See this following video of programing the remote start to the truck. You need to turn on a module in the computer for the remote start to work. th-cam.com/video/ZWp3De4Gwg0/w-d-xo.htmlsi=leiGu8hyl9KvGaER
I’ve got this model on my 2011 F150, my wife insisted the dealer install it. Well, it never worked 100% of the time, at best 80%, and if I knew it was this easy I’d have done it. Also, the reason I’m here is because it’s likely shorted out my security system. Thanks for the vid, now I know how to remove it and throw it away!
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html Full tutorial on how to install and program to vehicle. Not sure if this will help In your scenario but it might. Hope you get er sorted out. Thanks for watching
no i picked it up off ebay. I purchased from Fairway Ford on eBay years ago. I see there is another seller selling at a cheaper rate out of california. search on ebay but not sure if that seller is oe or aftermarket. my kit came with ford logos on all pieces
My truck has a factory oem remote start kit installed but I don't have the key fob that has the remote start button, do I have to order a key from ford or can I get a cheaper one from Amazon and have them cut and program it?
Hello brother.. It has not been tested on the Ford Raptor. I sold the car before trying it and now I offered it for sale, but someone bought it from me, but the remote control was not programmed on his car because his Gulf car depends on the frequency 315 and it turns out that the remote control has a frequency of 433 MHz, is there a way to convert the frequency Car remote control from 433 to 315?
Here is a link of showing how to program and turn on the remote start module in the 2011 f150 th-cam.com/video/ZWp3De4Gwg0/w-d-xo.htmlsi=t7y7wTQ5YI2CT6K7
I needed to turn on the module in the computer yes. Follow this youtube link to see how to turn on the module and program keys start to finish th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I am not sure of the procedure. You will need to do a key procedure. Assuming it is along the same lines as this procedure but with out the door locks. I would suggest googling the forums to see if all the codes are the same and procedure is the same. Forscan has a forum with a assortment of answered questions
@@patricksannicolas1241 should be able to find the procedure through forscan forums. Try year make model manual locks remote start forscan in a Google search and see if this will narrow it down for you
I am not sure how the standards work. I believe you have to tap into e brake switch along with a couple other things for the aftermarket setups. You should have a hood switch so it does not turn the engine on by mistake when working on it. I would suggest talking to your local remote start experts or having them do the job if not familiar.
Thank you very much for posting this video but did it work? I have a 2014 Ford F150 and want to install this feature in mine, just wanted to be sure everything worked fine afterwards.
Everything works fine in my 2011 f150 5.0L 4x4. You need to turn on the remote start module in the computer. See video link below for full details on how to turn on module and program keys to truck. th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I used the make and model of my truck and I believe it was fairway ford in Michigan? I'll need to double check when I get back to the PC as mobile wont let me see that far back
check out my other video for how to turn on your remote start module inside the truck and how to program the keys if you have not already, the video entry is the same but goes on into how to turn on the remote start module so things work. th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I purchased from fairwayfordparts on ebay. I see they no longer have the kit I purchased listed in there items for sale, im sure if you contacted them they might still have some or be able to get some.
Purchased off ebay. Fairway Ford. They have a few different listing. I had the keys cut at a local locksmith location where they cut keys. And I programed the vehicle myself. See my other video on how to install and program everything in the system for the 2011 f150 th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I made another video with step by step Information on how to install the remote start and how to turn on the remote start module yourself using your laptop and a elm327 obd2 to usb connector. Here is the video on start to finish. See the following link. I did not need to go to the dealer in the end. If they were to turn on the module and program the keys I am sure it would of been around the 100 to 200$ mark. th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
If you would like to know how to program and turn on the modules in the truck. See this youtube video. Thanks for watching th-cam.com/video/ZWp3De4Gwg0/w-d-xo.htmlsi=QmgLt71ilNEPv8Ee
No I do not know how to set it for first initial start. I do it by the remote. Push lock and start twice and it continues the runtime longer when running if I remember correctly. Haven't done it in a while
@@LUCAMTire @jason G Hi there guys, good video by the way. The only extra step on the setup is to enable the Remote Start settings to pull up options on your dash screen. For my 2013 F150 it was line 720-01-02 on the IPC Module. Middle numbers were switched from 4C0A to 4F0A. You would be able to adjust the Run Time, climate control setting. Hope that helps, it did for me.
@@drg0809 cool I believe the 2011 and 2013 have different clusters. I might be able to put the run time at a different interval but would not be able to adjust climate control there. Thanks for the intel though If you enjoyed this vide give it a like and subscribe to the channel. Thanks for watching and the extra information
ebay and at that time was around 300$ CAD to my door, pricing i believe has gone up. could be wrong. see my other video for complete install with programming. th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I did the installation on my 2013 f150 xlt and it only works once after I enabled it if I what it to work once again I have to disable/eneble but same only works once any ideas please on what it might be
@Hollywood Marine The only extra step on the setup is to enable the Remote Start settings to pull up options on your dash screen. For my 2013 F150 it was line 720-01-02 on the IPC Module. Middle numbers were switched from 4C0A to 4F0A. It enables it under Vehicle and than options ( I think) You would be able to adjust the Run Time, climate control setting. Hope that helps, it did for me.
