Thank you for sharing. I built may warplanes from ww2 when I was young, and I have been thinking to start up and build models again. - The way you do / and have done all this work, and the superdetailed paint work is absolute awesome. - With great thanks to you, I will buy me a Junker 88, and other planes and Models, and try to build it like you have done. Also try to do the paintwork in detail and do it the way that you have shown. - Beautiful work you have done : ) - Thank you for sharing how to do you Master : ) Best greetings from Norway. Ole : )
Great work... please be so kind and answer for me to the followings question: - what pressure do you use when spray Gunze surfacer 1200 - what gritt is the sanding paper when you sanding the surfacer? kindly, George
GREAT work. I have this in my stash and you are really encouraging me to get it out and try it. May I ask though, did you remove the two rearward facing guns after undercoating?
Beautiful work as usual David. Just one question; After applying Surfacer and sanding, how do you remove all the dust for the next paint coats? Do you just brush it off or rinse the model in something?
pekna praca, dobre sa to pozera, co to mas prosim ta za stetce ktorymi malujes kokpit (biela farba) tie tenke s drevennou ruckou ? v 3 minute +/-. Diky za odpoved
Great job dude! I shared your channel in my facebook page and I got some questions about these models.What are you doing to those models after made up them?Are you hiding them or selling them?
So what do you think about Revell... I see you do Revell the least ... i do revell all the time because its only thing that we have in Croatia and.... Its not my fav Company
may I ask an obvious question? You demonstrate that oil based paints can be used with acrylics?? any issues at all with using them together? How do you choose what types and when to use them please?? love your attention to detail! Thanks
+PLASMO - plastic models Thank you for your prompt reply-essentially you need an acrylic gloss coat when using an oil based wash-otherwise the solvents used to remove the excess wash will affect the gloss coat? Have you had any issues with a gloss coat applied to an acrylic undercoat for example? sorry to labour the point on this-thanks in advance Regards
How big is it? It looks a bit small for a bomber, should i get this or something like a 1:48 tamiya p-47D, or a 1:48 f-104 from hasegawa? I really dont know what to get, i have enough money to get 2 or 3 models and a few tools
bit late perhaps but seeing as it's glossy paper he highly likely bought or borrowed a book about the aircraft. Search around for books that contain (rivet) plans. For example, for an FW 190 project I found an aero detail book which also inclused some colour photos and such.
I'll look into it after my current project: I'm not sure if you'll remember, I dared you to try an old tool airfix kit. As I recall you declined haha, but I picked up an old tool 1/72 airfix Mosquito. I managed to bag some CMK resin goodies for Hasegawa and Tamiya mosquitos. Plus with a bit of scratch building, I'm gonna attempt to make it half way acceptable! I'm videoing it but I'm not sure how to present it. Step by step videos, like one for the nose guns, then one for the engines, etc or just one long video? In your experience what is better received by the modellers here on TH-cam? Cheers Plasmo :D
I do not know. Many parts video is worst then one part video and it must be short too. Max is 15 minutes. I know it is impossible to present a model in 15 minutes but they are more successful then long videos. Just my opinion and statistics.
Ahoj Honzo. Zrovna v tomto videu používám obyčejný tamiyacký kulatý štětec malý. Jen pro orientaci, tak tady je link. Má syntetické štětinky, ale je docela odolný a levný. www.mpmshop.cz/naradi/stetce/tamiya/tamiya-87017.html Já teď na detaily používám hf štětec kulatý ultra. Sice je dražší, ale je fakt ultra tenký. www.mpmshop.cz/naradi/stetce/tamiya/hf-tatec-kulat-ultra.html
Kdysi jsem měl Ju-88 A taky od Revellu, ale ten se s touhle stavebnicí nedal rovnat, mnohem méně dílů a kvalita nic moc. Tahle stavebnice vypadá mnohem líp.
You are simply the best! A Master... awsome to learn with you! Thanks for it
Thank you for sharing. I built may warplanes from ww2 when I was young, and I have been thinking to start up and build models again. - The way you do / and have done all this work, and the superdetailed paint work is absolute awesome. - With great thanks to you, I will buy me a Junker 88, and other planes and Models, and try to build it like you have done. Also try to do the paintwork in detail and do it the way that you have shown. - Beautiful work you have done : ) - Thank you for sharing how to do you Master : ) Best greetings from Norway. Ole : )
Great job on the cockpit and nicely edited video with cool music! : )
OMG that cockpit detail is out of this world
I have this kit to make, and I cannot wait to start it after seeing this!
Wow these tutorials are as well-constructed as the kits!
Congrats !! a fantastic job, gonna follow your steps and wish I could get the same results. Josep Barcelona
My wife even say down with me to watch this build with me. She has no interest in modeling, but she was even amazed at your skills!
Very well executed build log. Good video with thorough captioning. Cockpit detailing and painting turned out marvelously.
