Ha ha, I was out On a call today for an A/C new Install quote. new condenser fan motor was just Installed by some other company, the Motor Thermally cut out 10 minutes after installed. so the guy called me for a quote for a new system, Ended up saving his system in about an hour. Technician wired a 4 wire motor in where a 3 wire was and put the Brown white on the fan side of cap and the brown on the common, but the common wire was still hooked up the the Dual run cap. The motor was Not a happy camper, Pulled 6 Amps that way when it should have pulled 1.6 cant believe that company just left it at that and quoted a new system. we got the customer a few more years out of his Non leaking r22 system. I see now how the Rescue motors can Bite a tech pretty quickly, amazes me they dont teach about the capacitor wiring better in school. Always Enjoy your videos Man, Love from Colorado :-)
Another capacitor slowly turning into a resistor. People are always so amazed when I change a capacitor and the unit starts. Even more so when I am the second opinion.
I Was Like the 3rd or 4th opinion yesterday on a compressor. Video scheduled for tomorrow night. I Was the Hero Yesterday ! It Felt Good ! Im Pretty sure ive got Job security after what i saw Yesterday ! 😂.
Your video was incredibly informative and provided practical solutions for troubleshooting and resolving this common issue of refrigerator not cooling. We provide genuine Traulsen refrigerator spare parts.
Man that was a gravy job! They should have left you spoons instead of forks for all that gravy. I love it when the torch and the vacuum pump stays on the vangina.
Good Vid ! I Love Traulsen Boxes ! I Commonly see Traulsens Last 30 Years or More. Still Going. They are Totally Rebuildable until the Floors Get a Hole in them & Walls Get Pin holes. Then they are Junk. Thats usually 40-50 years Later. That One was not that old. A98 Last Digits. A= January. 98= 1998. For the New guys ! 22 Years old.
Reminds me of one I went on today. Walk-In Cooler had a failed run cap. 45µf. Replaced it and it cycled on head pressure cut-out. The condenser had absolutely no open area on it because it was full of seagull feathers. I just wish I could share the pic with ya. My co-worker said I could make two birds out of what I removed from that coil.
This was a very strange service problem that may never happen again. I serviced 11 Red Lobsters in Atlanta in the 70's and they all had Traulsen reach-ins with Copeland semi-hermetic compressors. The problem was that the case was freezing up and would not cut off. The thermostat checked out OK. I had to unplug it to shut it down. After much head scratching I checked the compressor more thoroughly. The amp draw and it was normal. The windings added up exactly on my Simpson 260. Then I checked to ground and found a dead short. The thermostat had been previously replaced. I checked it again and found that whoever replaced it had wired the neutral leg through the stat instead of the hot leg. I think that it probably came wired this was from the factory. When the stat broke the neutral the condensing unit kept on chugging with power from hot to ground. Those old Copeland compressors were tough and determined to run.
Hi I have been watching some of your videos. I live in Sacramento county, I have a Traulsen 3 door freeezer that is not cooling. I wonder if you can help?
We were always thought to not gauge up on small plug in units.. everytime you do you lose a bit. We usually just check gas temps the suction and discharge and evap. Those schrader valves are temperamental man. You never know what your gonna get with them.
The intro has some nice new touches.. that SB was a great song..😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣..that description sounded like a play by play fir porn. Great stuff.. hot potatoe..always fun to play with capicators.. be safe brother Dave.
Love your work, just please don't move your camera around so much, motion sick. / I've been a fan for year and your video have helped me tons. You are my go to for ideas, and tools. Plus love your saying " multiple offender. ". Gets me through the day.
I left commercial food service equipment in 1994. So those boxes look identical as in 90s. It still blows my mind they these restaurants are still filthy . The top of that box was gross and disgusting. I can imagine what the hoods look like. So sad these operators don’t give a shit.
SoyBoi!! Hahaha!! Hilarious!! I feel like the biggest tool buying them for girl. But shit-she’s worth it and likes them white claws. Thanks for the Klein deal
Ha ha, I was out On a call today for an A/C new Install quote. new condenser fan motor was just Installed by some other company, the Motor Thermally cut out 10 minutes after installed. so the guy called me for a quote for a new system, Ended up saving his system in about an hour. Technician wired a 4 wire motor in where a 3 wire was and put the Brown white on the fan side of cap and the brown on the common, but the common wire was still hooked up the the Dual run cap. The motor was Not a happy camper, Pulled 6 Amps that way when it should have pulled 1.6 cant believe that company just left it at that and quoted a new system. we got the customer a few more years out of his Non leaking r22 system. I see now how the Rescue motors can Bite a tech pretty quickly, amazes me they dont teach about the capacitor wiring better in school. Always Enjoy your videos Man, Love from Colorado :-)
That’s good old, old school repair with the customer in mind. Awesome
You Teach me a lot on this Chanel worked on an 82 beverage air prep table today still kicking
More NOR-CAL! this whole HVAC/Refrigeration is fascinating. Glad the vids are back..
Another capacitor slowly turning into a resistor. People are always so amazed when I change a capacitor and the unit starts. Even more so when I am the second opinion.
