Maybe get someone who isn't scared of the machine, to do this demonstration. Seriously, either of these cutters will ravish a stump, if they are actually in contact with it. The greenteeth do take a bit of a bigger bite, so they do cut faster, but the finger style teeth do a pretty good job too, when they are sharp. On the downside of the finger style; if you chip it or break it, you replace it, period. I've used both, and the main difference I found to be, greenteeth cut better and are easily replaced without replacing the entire holder.
hi good morning whats the amount of pockets teeth and bolts needed for this stump grinder there is a video saying that we need g angled pocket, 3 straight, 8 teeth and about 12 bolts.
I'm fairly new to using my kolher stump grinder but i have to say the finger style of blades is disappointing. I cut 3 smaller pines (1 foot in diameter) and a decent oak(28 inches) and the blades are DONE. Bought some greenteeth and am waiting for them to come in.
If you purchased our Power King Stump Grinder after June 2020, then it should already be compatible and would have the holes to except the Green Teeth Pockets. If you have any additional questions, please contact us at 1-800-344-3371 or Support@QVTools.com.
Maybe get someone who isn't scared of the machine, to do this demonstration. Seriously, either of these cutters will ravish a stump, if they are actually in contact with it. The greenteeth do take a bit of a bigger bite, so they do cut faster, but the finger style teeth do a pretty good job too, when they are sharp. On the downside of the finger style; if you chip it or break it, you replace it, period. I've used both, and the main difference I found to be, greenteeth cut better and are easily replaced without replacing the entire holder.
👌👌👌You nailed it. I just purchased this machine and blew thru the teeth on one job. They do work good, but turn to paper weights pretty quick
I like how you can obviously tell they were barely working the green teeth.
would this kit work on a DK2 OPG777 stump grinder?
hi good morning whats the amount of pockets teeth and bolts needed for this stump grinder there is a video saying that we need g angled pocket, 3 straight, 8 teeth and about 12 bolts.
When changing the green teeth does it reduce the over diameter of the wheel. The teeth look like they don’t stick out ass far ass the factory teeth.
I'm fairly new to using my kolher stump grinder but i have to say the finger style of blades is disappointing. I cut 3 smaller pines (1 foot in diameter) and a decent oak(28 inches) and the blades are DONE. Bought some greenteeth and am waiting for them to come in.
Will it the green teeth setup work on the 14inch wheel from powerking
Did you use the same wheel ? Did you have to modify the holes for the green teeth ?
If you purchased our Power King Stump Grinder after June 2020, then it should already be compatible and would have the holes to except the Green Teeth Pockets. If you have any additional questions, please contact us at 1-800-344-3371 or Support@QVTools.com.
Never understand why people don't use the chainsaw to cut it as low as you can...so much easier not to have to grind that extra material.
Power King Stump Grinder Vs 3 Foot Stump on a Hill!!
th-cam.com/video/gV-77MRbTwA/w-d-xo.html
Absolutely zero questions answered..video needs to come down
Power King Stump Grinder Vs 3 Foot Stump on a Hill!!
th-cam.com/video/gV-77MRbTwA/w-d-xo.html