Hello, please advise before purchasing. What to choose? Kia Carnival II Gasoline 2.7 G6EA - very rare on sale, 2% of all offers Diesel 2.2 D4HB - began to be installed in 2010, can be found on sale (I'm thinking of buying this one) Diesel 2.9 CRDI + dolphin - everyone speaks of it as the most problematic engine, 90% of sales with this engine or even watch Renault Espace IV 2010 F4R 896; F4R 897 2l petrol Thank you!
sir pinanood ko now ang vlog mo "How to Engine assemble Hyundai Santa Fe , ask po how much cost po pag magpa over haul sa 2005 model po ? ang case po ng hyundai santa fe is bigla po mamatayan ng power , pero mga 30 minutes or mahigit po pag e start mag andar po ulit ... Ano po ba ang dapat ayosin po , ... hoping po na ma advise-san mo ako po ...salamat more power sa vlog mo po ...
Hello Very good video. I want to know if you can share the tightening settings of a 2012 Santa Fe CM FL 2.2 CRDI GLS 2WD engine ENGINE: D4HBBU533906. THANK YOU.
I have a Hyundai Santa Fe 6 cylinder and I took out the engine and removed the lifter bucket from the head without marking it. Please tell me an easy way to put the lifter back in the correct place and the valve lifter clearance is also correct.
Kapatid, matanong lang po kung bakit nyo inoverhaul ung makina? Kasi may customer kami n nagpapalit ng timing chain kasi medyo maingay ung makina kaso ganun pa rin pagkatapos namin palitan ung timing chain.tnx
@@themechanictvchannel ty po...b4 ko binuksan sa ilalim, may maingay na knocking sound dati,...ok yung main bearing, na rod bearing ako, 1 & 3, medyo damage yung crankshaft journal, niliha ko lng 320 - 1000 tpus metal polish, DIY...pinalitan ko yung 4 ng same class A, blue color marking , pasok naman sa oil clearange nung ginamitan ko ng plastic gauge...bumalik agad yung ingay sir, walang trouble code...malamang na bearing ulit...baba na ba buong makina para ma check lahat?? anu maipapayo nyo Sir??? salamat
@@dennisdesalit5430 meron sir i timing mo muna sa timing chain setting pag bukas mo ng oil pan makikita mo sa gitna ng balancer assy may butas tusukin mo pag naka center na ilapat mo na sa gear ng crankshaft..
Mechanics are the coolest people in the world
Very informative content keep sharing sir..
Good job keep sharing
Good job
Keep sharing
Good job pare
very well done....keep it up !
Good job sir
Goodjod sir,
the best mechanic
thank you...for support sir
Nice keep sharing sir
check cable sir
Galing bihira ang talent na yan😊
thank you..
very good👍
Thank you very much
Very nice info ..
good job pare
Very good video. Thank you for sharing. Can you recommend where I can purchase parts for this engine?
nice
Goodjob sir. Godbless😇
well done brother can you do one for the Tucson diesel 2006 God Bless
good job Sir, Godbless!
Hello sir, can you please advice if there is timing setting for the balance shaft? What position it should be fitted on to be zero?
u set tdc first den u put a mark on a gear one thing they have small hole to put tools
الله يبارك
Consulta el torque es de la culata es de 79nm no lo escuché bien
👌👌👌
PA SHOUT OUT PO IDOL
YOUNGGUNS44 TV ... Master SAURO'S AutoWorkz..
Hello, please advise before purchasing. What to choose?
Kia Carnival II
Gasoline 2.7 G6EA - very rare on sale, 2% of all offers
Diesel 2.2 D4HB - began to be installed in 2010, can be found on sale (I'm thinking of buying this one)
Diesel 2.9 CRDI + dolphin - everyone speaks of it as the most problematic engine, 90% of sales with this engine
or even watch Renault Espace IV 2010 F4R 896; F4R 897 2l petrol
Thank you!
I trust you made the right decision and went for the 2.2. Lovely engine.
Hi your video have mirror effect on it shows you tighting bolt anticlock wise and every thing is oppsite.
sorry sir i use front camera
boss ilan torque mo sa camshaft cap?
sir pinanood ko now ang vlog mo "How to Engine assemble Hyundai Santa Fe , ask po how much cost po pag magpa over haul sa 2005 model po ? ang case po ng hyundai santa fe is bigla po mamatayan ng power , pero mga 30 minutes or mahigit po pag e start mag andar po ulit ...
Ano po ba ang dapat ayosin po , ...
hoping po na ma advise-san mo ako po ...salamat
more power sa vlog mo po ...
check mo muna fuel filter or kung may fuel pump ehh posible un ang problema
Great motor everything the nissan yd25 was not.
Thank you.
You're welcome!
Hello Very good video. I want to know if you can share the tightening settings of a 2012 Santa Fe CM FL 2.2 CRDI GLS 2WD engine
ENGINE: D4HBBU533906.
THANK YOU.
thank you pare
Pahingi ng torque ng specs ng crank con rod at head.tnx
Diba boss parang may balancer pa iyang oil pump kailangan i timing iyan e
Can you please advice as didn't see the second time if was or not. Cylinder head, was it 49 NM + 120 +120? OR JUST 49 NM + 120? THANKS
49 120
I have a Hyundai Santa Fe 6 cylinder and I took out the engine and removed the lifter bucket from the head without marking it. Please tell me an easy way to put the lifter back in the correct place and the valve lifter clearance is also correct.
better you to machine shop to determin what clearance intake and exhaust
@@themechanictvchannel
I will do.