I have a hood switch but it's not plugged into anything. I have the remote start button on my key but when I try to remote start it will just beep and flash the lights.
Off Ebay. Came from a ford dealer out of Michigan. They shipped to my door in canada. Was 3 to 400$ cheaper then purchasing it at my local ford dealer. Not sure where the direct Ebay link is now though.
You need to turn the remote start module on. I will send you the video link to all the steps. You need to push the lock button and then the start button twice
just got mine today, excited!!!!! in alabama its starting to get cooler here
See this following video of programing the remote start to the truck.
You need to turn on a module in the computer for the remote start to work.
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.htmlsi=leiGu8hyl9KvGaER
I’ve got this model on my 2011 F150, my wife insisted the dealer install it. Well, it never worked 100% of the time, at best 80%, and if I knew it was this easy I’d have done it. Also, the reason I’m here is because it’s likely shorted out my security system. Thanks for the vid, now I know how to remove it and throw it away!
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Full tutorial on how to install and program to vehicle.
Not sure if this will help In your scenario but it might.
Hope you get er sorted out.
Thanks for watching
Did your truck fail to turn over and display every warning imaginable as well? Mine did that a few days ago, I think this is the solution
Great video. Anyone else feel like they are listening to Jonny Depp from Fear and Loathing in Las Vegas doing a how to video?
hahaha nice
super easy simple videos. keep them coming
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Here is how you program it to your truck and turn on module within the computer
The best video on the subject thanks
No problem happy we could help
Do I need to buy the one with the keys if I already have 2 keys they don’t have the remote start button though
Do you have a LINK to the kit ???
no i picked it up off ebay.
I purchased from Fairway Ford on eBay years ago.
I see there is another seller selling at a cheaper rate out of california. search on ebay but not sure if that seller is oe or aftermarket. my kit came with ford logos on all pieces
My truck has a factory oem remote start kit installed but I don't have the key fob that has the remote start button, do I have to order a key from ford or can I get a cheaper one from Amazon and have them cut and program it?
i bought my kit off ebay. amazon will prolly have them to
Any ideas on why the climate control menu isn’t working once enabled I have a 2012 f150 xlt
not sure
Hello brother.. It has not been tested on the Ford Raptor. I sold the car before trying it and now I offered it for sale, but someone bought it from me, but the remote control was not programmed on his car because his Gulf car depends on the frequency 315 and it turns out that the remote control has a frequency of 433 MHz, is there a way to convert the frequency Car remote control from 433 to 315?
I do not think so. I belive It is in the chip set.
So you did not have to enable the remote start in the computer?
Here is a link of showing how to program and turn on the remote start module in the 2011 f150
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.htmlsi=t7y7wTQ5YI2CT6K7
You didn't have to unlock the truck computer? Just programed keys??
I needed to turn on the module in the computer yes.
Follow this youtube link to see how to turn on the module and program keys start to finish
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I have an f150 with manual door lock...will this work?
I am not sure of the procedure.
You will need to do a key procedure. Assuming it is along the same lines as this procedure but with out the door locks.
I would suggest googling the forums to see if all the codes are the same and procedure is the same. Forscan has a forum with a assortment of answered questions
@@LUCAMTire I appreciate your fast response. Hopefully someone has tried it out.
@@patricksannicolas1241 should be able to find the procedure through forscan forums.
Try year make model manual locks remote start forscan in a Google search and see if this will narrow it down for you
What kit did you buy?
Ford oe kit. ?
Do I have to install the hood switch? My car is Standard 2019, but where can I find this switch?
I am not sure how the standards work.
I believe you have to tap into e brake switch along with a couple other things for the aftermarket setups.
You should have a hood switch so it does not turn the engine on by mistake when working on it. I would suggest talking to your local remote start experts or having them do the job if not familiar.
@@LUCAMTire Thank you for your reply, brother.. I will check with the experienced ones. Greetings
Thank you very much for posting this video but did it work? I have a 2014 Ford F150 and want to install this feature in mine, just wanted to be sure everything worked fine afterwards.
Everything works fine in my 2011 f150 5.0L 4x4.
You need to turn on the remote start module in the computer.
See video link below for full details on how to turn on module and program keys to truck.
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Just curious which seller did you buy the kit from or what keywords to use. Cause I'm hoping I don't buy a replica set that isn't from Ford
I used the make and model of my truck and I believe it was fairway ford in Michigan? I'll need to double check when I get back to the PC as mobile wont let me see that far back
@@LUCAMTire thanks a ton brother 🙏🏼🙏🏼🙏🏼
check out my other video for how to turn on your remote start module inside the truck and how to program the keys if you have not already, the video entry is the same but goes on into how to turn on the remote start module so things work. th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I purchased from fairwayfordparts on ebay. I see they no longer have the kit I purchased listed in there items for sale, im sure if you contacted them they might still have some or be able to get some.
