Reminds me of my childhood with my cousins and the stuff we got in all the time, glad you guys out having fun. Be safe and boat like you know your parents love you. Uncle Wayne
I think its really cool to see different types of projects come to the channel and not just go karts a and dirt bike anymore also you give people a chance to learn how to work on engines and similar things
Good luck guys... That old boat will have rotten floors. Those old Chrysler outboards will continue to break, but this is the best way to learn a trade. Keep wrenching. Remember there are no fails if you learn things along the way.
Get the carbs cleaned out. See if it starts. If it does run replace the water pump, its only a few dollars. When you replacing waterpump make sure to replace lower unit gear oil. Your pretty good with carbs so you should be good.
thats pretty cool, my dad (i'm 15) picked up an 17ft 89' capri last year for only $700 and we laid down some new carpet, patched some seats, put on a bimini and it is one hell of a boat for the price. it only has one issue, and that is with the Force 85hp (idk much about motors), it would always stall out when we put it into gear. We found a fix though, we just let the engine idle and warm up in neutral for about 2-5mins and then put it into gear. Once put into gear once, theres no issues shifting for the rest of the day. There also was another issue i just remembered however it seems to have fixed itserf after the first couple of times taking the boat out, and that was we had to constantly squeeze the fuel line bulb until it was firm while starting, however, it starts up on the third or fourth crank with no fuel line assistance now. besides that, lifting and lowering the motor we have a jimmy rig set up where i pull a tiny wire from the back right seat that releases the motor and it can be moved up and down. (i'm not sure how it works cause my dad set it up, as he did most of the boat. i was in charge of stuff like measuring carpet, waxing and polishing the exterior, etc etc.) anyways good luck to you guys and have fun.
Ok new boat owner here, I just bought one and am dealing with a 3 crab issue. A tip is all the jets are brass and will brake off VERY easy and you wont be able to remove them very easy... Happen to me yesterday when i took my carbs off my 1989 3 cylinder yamaha 2 stroke. be careful
Following I have a force and I know the motors in side and out . First thing squirt WD-40 in each cylinder befor starting . Check compression second. Drain all gas out of the gas tank. Mix 50 to 1. And dont forget to hook up the water befor starting.👍
Definitely keep the boat on the channel I don't care what you get, like you said if it has an engine you will work on it. I like the variety Migs keep it up.
I love watching people do project boats. There seems to be a lot of Bayliners out there from the 1980s and 90s era. Look for the stringers being rotten , decks being rotten and The transom being rotten. All repairable but lots of work
Those boats were built in Kingman Arizona by a friend of mine who had a full-time job there and went to high School it's cool to see those old boat still running good luck on your adventure young man just take your time those engines aren't that complicated
i think i saw a couple blisters on the hull amungst the barnacles. they are the things that look like bubbles in the fiberglass. piece of cake to fix. cut around them with angle grinder just deep enough to pop the bubble off sand it and if its not too deep just throw a thin layer of fiberblass over it thick on the resin and let it ride. if you dont plan to keep it in the water though, i would just leave it like it is but it is a fun way to kill some time on a saturday afternoon.
I just picked up a 79 , 16' Mark Twain .. I know nothing about boats , but managed to get the engine to turn over and fix some electrical .. But im stuck , Im not getting spark and know nothing about the points setup (way before my time) ... Good luck , they are interesting and finicky toys ..
I’ve actually thought about buying a project boat because i know alot about boats but i don’t have anywhere to have it... I’m really happy you got a boat! Also, that’s a really nice project boat! I can’t believe you got it for free
I like how migs is changing things up like how it used to be just dirt bikes and quad now it's quads dirt bikes car trucks and boats
Starting to sound like carsandcamras
Young kids with mommies money
I have been watching him since 10k subs
Yes
im a marine mechanic so this will be very interesting to watch and see how he does things
James Favaloro I’m not mechanic but I’ve done a lot of outboard work and I too am quite interested.