Bill.
the level of awesomeness contained in this video is too much for 12 people
Impressionnant 👍👍👍👍
Super travail 👍👍👍👍
Félicitations 👍👍👍❤️
Great build and Great music
Absolute awesome : ) Thank you for sharing. Best greetings from Norway : )
love your work..very easy to follow..im starting this build soon...? whats the purpose of sanding after the primer is layed down
Another question, could you make a demo how to mask canopies of this model? I'd appreciate it
Top Work, I enjoyed watching it, thank you
Шикарная модель...тоже такую купил.😮
Great work...
please be so kind and answer for me to the followings question:
- what pressure do you use when spray Gunze surfacer 1200
- what gritt is the sanding paper when you sanding the surfacer?
kindly,
George
GREAT work. I have this in my stash and you are really encouraging me to get it out and try it. May I ask though, did you remove the two rearward facing guns after undercoating?
Hello Martin... you are a awsome modeller... can i ask you were you get those plans that you use to rescribe the model? Thanks
The cockpit was amazing!
Beautiful work as usual David. Just one question; After applying Surfacer and sanding, how do you remove all the dust for the next paint coats? Do you just brush it off or rinse the model in something?
I have the 1/35 modell. It is so much work!!!
pekna praca, dobre sa to pozera, co to mas prosim ta za stetce ktorymi malujes kokpit (biela farba) tie tenke s drevennou ruckou ? v 3 minute +/-. Diky za odpoved
Thanks for sharing your work! Big fan here..cheers from Canada!!!
Great Work Mate . keep going I really enjoy watching you crafting and i cant w8 for part 2 :)
well done, i´m building the same kit at the moment, can you please place a link for the riveting blueprint?
I see you use tamiya extra thin cement to glue the canopies. The vapors of glue does not blurs the clear parts?
Excellent job so far Martin, cockpit look's super :-)
Great job dude! I shared your channel in my facebook page and I got some questions about these models.What are you doing to those models after made up them?Are you hiding them or selling them?
Awesome work!!! You sir are a model master! :)
And there you have a video about: Junkers Ju-87 «Stuka» PLASMO - plastic models (Ju-87 "Sturzkampfflugzeug")?
MrBADENWEILER Ju88 -_-
Is there a list that shows the used materials in every step of this build/video?. Thanks!
EFX1969 if you turn on captions there is
So what do you think about Revell... I see you do Revell the least ... i do revell all the time because its only thing that we have in Croatia and.... Its not my fav Company
Hi David, I have a question...
When you put a gloss coat, how long your waiting before you move on with next step(wash, weathering etc.).
Thanks.
Hi there . I was wondering Electric drill you used to drill holes , looks like a good idea :-)
may I ask an obvious question? You demonstrate that oil based paints can be used with acrylics?? any issues at all with using them together?
How do you choose what types and when to use them please?? love your attention to detail! Thanks
+Ron Bishop Here is video about washes. th-cam.com/video/FXerpuOthXk/w-d-xo.html
+PLASMO - plastic models
Thank you for your prompt reply-essentially you need an acrylic gloss coat when using an oil based wash-otherwise the solvents used to remove the excess wash will affect the gloss coat? Have you had any issues with a gloss coat applied to an acrylic undercoat for example? sorry to labour the point on this-thanks in advance Regards
Yes, you will need gloss surface before applying washes. If you use acrylic varnish and x-20 thinner for oil paints you will no problem.
+PLASMO - plastic models
once again thank you for your assistance-wish me luck with the washes!!
I do OK with the pencil detailing of panel lines...
Wow that looks amazing!!!
why do you rub the primer off?
by the way these videos are great and you should keep up the fantastic work!
***** aaaaaah thank you ill be sure to do that
btw the cockpit looks amazing!
That`s because Revell made an amazing cockpit.
You sir, are the best.
How big is it? It looks a bit small for a bomber, should i get this or something like a 1:48 tamiya p-47D, or a 1:48 f-104 from hasegawa? I really dont know what to get, i have enough money to get 2 or 3 models and a few tools
onother master peace... but where do you download panelline patern for scale models?
bit late perhaps but seeing as it's glossy paper he highly likely bought or borrowed a book about the aircraft. Search around for books that contain (rivet) plans. For example, for an FW 190 project I found an aero detail book which also inclused some colour photos and such.
Great cutting Martin!
What brush are those when you where painting the cockpits. How did u wash them after painting one color?
do you have any suggestions for what brands/companies/makers to use?
Will you ever do armour kit videos?
Ahoj, veliká paráda jako vždy Martine. Můj dotaz je tentokrát na schéma letadel podle kterých nýtuješ modely. Kde to sháníš, prosím Tě ?
Díky
***** Děkuji pane, ať se daří, těším se na pokračování ! ;-)
ur work is awesome!
