Ok, a couple of things wrong with this video. The torque wrench does not tighten up to 400nm according to the box. Half the numbers were covered up, but the highest number I could see on the box was 338nm (not 400). Secondly, he covered up the numbers on the brand new torque wrench so we don’t know what he set it at. I’m thinking somewhere around 250nm. Thirdly, there’s no way he can tighten up to 400nm in that position lifting upward the way he was. He’d need to push downward with a lot of force. Fourth, why was he backing the nuts off, then re-tightening? Clouded in strangeness this video. Clouded indeed.
1st you didn't tighten them to 400nm we didn't see the settings and you didn't let the torque wrench click... Second why are you weirdly tighten and the loosen the nut with a torque wrench???
he just bought the torque wrench, probably the first time he's used one with these things from aliexpress you should go in hoping they are 25% of rated capacity, weather it's rated in watts, lumen, amp hours or nm, doesn't matter... if you are getting over 25% capacity then it's probably what you can expect, if you are really luck it'll hit 50%
Ok, a couple of things wrong with this video. The torque wrench does not tighten up to 400nm according to the box. Half the numbers were covered up, but the highest number I could see on the box was 338nm (not 400). Secondly, he covered up the numbers on the brand new torque wrench so we don’t know what he set it at. I’m thinking somewhere around 250nm. Thirdly, there’s no way he can tighten up to 400nm in that position lifting upward the way he was. He’d need to push downward with a lot of force. Fourth, why was he backing the nuts off, then re-tightening? Clouded in strangeness this video. Clouded indeed.
1st you didn't tighten them to 400nm we didn't see the settings and you didn't let the torque wrench click... Second why are you weirdly tighten and the loosen the nut with a torque wrench???
he just bought the torque wrench, probably the first time he's used one
with these things from aliexpress you should go in hoping they are 25% of rated capacity, weather it's rated in watts, lumen, amp hours or nm, doesn't matter... if you are getting over 25% capacity then it's probably what you can expect, if you are really luck it'll hit 50%
He thinks we are fools🤣
Never tighten wheel nuts to 400nm, usually spec is 120nm, you will damage threads!
Did this guy just try clipping on a battery to a battery? Yea, I seen that. L
Uses a torque wrench, says more or less 400. Hahahaha.
I knew he was about to lie when I seen how he was carrying the battery.
No clue at all
is it good for occasional work!?
i just order this same from aliexpress for 68$ with battery&charger and shipment!!
Such a strange guy. He said that set 400NM 😆
🤭.
😂😂😂😂😂😂