Thank you
hi sir. saan po ba ang shop nyo magkano po ang
magpa overhaul ng hyundai santa fe 2007 blowby na po
depende po sa location at sa gagawa at sa parts
Sir itNong ko lang kung mag ka pareho Ang engine block at cylinder head Ng D4Hb at D4CB?
same lang crdi
kasi naghahanap ako ng nag overhaul ng 2007 hyundai santa fe blowby po
san po ba location nyo baka may marecominda ako sa inyo
Sir.. anong thickness ang gasket head po? Since may tatlong types T=1.2 or 1.3 or 1.4?
1.3
Video esta al revés???
Good day po idol saan po banda ang shop ninyo idol? Mabuhay ka idol👍🚖
Ay sir sa malaysia po ako share lang po ng mga basic idea..
Hello, can you tell me. Is it possible to re-glue the plate without removing the engine. Oil leak in the area of the oil pump
posible sir but many parts u can give way to proceed that kind of work..
@@themechanictvchannel thanks for the information
Yağ pompası sentesi nedir? Ustam
Lakas pong ng engine na yan gamit ng sta fe.
yes tama ka sir
Boss baka may marecommend po na sing galing nyo gumawa dito po sa pinas,
meron sir san loc mo at anu issue at unit
can you please write the torque data of the timing chain bolts, because I do nott understand your language
10mm 10 to 15newton meter 12mm 22 to 26 nm
Kapatid, matanong lang po kung bakit nyo inoverhaul ung makina? Kasi may customer kami n nagpapalit ng timing chain kasi medyo maingay ung makina kaso ganun pa rin pagkatapos namin palitan ung timing chain.tnx
humalo ung oil sa cooling system sir kaya inoverhaul ko na
One time 120 degree or two times ?
1 time
Good day sir. Isang 120 degrees lng po ba?
yes sir
Hi mate! What's the torque for camshaft and timing please? Thank you!
you already watch the video sir...
Yes I did but I didn't get the torque for the camshaft!
No details for camshaft torque?..
magkano po sa yo labor cost sa ganyang makina sir?pm nyo po sa akin salamat.nice work
hehe sir iba po kc labor charge d2 sa malayasia at iba ung labor na kinukuha nila dyan sa pinas
how the bolts are tightened counterclockwise? tnx
no that is from camera i use front camera
sir ask lang po ilan ang torque ng injector holder bolt?
26nm sir
Hello sir. 79nm + 120 + +120? Or pwede po isang 120 lang?
Ano po recommend n'yo?
Head bolts po
120 lang
I have a 2.4L Hyundai Sante fe where are you located at how do I contact you?2018
i work here in malaysia
Ok
какие моменты затяжки болтов цепей?
I have a doubt,oil pump don't need binding?
no need
@@themechanictvchannel you mean that there is no timing mark for the oil pump balancer?
@@ch4r13589 have a timing locate at top have small hole
Sir, pwede pa service? Hyundai Santa Fe 2013, starts but namamatayan after few minutes.
Sir, patulong location ng Crankshaft position sensor.
sa may intake side between engine and trans underneath
what torque spec for cam cap bearings
what bolt size 10mm?
Sir yong 120degrees pag sa foot pounds ba o sa n.m ilan bayan...salamat
hindi macalculate sir ang 90 degrees sa nm or ft unless direct torque ka sumusunod kc ako sa standard procedure kaya may 90 degrees pa
Di ba sir nag 78degree ka then saka ka nag mark ng bolt then nag imaginary ka ng rotation to create a 120° torque
Sir ano po nilagay nyo sa headgasket? Salamat po
manipis na rubber grease lang pero kahit wala ka na ilagay basta original ok lang
sir ano pong torque ng bolts ng egr assembly?
30nm
Santafee oil pump price
general overhaul?
yes sir
saan po ang shop nyo?
ahh work ako sa malaysia sir
bat sa manual boss is 79nm+120+120? head torque
Sir tama ba? 79nm plus 120+120?
kuya, anu torque nung oil pump balance shaft ba yun
?? tnx
lagyan mo ng 38nm sir
@@themechanictvchannel ty po...b4 ko binuksan sa ilalim, may maingay na knocking sound dati,...ok yung main bearing, na rod bearing ako, 1 & 3, medyo damage yung crankshaft journal, niliha ko lng 320 - 1000 tpus metal polish, DIY...pinalitan ko yung 4 ng same class A, blue color marking , pasok naman sa oil clearange nung ginamitan ko ng plastic gauge...bumalik agad yung ingay sir, walang trouble code...malamang na bearing ulit...baba na ba buong makina para ma check lahat?? anu maipapayo nyo Sir??? salamat
@@dennisdesalit5430 diagnose mo maihi sir kung san galing ung ingay...mahirap naman kung ibaba agad or sure ka ba sa timing ng balancer mo sir
@@themechanictvchannel ty..yun ang hindi ko na check...may timing din pala yun...maraming salamat sir...buksan ko ulit
@@dennisdesalit5430 meron sir i timing mo muna sa timing chain setting pag bukas mo ng oil pan makikita mo sa gitna ng balancer assy may butas tusukin mo pag naka center na ilapat mo na sa gear ng crankshaft..
oil pump timing not showing
upper part of the oil pump have slot just put in a center done
mirror video not good
يجب عليك شد برغي طرنبه المازوت
BARVOOO
Dapat ipa kita ninyo
Но про метки, ни про моменьт затяжки, да ещё и на старых башмаках с цепями. Отстой... 👎
It should be renamed Santa Fail, Timing chain snapped at 200kkm.
Can you upload this not in mirror image please?
what do you mean upload alrteady upload
keep sharing
Good job pare
Good job Sir
Hi can you remove the oil pump without removing the engine? Does it just need the gearbox and lower casing removing?
yes
@@themechanictvchannel thank you. Do you need to take any belts/chains off too?
Good job pare
thank you pare
Good job pare
Good job sir