Sometimes the adjustment of the switch will correct a failure. Loosen the two screws slightly. Adjust the switch until, truck cranks while in park or neutral and will not crank in drive, reverse and other drive positions. If this works the switch was not timed properly instead of having a bad switch. Tighten the bolts. I did this on my vehicle - it works fine as it was cracking while in reverse before the adjustment. Stoney COL (r)
we used to make those in rushford mn at trw they had an epoxy sealer where the wire connector goes and some had to replace the wiring harness then when it changed it had a silicone spacer and thats when the line was shut down and gm went with a niles switch where it is mounted inside the transmission so it makes it more work to replace than this switch did
I'm planning to replace the safety neutral switch on my 1997 GMC Sierra k1500 5.7, I saw another one of your videos showing the process based on the truck description I made, pretty good video as always, just one thing... The other video is not specifying if the truck needs to be in neutral.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Sometimes the adjustment of the switch will correct a failure. Loosen the two screws slightly. Adjust the switch until, truck cranks while in park or neutral and will not crank in drive, reverse and other drive positions. If this works the switch was not timed properly instead of having a bad switch. Tighten the bolts. I did this on my vehicle - it works fine as it was cracking while in reverse before the adjustment. Stoney COL (r)
Best video I found for this. To the point, great instructions, thank you.
we used to make those in rushford mn at trw they had an epoxy sealer where the wire connector goes and some had to replace the wiring harness then when it changed it had a silicone spacer and thats when the line was shut down and gm went with a niles switch where it is mounted inside the transmission so it makes it more work to replace than this switch did
I'm planning to replace the safety neutral switch on my 1997 GMC Sierra k1500 5.7, I saw another one of your videos showing the process based on the truck description I made, pretty good video as always, just one thing... The other video is not specifying if the truck needs to be in neutral.
What were the symptoms to make u change it?
Awesome video. Changed mine in 30 min..!
Is there a replacement process difference in manual vs automatic? If so, what differences should be observed?
Question replace safety neutral safety switch now when vehicle in park it say it in reverse what I due wrong
What lubricant should I use
He stayed away from aligning the switch before installing. That's the most aggravating part. Disappointing trq
Carefully not to ruin your transmission .omfg really .smfh .corn