That’s when you look like a rocket 🚀 scientist to the customer
I Was Like the 3rd or 4th opinion yesterday on a compressor. Video scheduled for tomorrow night. I Was the Hero Yesterday ! It Felt Good ! Im Pretty sure ive got Job security after what i saw Yesterday ! 😂.
nobody wants to repair when they can sell sell sell (and get kickbacks for it) or perhaps they're actually to dumb to repair them lol
@@throttlebottle5906 👍
Your video was incredibly informative and provided practical solutions for troubleshooting and resolving this common issue of refrigerator not cooling. We provide genuine Traulsen refrigerator spare parts.
Forkatitus. That’s great, dig how upbeat you are man. Keep on truckin’
Great video.I also like the sound of ur laughter. God Bless.
Your videos are awesome and your always are in good spirits too. Keep up the great work Dave 🔥🔥🔥.
That's FORKING FUNNY!!🤣🤣
Thank you for sharing. I'm happy to see you making videos again
Man that was a gravy job! They should have left you spoons instead of forks for all that gravy. I love it when the torch and the vacuum pump stays on the vangina.
Good Vid ! I Love Traulsen Boxes ! I Commonly see Traulsens Last 30 Years or More. Still Going. They are Totally Rebuildable until the Floors Get a Hole in them & Walls Get Pin holes. Then they are Junk. Thats usually 40-50 years Later. That One was not that old. A98 Last Digits. A= January. 98= 1998. For the New guys ! 22 Years old.
Great video
There Lucky the forks didn’t do any damage.
Good video. Nice easy call.
U rock brother your videos are helping me a lot keep up
Back in the saddle again 👍👍
Reminds me of one I went on today. Walk-In Cooler had a failed run cap. 45µf. Replaced it and it cycled on head pressure cut-out. The condenser had absolutely no open area on it because it was full of seagull feathers. I just wish I could share the pic with ya. My co-worker said I could make two birds out of what I removed from that coil.
I just hand a Vanilla Latee 🤭😬. Blue blue blue 😎👍🏼. Nice video Dave !!
Your uniform skinny jeans and a sweater?
Nor-Cal Refrigeration & H.V.A.C very close very close !!
4:44 im crying :))))))))
This was a very strange service problem that may never happen again. I serviced 11 Red Lobsters in Atlanta in the 70's and they all had Traulsen reach-ins with Copeland semi-hermetic compressors. The problem was that the case was freezing up and would not cut off. The thermostat checked out OK. I had to unplug it to shut it down. After much head scratching I checked the compressor more thoroughly. The amp draw and it was normal. The windings added up exactly on my Simpson 260. Then I checked to ground and found a dead short. The thermostat had been previously replaced. I checked it again and found that whoever replaced it had wired the neutral leg through the stat instead of the hot leg. I think that it probably came wired this was from the factory. When the stat broke the neutral the condensing unit kept on chugging with power from hot to ground. Those old Copeland compressors were tough and determined to run.
What gauge you used to check the charge on the compressor please
Glad your back at it 👍
Gud job
Good one Dave 🤟
somebody was really forking around with that unit :))
🤣😂🤣
Hi I have been watching some of your videos. I live in Sacramento county, I have a Traulsen 3 door freeezer that is not cooling. I wonder if you can help?
We were always thought to not gauge up on small plug in units.. everytime you do you lose a bit. We usually just check gas temps the suction and discharge and evap. Those schrader valves are temperamental man. You never know what your gonna get with them.
That’s what make the probes so nice low loss. Due to there size.
The intro has some nice new touches.. that SB was a great song..😂🤣😂🤣😂🤣😂🤣😂🤣😂🤣..that description sounded like a play by play fir porn. Great stuff.. hot potatoe..always fun to play with capicators.. be safe brother Dave.
Super Dave ... Doing what he do ...Lol ... Good vid ..
Another great video. What kind of coil cleaner do you use on the condenser and do you rinse with water
Frost king 5$ on Amazon yes rinse
He’s back!!!!
Great video 👍🏼 How much did the customer have to fork out for that repair.? 😂😂😂😂
Love your work, just please don't move your camera around so much, motion sick. / I've been a fan for year and your video have helped me tons. You are my go to for ideas, and tools. Plus love your saying " multiple offender. ". Gets me through the day.
1:55 you need to wear that while using your smurf BONERS! Looks like a smurf HAT!
Could happen on a live stream
Compressors forked!
🤣😂🤣😂
Pluggo Buggo and Forko Borko!
6:58 you missed a fork I hope you got it under the start cap lol
Ohh Dave.. I wet my self laughing with the forks and your comments and laugh.. great vid. Thank you
Your welcome
I left commercial food service equipment in 1994. So those boxes look identical as in 90s. It still blows my mind they these restaurants are still filthy . The top of that box was gross and disgusting. I can imagine what the hoods look like. So sad these operators don’t give a shit.
The inside where the food is is usually terrible I have many videos of it. Check out my channel
👍👍👍
🤘⚡️🤘
#310 thumbs up
Your funny pinche gabacho luke
Those forks 🤣😂, should have sold the forks back to them.
SoyBoi!! Hahaha!! Hilarious!! I feel like the biggest tool buying them for girl. But shit-she’s worth it and likes them white claws.
Thanks for the Klein deal
It’s forked hahahaha
only thing worse than the flavor of coffee, is when it's loaded with yuppie sweet shit.
🥰🙏🇱🇰🇱🇰🇱🇰🇱🇰🥰
I hit the subscribe bell, but since I was already subscribed.... now I'm unsubscribed 😲😲😲