Thank you! I rewatched a few times, played with it and now I can tie a knot. Thank you again for your patience. You’re right, practice makes perfect. Bless you! Asé Amen A’ho!
Wonderful, thank you! One of the knots of my slip knot necklace came undone, and your video was the one (after watching a few) that finally helped me understand how to tie it 😊🙌
Thank you sm for the video!!! The cord for a necklace I wear daily came untied and I was very distraught for a minute thank you for making such a cohesive tutorial
Appreciate you! I watched other methods and I guess because my cord is small in diameter and length (precut rope and pendant bought on a whim), either the knots would get pulled too tight and I couldn’t slide them or I couldn’t do their methods because it was too hard without a lot of slack. Your method made it so much easier for me! I have one suggestion (and please feel free to ignore this if you are not looking for suggestions for your videos) for us who need the “knots for super dummies” speed 😂- if you slow down the speed during the second or two when you’re actually doing the tying motion, it might be a bit easier for us, the viewer to follow along. Hitting the rewind 10s function brings it back too far and trying to slide the slider bars just enough for that couple of seconds while also following in real time is so tedious lol. I’m just nitpicking here and either way you’re so helpful and I am grateful for your video! It was still informative and helped me! Thank you so much!
So glad it was helpful! Thanks for your feedback! Always looking at ways to improve. Such a fine line with video speed, users want very fast content these days! Thanks for watching 🌻
thanks for this, i painted a dollar for the girl im talking with. we're gonna meet for the 2nd time and i was literally crying bcoz idk how to knot like this. now i got it thanks💟
For the 50" length- Where does the pendant sit on a typical neck- chest without being adjusted? And does this knot allow the necklace to be worn higher up to the throat or do you suggest using less total length to accomplish this rather than the full 50". Just not sure how much it tightens and what it looks like when it does so. Drilling boulder opals for pendants, And let's just say i'm not knot/ necklace savy 😂 Australian opal cutter, novice jewelry making skills. Cheers
What length is a good one to make the initial starting cord for a guys necklace that typically wears the pendant just a couple inches below the t-shirt collar? It looks like 50 inches would be a bit too much waste maybe?? Great video and you definitely have better, clearer instructions than other videos I've watched. Thank you
Thanks for the video. I will be making something like this for my 7 year old daughter and this video is helpful. I see you are in Australia but it sounds like you have a Kiwi accent.
I have a premade sliding neckalce with a pendant. But I have a new pendant I’d like to try. Is there a way to undo a sliding necklace to add a new pendant?
i have a kind of slippery silky cotton cord to use-and I've lost 2 pendants recently b/c the knot I tied just simply opened and the cord stayed around my neck and the pendant went bye bye. Do you think the slippery cord will work? what I'm hanging is kind of heavy.
Hi, love how easy is to make this, I have a question... a few months ago I bought a adjustable choker necklace and after a couple months just broke in two,tried to fixed but broke again. My question is what's the best durable material I can use for this type of necklace? Thank you!
Great question! I love leather but find it does break after a while. I find waxed cords more durable so try a waxed cotton or waxed polyester cord 1-2mm and it should last much better. Good luck! Thanks for watching 🌻
Thank you for this wonderful tutorial, just a question tho, I want mine to be more of a choker length at its tightest and have just above the cleavage at its longest, can you recommend how long my total cord should be? Thank you! 💕
See my other comment reply for the 1mm waxed twine or you can also use 2mm leather as seen in some of my other videos. Just depends the thickness you want. Good luck! creativefnk.com/products/2mm-leather-cord
Good supplies are hard to find! I mostly use 1mm waxed twine for sliding knot necklaces. You can find it on my website here creativefnk.com/products/1mm-waxed-twine
Are the knots together? Or near the pendant? You may need to untie them and retie them in a better position. You should be able to slide them to make it bigger or smaller, if not - the knots are in the wrong position and you need to re-tie them. Good luck 👍
Thank you for this tutorial. It's exactly what I needed to make a necklace from a rose quartz my daughter gifted me. Feeling grateful today
How did you get the string attached to the quartz?
@@TherealBig_Aldrill maybe
literally took 1 watch and i made 10 of necklaces. thank you so so so much you are amazing! super easy explanation and straight to the point!
Thanks for the feedback! That makes me happy 😃 Glad my video was helpful. Thanks for watching 🌸
How do you get always same size for more of one specific necklace?
This is now the 3rd video I watched regarding "How to Sliding knots" and 3rd times a charm because yours was the best done! Thank you so much!
Thank you! I rewatched a few times, played with it and now I can tie a knot. Thank you again for your patience. You’re right, practice makes perfect. Bless you! Asé Amen A’ho!
Thanks! I watched a lot of shorts where people weren’t explaining or going too fast. This made it so simple to understand it took one try!