Quick question, what type of paint do you use? (Brand) and where do you purchase it from?
Great work, where i can get the plan for the rivets?
This is impressive.
Why prime with Mr. Surfacer ? And do the riveting after and not before?
What would you recommend to beginner modelers as a good starter kit to get into the hobby?
aforce66 By the way, your cockpit looks absolutely beautiful.
Hi Plasmo nice Models, what for brush do you use on 2:55 (manufacturer)
Maximan6877 idk tamiya or something, it says tamiya in the caption
Great job!
Did you use pe for the cockpit at all. The radio faces I can't tell?
I wish Revell would give their vintage paper instructions a makeover.
They did, I bought the 1/48 Mosquito and the instructions are in full color and much clearer.
They also Made them for this kit I got it with 80 years battle of birtain set
Martin, are those called "blunt end" brushes?
Hey Plasmo! I was wondering in the cockpit did you use any resin or is that all kit detail?
:-D I did not use any resin or upgrade parts. All details are in the kit.
Awesome, nice kit then! I might pick one up and make a Finnish version of it. But shall I make a video of it?
Why not? I will be very glad if you will do video.
I'll look into it after my current project: I'm not sure if you'll remember, I dared you to try an old tool airfix kit. As I recall you declined haha, but I picked up an old tool 1/72 airfix Mosquito. I managed to bag some CMK resin goodies for Hasegawa and Tamiya mosquitos. Plus with a bit of scratch building, I'm gonna attempt to make it half way acceptable! I'm videoing it but I'm not sure how to present it. Step by step videos, like one for the nose guns, then one for the engines, etc or just one long video? In your experience what is better received by the modellers here on TH-cam?
Cheers Plasmo :D
I do not know. Many parts video is worst then one part video and it must be short too. Max is 15 minutes. I know it is impossible to present a model in 15 minutes but they are more successful then long videos. Just my opinion and statistics.
I just started to build the revell ju 88 c6 z/n on the same scale and it doesn't have that amount of detail :(
parádna prácička :)
i hope that one day i can make a cockpit as this one T_T
Prosím dáte mi stránky kde ste koupil WASH??
Ahoj Plasmo chtěl bych se zeptat co to máš za štětec na detaili. Díky za odpověď
Ahoj Honzo. Zrovna v tomto videu používám obyčejný tamiyacký kulatý štětec malý. Jen pro orientaci, tak tady je link. Má syntetické štětinky, ale je docela odolný a levný.
www.mpmshop.cz/naradi/stetce/tamiya/tamiya-87017.html
Já teď na detaily používám hf štětec kulatý ultra. Sice je dražší, ale je fakt ultra tenký. www.mpmshop.cz/naradi/stetce/tamiya/hf-tatec-kulat-ultra.html
How much money do you spend on making dioramas
I got ZEVEDA kit and it includes 4 pilots :)
Where did u get that glue gun and what is it called....ANYONE?
What You used to do this crazy belts? :D
I used an aluminium sheet and cut strips from it.
+PLASMO - plastic models Oh, so easy but looks so cool and realistic. Thanks! :D
I have the Junkers 52 Model i Love it
how do u the lines in the plane and what wah did u use for the cockpit?
+Piet Puk Tamiya panel wash
what's the purpose of spraying on the surfacer 1200? is that a primer?
+Christopher Joiner Yes, it is primer and unify surface. You can easily see scratches or other damage on surface.
+PLASMO - plastic models cool. tks.
Did you use PE for the seatbelts, or did they come with the kit?
I made them from aluminum foil.
Ok thanks!
How did you paint the gauges
can u tell me please of all u washes for this project? please
+Piet Puk Here it is th-cam.com/video/FXerpuOthXk/w-d-xo.html Oil, enamel and acrylic washes.
Would anyone reccomend this kit?
Paráda...
How much was that kite
Hog big is it in cm nose to tail?
😍 cool
can you made stuka
Is this the Hasegawa kit ?
No Revell
thanks
Just bought this kit looks like a major filler job!
Looks like funny
Ahem.........you do know this is 1/72 scale, right?
Can anyone recommend some good glue
oGxMaXiiMuMZz
GID
Chin Chin The Dark Lord
Gud Glu
#makemodelkitsgreatagain
Tiez uvazujem o junkersovy ale v 1/48
No offense but why not narrate your video's ? I have a good feeling you do not respond to new modelers with questions?
Co bych dal za to byt takový frajer a ne patlal :/
Kdysi jsem měl Ju-88 A taky od Revellu, ale ten se s touhle stavebnicí nedal rovnat, mnohem méně dílů a kvalita nic moc. Tahle stavebnice vypadá mnohem líp.
good video but terrible choice of music
this SbS sucks.
Give a video model with Kawasaki ki 45 toryu for hesegava
did you use dark brown or black panel line for cockpit?
+Fran Kljajic I used black panel line wash.