🏽
Me gustan mucho estos vídeos pero ponga un filtro cuando estén soldando, lastima como si fuera yo el que estuvo soldando.
Excellant work with good finishing
Sanjay, stop hammering that metal without ear defenders. Pardon Boss, I didn't catch that. Sanjay, stop hammering that metal without ear defenders. Pardon Boss, I didn't catch that. I said Sanjay, put some ear defenders on or you will damage your hearing. Yes Boss, its half past 3.
It would have been a nice fuel tank if they used a welder with shielding gas
Интересно, молодцы!
Skilled people