PTB same
Haven’t done a lot but enough to know about them
Hi
The only thing more expensive than a cheap boat, is a free boat.
Reminds me of my childhood with my cousins and the stuff we got in all the time, glad you guys out having fun.
Be safe and boat like you know your parents love you.
Uncle Wayne
I think its really cool to see different types of projects come to the channel and not just go karts a and dirt bike anymore also you give people a chance to learn how to work on engines and similar things
I'm liking the variety you have now😂
I do recommend you watch some of Andrew Camarats videos on jetskis and boats
He is a very knowledgeable guy
Andrew is a genius
this JUST MADE my day so much yayayaayayayay
Yes please do the project boat vids
Good luck guys... That old boat will have rotten floors. Those old Chrysler outboards will continue to break, but this is the best way to learn a trade. Keep wrenching. Remember there are no fails if you learn things along the way.
Man that boat is great
This is like the goonsquad channel but with things I could actually hope to one day attain
Get the carbs cleaned out. See if it starts. If it does run replace the water pump, its only a few dollars. When you replacing waterpump make sure to replace lower unit gear oil.
Your pretty good with carbs so you should be good.
thats pretty cool, my dad (i'm 15) picked up an 17ft 89' capri last year for only $700 and we laid down some new carpet, patched some seats, put on a bimini and it is one hell of a boat for the price. it only has one issue, and that is with the Force 85hp (idk much about motors), it would always stall out when we put it into gear. We found a fix though, we just let the engine idle and warm up in neutral for about 2-5mins and then put it into gear. Once put into gear once, theres no issues shifting for the rest of the day. There also was another issue i just remembered however it seems to have fixed itserf after the first couple of times taking the boat out, and that was we had to constantly squeeze the fuel line bulb until it was firm while starting, however, it starts up on the third or fourth crank with no fuel line assistance now. besides that, lifting and lowering the motor we have a jimmy rig set up where i pull a tiny wire from the back right seat that releases the motor and it can be moved up and down. (i'm not sure how it works cause my dad set it up, as he did most of the boat. i was in charge of stuff like measuring carpet, waxing and polishing the exterior, etc etc.) anyways good luck to you guys and have fun.
Who thinks migs needs a bigger truck like a 2500 Silverado
Nah he needs an f250
Ok new boat owner here, I just bought one and am dealing with a 3 crab issue. A tip is all the jets are brass and will brake off VERY easy and you wont be able to remove them very easy... Happen to me yesterday when i took my carbs off my 1989 3 cylinder yamaha 2 stroke. be careful
Following I have a force and I know the motors in side and out . First thing squirt WD-40 in each cylinder befor starting . Check compression second. Drain all gas out of the gas tank. Mix 50 to 1. And dont forget to hook up the water befor starting.👍
Love the boat video
Yes PROJECT BOAT!
Love to see a wider range of projects. Also you should have more vids like this with ur friends in them
Definitely keep the boat on the channel I don't care what you get, like you said if it has an engine you will work on it. I like the variety Migs keep it up.
Yes project boat give it a try!!!
Yes the boat
Would definitely like to see more on the BOAT AND VETTE......
Make sure you get a set of boat muffs so that you can put a water hose on it while trying to start it
mini bikes to a car and a boat good work migs keep working hard your succeeding we all see it your channel is growing very well
Check spark and carbs . Make sure water is connected when you run it and check for fuel pump
You guys are too much man. Have fun with that...look forward to following the build.
Yessir we want a project boat
Cool boat
I love watching people do project boats. There seems to be a lot of Bayliners out there from the 1980s and 90s era. Look for the stringers being rotten , decks being rotten and The transom being rotten. All repairable but lots of work
Go for it. It will bring viewers
Let's just send prayers to that jetski
It’s an awesome boat can’t wait to see it running
This will be a good series boat restoration. Maybe go fishing after
Yeah want to see!
I like to see it running and in the water. Good luck getting those barnacles off.