Excellent! Glad to hear my video was helpful 💫🌻
Thank you so much! I tried several other methods to do this which were convoluted. You make it so easy!! Much appreciated.
So happy to hear that! Glad it was helpful 🌻
so useful!! i could also easily see how she ties it unlike some other people. Thank you!
So happy to see this comment thanks for your feedback! Glad you enjoy my videos!
TH-cam is the best website of all the times thank you ma'am
Great instruction! For anyone making more of a choker fit, I used ~35 in of cord
Wonderful, thank you! One of the knots of my slip knot necklace came undone, and your video was the one (after watching a few) that finally helped me understand how to tie it 😊🙌
Thanks for sharing that! So glad my video was helpful 🌻
Same here, helped me fix mine as well
Thank you sm for the video!!! The cord for a necklace I wear daily came untied and I was very distraught for a minute thank you for making such a cohesive tutorial
Hi. Thank u. It's so easy. Now I'm going to watch the video a few times more so I can. Remember it forever. Very helpful thank you 😎❤️
major teacher genes here :) my jade gem hangs secure and adjustabe from my neck, thanks!
Thanks a bunch!! I had a really important charm I wanted to put on a good necklace and I was able to make one with a shoe lace with your help!
Yay! Thanks for your feedback, so glad my video is helpful 🌻
So easy thanks. First go and got it perfect
I slowed video down on 0.75 and it helped. Thank you for the video! I made double corded for my larimar stone!
This was a great tutorial video. Thank you!
Nice! Thank you for the simple tutorial!
Glad it was helpful ✨🌻
Thank you. You give great instructions.
Appreciate you! I watched other methods and I guess because my cord is small in diameter and length (precut rope and pendant bought on a whim), either the knots would get pulled too tight and I couldn’t slide them or I couldn’t do their methods because it was too hard without a lot of slack. Your method made it so much easier for me!
I have one suggestion (and please feel free to ignore this if you are not looking for suggestions for your videos) for us who need the “knots for super dummies” speed 😂- if you slow down the speed during the second or two when you’re actually doing the tying motion, it might be a bit easier for us, the viewer to follow along. Hitting the rewind 10s function brings it back too far and trying to slide the slider bars just enough for that couple of seconds while also following in real time is so tedious lol. I’m just nitpicking here and either way you’re so helpful and I am grateful for your video! It was still informative and helped me! Thank you so much!
So glad it was helpful!
Thanks for your feedback! Always looking at ways to improve. Such a fine line with video speed, users want very fast content these days!
Thanks for watching 🌻
You can hit the settings button at the top of the video and it slows the video speed down for you. 😊
@@creativefnkif people click on the settings above the video, you can choose a speed for the video, you can slow it right down if you need too x
@@Crafting_With_Laura_x thank you!
Amazing video!!! Ive watched multiple tutorials without any success, until I found this masterpiece. I thank you for this
Excellent! So glad my video was helpful! Thanks for watching 🌻
Excellent tutorial, thanks a lot!
Thank you! I was thinking of this and you showed me how. I did it. Now I’m ready to put holes in my shells. ❤
Yay! So glad you enjoyed my video! Thanks for watching 🌻
Thanks ❤ greetings from Malaysia
thanks for this, i painted a dollar for the girl im talking with. we're gonna meet for the 2nd time and i was literally crying bcoz idk how to knot like this. now i got it thanks💟
Thank you so much, I was struggling with this but took to your method much easier.
So glad my video was helpful! Thanks for watching 🌻
Great video, simple and effective. Thank you!
Thank you for this tutorial. I made one. It's easy to follow. Like it
So glad it was easy to follow and helpful! Thanks for watching 🌼
Oh gosh, perfect explanation, thanks!
Perfect! You are welcome glad you enjoyed! 🌻
Oh thank you so so much for this simply way to do a sliding knot
So glad it was helpful 🌼
thank you so much! i have a flat pendant with a hole that was too small to push a folded string through, this helped immensely in attaching it
Excellent! Glad my video was helpful! Thanks for watching 🌼
Yes! Thank you this was perfect 😊
Excellent! 🌻💫
Thank you so much for helping me make this necklace ❤️😊
I watched 6 videos before finally stumbling on this one and actually managed to do it😂
So good! Thanks for sharing. Glad my video is helpful 🌻
so helpful thank you!! 🤍
Glad you enjoyed it 🌻
For the 50" length- Where does the pendant sit on a typical neck- chest without being adjusted? And does this knot allow the necklace to be worn higher up to the throat or do you suggest using less total length to accomplish this rather than the full 50". Just not sure how much it tightens and what it looks like when it does so.
Drilling boulder opals for pendants, And let's just say i'm not knot/ necklace savy 😂
Australian opal cutter, novice jewelry making skills.
Cheers
So helpful. Thank you!!