@@LUCAMTire thank you man 🙏🏽
Where and how much did you get keys cut and programmed
Purchased off ebay. Fairway Ford.
They have a few different listing.
I had the keys cut at a local locksmith location where they cut keys.
And I programed the vehicle myself.
See my other video on how to install and program everything in the system for the 2011 f150
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Did you have to get keys cut from the Dealer?
no i went to a company that cut keys, dealer wanted way to much money
Do you have to have 2 key fob with 4 button I did the installation on my truck but I only did one normal key and one 2x key
I have 2x 3 button keys and 2x 4 button keys with remote start
@@LUCAMTire my key has 2x and a trunk does that make a difference?
Do you happen to have the part numbers for each of the parts?
No sorry
What did the dealership charge to cut/program and unlock the remote start feature?
I made another video with step by step Information on how to install the remote start and how to turn on the remote start module yourself using your laptop and a elm327 obd2 to usb connector.
Here is the video on start to finish. See the following link.
I did not need to go to the dealer in the end. If they were to turn on the module and program the keys I am sure it would of been around the 100 to 200$ mark.
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
I had a local key business cut my keys. Had 2 keys cut for around 20$ and did the rest myself.
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Yes that was Great I took a screen shot and Printed it
Thanks Man@@LUCAMTire
Did you have to use forscan to reprogram the truck?
Full video on start to finish
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Thank you
If you would like to know how to program and turn on the modules in the truck. See this youtube video.
Thanks for watching
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.htmlsi=QmgLt71ilNEPv8Ee
Did you not have to use ForScan ?
Here is full video with forscan
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Hey, works great, do you know how to set the run time of the remote start?
No I do not know how to set it for first initial start.
I do it by the remote.
Push lock and start twice and it continues the runtime longer when running if I remember correctly. Haven't done it in a while
@@LUCAMTire @jason G Hi there guys, good video by the way. The only extra step on the setup is to enable the Remote Start settings to pull up options on your dash screen. For my 2013 F150 it was line 720-01-02 on the IPC Module. Middle numbers were switched from 4C0A to 4F0A. You would be able to adjust the Run Time, climate control setting. Hope that helps, it did for me.
@@drg0809 cool
I believe the 2011 and 2013 have different clusters.
I might be able to put the run time at a different interval but would not be able to adjust climate control there.
Thanks for the intel though
If you enjoyed this vide give it a like and subscribe to the channel.
Thanks for watching and the extra information
@@drg0809 how would you do that
@@ocielmoreno951 ForScan under IPC Module and change the line I mentioned. It will enable the settings on the dash cluster
How much was it? Where did you get it?
ebay and at that time was around 300$ CAD to my door, pricing i believe has gone up. could be wrong.
see my other video for complete install with programming.
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
Anyone know if this will work on 2013 explorer? If not, is there a similar install someone can point me to?
I did the installation on my 2013 f150 xlt and it only works once after I enabled it if I what it to work once again I have to disable/eneble but same only works once any ideas please on what it might be
I seen a different install vid and the guy used forscan to turn on the remote start on.
Gotta use forscan or take it to a dealer to be programmed
Where did you order this kit?
Ebay. I got the same kit for my 2014 f150. I got it from fairway ford. Paid like $239ish for it. Or you can get it with one key for $139 I beleive.
How well does the heat/ac settings work with the remote start?
Set the heat before jumping out of the truck and works good. A/C I am not sure. Not sure if ac turns on in remote start mode.
@Hollywood Marine The only extra step on the setup is to enable the Remote Start settings to pull up options on your dash screen. For my 2013 F150 it was line 720-01-02 on the IPC Module. Middle numbers were switched from 4C0A to 4F0A. It enables it under Vehicle and than options ( I think) You would be able to adjust the Run Time, climate control setting. Hope that helps, it did for me.
I have a hood switch but it's not plugged into anything. I have the remote start button on my key but when I try to remote start it will just beep and flash the lights.
Thanks man
I have a program video as well if you need it programmed.
And your welcome
Where do you buy it
Off Ebay.
Came from a ford dealer out of Michigan. They shipped to my door in canada.
Was 3 to 400$ cheaper then purchasing it at my local ford dealer.
Not sure where the direct Ebay link is now though.
Is this on Amazon
I found it in ebay
I bought mine but for some reason it doesn't start any of you can help me
You need to turn the remote start module on.
I will send you the video link to all the steps.
You need to push the lock button and then the start button twice
th-cam.com/video/ZWp3De4Gwg0/w-d-xo.html
What is the part number for this product
I'm not 100% sure.
I bought it through fairway ford.
They have some adds on eBay. Is where I purchased.
I am confuse isn't that a remote antenna
It is an antenna for the remote start system yes.