Those boats were built in Kingman Arizona by a friend of mine who had a full-time job there and went to high School it's cool to see those old boat still running good luck on your adventure young man just take your time those engines aren't that complicated
Yes please rebuild this boat
Cant wait for the washing video of it , i love those
I have the same boat and motor been through it. They will run and good too just a little love.
My first boat was a 32 fountain with no motors, liked that project.
I love all the old band shirts
I would love to see this boat to be a project
Keep doing more boat vlogs
That motor might give you a headache
ThatBoatGuy agreed. Force motors were built cheap. They are junk. I have never encountered a worse motor than a 1996 Force 40hp.
@@logankojetin3606 my 76 125 running strong. guess if you know how to take care of things they last
I have two and love them
Force motors are junk , just like Bayliner’s
I disagree, I ave two that have never let me down since new in 1992 and 1995, a 90 and a 120
Definitely I will like to see that boat project so do it please
i think i saw a couple blisters on the hull amungst the barnacles. they are the things that look like bubbles in the fiberglass. piece of cake to fix. cut around them with angle grinder just deep enough to pop the bubble off sand it and if its not too deep just throw a thin layer of fiberblass over it thick on the resin and let it ride. if you dont plan to keep it in the water though, i would just leave it like it is but it is a fun way to kill some time on a saturday afternoon.
Boat video would be cool.
NICE PROJECT !
Oh yeah, I would love to see you fix that Bayliner up.
Nice
Hell yea dude, its going to come out awesome for sure!!
Migs really do be branching out to cars and boats now sick!
You should keep doing this project
Nice shirt man🤘🤘😁
Yeah make more videos on it
Your videos are so entertaining and I love watching them
Yes on project boat maybe we can help with trouble shooting
Go ahead men! Another cool proyect to see.
Ye you should make the boat epic
Ya do the boat build
I would love to see this boat on the channel
Looks like it will be lots of fun.
Yess boats
ya ide love to see a boat project
Did you ever get this boat cleaned up and restored?
I have same boat,they are known for the floors rotting,do comp check,if. Bad haul away to junkyard
Im so excited to see how the boat turns out! Good luck Migs!
Bout time you uncover the pool
I just picked up a 79 , 16' Mark Twain .. I know nothing about boats , but managed to get the engine to turn over and fix some electrical .. But im stuck , Im not getting spark and know nothing about the points setup (way before my time) ... Good luck , they are interesting and finicky toys ..
I looooovw you vids you helped me fix so many quads
Good to see there isn’t a fuckin part 2
I have a 1988 Bayliner Capri 175, love the style and size, enjoy
If you need some parts for the tilt/trim parts hit up db electrical. They have good parts and decent price
Hell Ya on the project boat 👍🏽
Change the impeller in the foot of the the motor
B.O.A.T = Bust Out Another Thousand
Nice shirt
yes a project
Mings I love every single video that u make
I am totally impressed. I actually used to have the same boat.
Boat project always a great plan
That is the best tip ever I even tell that to roomie truckers
I’ve actually thought about buying a project boat because i know alot about boats but i don’t have anywhere to have it... I’m really happy you got a boat!
Also, that’s a really nice project boat! I can’t believe you got it for free
New sub from the UK. 👍🏻👊🏻
There is a screw for the tilt trim on the side that will release the pressure and it will go down by itself.
All 29 of them are Karen's migs good job changing it up would love to see u out there on the boat tubing and sking
Master of puppets is the best album
When’s this man gonna get a snowmobile project
0:02 Metallica! Nice!👍
Hell yeah the SS. Migs!
I’d love to see it run next video
We see you with that Metallica shirt
Yes side Project on his channel see it running and see it in the water
I want the boat to take over the nascart
That’s a 90s model mercury force outboard it looks like
Ya do it up
Thanks Mig
i would love for you to do a project boat please do a series
i bought this same boat jus about same time as you lol this crazy mine needs to be redone aswell been sitting like 15-20yrs.