Great! Glad my video is helpful 🌻
What length is a good one to make the initial starting cord for a guys necklace that typically wears the pendant just a couple inches below the t-shirt collar? It looks like 50 inches would be a bit too much waste maybe?? Great video and you definitely have better, clearer instructions than other videos I've watched. Thank you
Just fix my favorite necklace thank you!!!!!
Amazing! So glad I could help! Thanks for watching 🌸
Beautiful. Thank you. ❤
Thanks for watching 🌻
ahh this is so clear thank you!!
Thanks so much for taking the time to comment and let me know! I’m so glad you found it helpful! Thanks for watching 🌻
Thanks for the video. I will be making something like this for my 7 year old daughter and this video is helpful.
I see you are in Australia but it sounds like you have a Kiwi accent.
Haha sure am! Kiwi living in Oz!
So glad you enjoyed my video! Thanks for watching 🌼
This helped.. Thank you ❤️
Wow well done
I've been trying to figure out that knot, but it just falls apart when I try to tighten it
U help me today thanks
I did it lol thank you
Yippee 🥳
Hii can you tell me which type of thread did you use??
@@ritikamandal6253she uses a cotton cordd
@@niyatichowdarykollu9649 this cotton cord is thick but which I brought is thin and it is so flexible
I have a premade sliding neckalce with a pendant. But I have a new pendant I’d like to try. Is there a way to undo a sliding necklace to add a new pendant?
Loved it.
i have a kind of slippery silky cotton cord to use-and I've lost 2 pendants recently b/c the knot I tied just simply opened and the cord stayed around my neck and the pendant went bye bye. Do you think the slippery cord will work? what I'm hanging is kind of heavy.
Hmmm slippery cord is a bit risky unless you can tie the knots super tight. I find a waxed twine is better because it grips without coming undone 🌻
Hi, love how easy is to make this, I have a question... a few months ago I bought a adjustable choker necklace and after a couple months just broke in two,tried to fixed but broke again. My question is what's the best durable material I can use for this type of necklace? Thank you!
I have the same problem, the leather cord I use is spliced together and always breaks at the splice. Frustrating for sure.
Great question! I love leather but find it does break after a while. I find waxed cords more durable so try a waxed cotton or waxed polyester cord 1-2mm and it should last much better. Good luck! Thanks for watching 🌻
Thanks so much!
🌻💫🌼
Bugger, cut my cords too short before I watched your excellent video.
It is helpful.
Tks
Thank you.
Thank you!!!🙌 💗
Thank you for this wonderful tutorial, just a question tho, I want mine to be more of a choker length at its tightest and have just above the cleavage at its longest, can you recommend how long my total cord should be? Thank you! 💕
in my opinion it’s a little hard to make then again I think everything’s hard on TH-cam
Keep practicing! Nothing is easy at the start 🌻
Eureka!!
Thank you so much!!❤
Better than the one with 45k likes that I rage quit on. 🤣
I love the knot to hold the shell in place too. 🙏
thank you very much, can you send me the link where you buy the cotton cord? i cant find . thx
See my other comment reply for the 1mm waxed twine or you can also use 2mm leather as seen in some of my other videos. Just depends the thickness you want. Good luck! creativefnk.com/products/2mm-leather-cord
Thanks!
How do I adjust mine to make it longer?
You can loosen the knot and slide it along the thread before pulling it tight again
i cant find good cotton cord, so if you any recomand for a good one?
Good supplies are hard to find! I mostly use 1mm waxed twine for sliding knot necklaces. You can find it on my website here creativefnk.com/products/1mm-waxed-twine
Please give me products name
It feel like my necklace is stuck and i cannot make it smaller any tips
Are the knots together? Or near the pendant? You may need to untie them and retie them in a better position. You should be able to slide them to make it bigger or smaller, if not - the knots are in the wrong position and you need to re-tie them. Good luck 👍
Thanks 💞💞💞💞
Welcome 🌻
How do you make a hole without a drill?
Try this technique in our other video!
th-cam.com/video/Ad8eZfjk-C4/w-d-xo.htmlsi=0f8ObcSW8C1zwH-i
Good luck 🌻💫
Thx 🙏🏽
Thanks for watching 🌻
what material is the necklace
Thnkz akki❤
🤩
thank youuu
Thanks for watching 🤩
Am I the only one thinking of “where the crawdads sing” 👀
thanks
You're welcome! 🌻
Cheers
works,
I took 10 watch and made 0 of necklace!!!! :( but thats on me
I took 10 of necklace and made 1 watch
that's on me, too
I made it in one watch. I think u r not so smart
A little too quick on the demo. Also there is way not to waste any cord on the first knot near the pendant. Still thumbs up!
how much cm do you use ?
It’s about 127 cm 🌻
Thanks