I'm guessing this isn't the final version, but it's pretty dang good. I like this one way better than the previous two versions. It still has a little rasp, but it's not bad at all.
You should point a couple of the tips down or to the left or right at an angle, won’t affect performance so it ‘doesn’t matter’ if they aren’t straight
Video never does exhaust tones justice - but man I think it sounds really good. But like you, I've traded around exhaust setups a few times on vehicles to really dial it in...so, I'm sure this isn't the last iteration.
2:15 I thought that guy was that real uptight red Audi owner 😂😂 but then I doubt he would want anything to do Matt after he took his car for a drive and all the bad comments on that video about Mr Uptight 😀😀😅
Hey Matt or you allowing these exhaust to break in a couple hundred miles before deciding you don't like them? The tone does get louder and change after break in for all them.
" Cause what happens when the force pulls you back your foot you naturally comes off the gas, you have to keep your foot to the floor...foot to the floor.........k-band...........Dailed in."
Shorts and T shirt everyday, what a great place to work! LOL Also 8:10 I kept wanting to rub that little spot of debris off the tire. In some of the wide shots it looked like a nail head sticking out of the tire.
I see a blowout sale for pressure washers in the near future! ;-) As for the exhaust. I think this full Dinan setup sound very nice and with that diffuser or rear lip. The tips are fine. It looks like you jumped the gun there my friend. The mufflers that game on the car sounded much better with this catless center section. Then this super expensive Eisenmann muffler you bought and now have to resell with a $ loss
The term "drone noise" drives me infinitely crazy. If you are messing with the stock, or wanting a performance exhaust, then who cares about "drone noise". That's part of the game. Plus, "drone noise" sounds great inside the vehicle. Last but not least, when did this phrase become part of our vocabulary, because I can remember growing up in the 70's and 80's and no one ever talked about this when adding exhaust to their muscle cars.
Admitting you're a hooligan is the first step! Having loud exhausts keeps all the giant trucks around me from running my tiny European cars off the road in the South.
@@nzos14 wow, thats what i get for skimming! Thanks. Sounds like my '13 M3...the same Dinan Mufflers mated to a BimmerWorld Racing Front X-Pipe with Resonators by MagnaFlow. I love it.
Not sure I like the defuser, I think your car has a great clean and nice look to it. You see lots of M3 with too much carbon hanging off them, but you always look at a real nice set up clean e90/92. Well I do anyway. However In saying that I do like the Black Crome Grill and side vents. Anyway I am looking at them for my e90 M3. Not sure you have the Exhaust right yep but once you do some videoing driving it that my be different. I saw some aFe Exhaust that seemed interesting and added HP supposedly. Anyway looking forward to more progress. Thanks for this journey
Eisenmann Sport was way to muted for me. The Race with a resonated, catless midpipe has some pretty nasty drone, but does sound amazing outside the car.
@@ObsessedGarage thanks! I’ve tried MPE, M3 World, Valvetronic all with test pipes and stock resonators and secondary cats. Can’t find the sweet spot of loudness but with minimal drone or rasp 🤦🏻♂️
I have mostly Dinan components on my car except I did not like the fake tips on the exhaust. I ended up going with an AA exhaust because I liked the sound and looks. The AA exhaust is heavy though.
Sonic sell a rolling cart? I wont work without one anymore, it keeps me from losing track of tools, or losing organization of bolts and smaller parts while working. Just a suggestion...
Yeah I just came down here to post about a rolling tool cart. I need one badly. Even though I set up a small work table next to my car when I did my timing belt and oil pan gasket over the Thanksgiving holiday, I still kept losing stuff. Either I left it on the floor, or put it on the work bench, or put it on the work table. I need a rolling cart to have everything close at hand at all times.
Honestly, you dont need to complicate it with drawers or anything fancy just something that organizes your work space better. It also keeps tools within reach especially when you are working above your head.
@@chriscolburn4244 yeah I recently binged Eric The Car Guy's Mini Cooper series, where he always had all the tools directly at hand on the tool cart. I saw that and was like DANG I NEED ONE!!! Trick is, though, is that I need a folding cart due to storage limitations in my garage. Amazon has one that I hope to pick up soon.
@@Patrick94GSR Check out the Motamec modular mobile tool boxes, they are great. www.motamec.com/motamec-tools/tool-storage/tool-boxes.html?___SID=S&p=1
Dropped you a comment on Instagram, I don’t use it much so I’m not sure if you’re as active there as here, but didn’t see a email listed and can’t really blame you there. What do you think about OG twist on commercial car wash bays. There’s obviously a couple ways you could do it but in the end it would need to be a certain standard to bear your name Could you take your industrial equipment for car cleaning knowledge and do the unattended bay better or would differentiating yourself be a challenge that not even a grassroots word of mouth type of continuous campaign would work. I’d think at least in more dense areas with a larger car scene it could work with smart advertising instead of traditional routes. I’ll shut up now before I list 20 different fantastical ideas and sound crazy
This is Obsessed Garage headquarters where he runs the OG business. Check out some of his wash videos where you can see his custom wash bay at his house.
Congratulations.
That sounds great and that carbon piece looks great.
Try ideas and eventually get it right. May as well and enjoy the m3.
i just got my OG hoodie in the mail yesterday, probably the most comfortable sweatshirt i have ever bought
Probably took him 800 hoodies to get it right for you 🤣
Skipped ahead once I heard the diffuser was going on. What is patience. Looks so good😯
I'm guessing this isn't the final version, but it's pretty dang good. I like this one way better than the previous two versions. It still has a little rasp, but it's not bad at all.
I had the AC Schnitzer exhaust on my E92 M3. No drone and sounded amazing. I ended up doing test pipes later and it was totally bonkers sounding.
Would definitely keep this setup. Just right, perfectly suits the S65 motor!
That diffuser is legit Matt. Looks amazing
This setup by far sounds the best imo. The rasp is still there but its less prominent than the other two.
Holy shit that sounds amazing! Love the setup
You should point a couple of the tips down or to the left or right at an angle, won’t affect performance so it ‘doesn’t matter’ if they aren’t straight
Video never does exhaust tones justice - but man I think it sounds really good. But like you, I've traded around exhaust setups a few times on vehicles to really dial it in...so, I'm sure this isn't the last iteration.
Well I had 7 exhaust systems on my Mustang but that was in 17 years. You had 3 in a few weeks so you're already on your way to the Championship.
Sounds SO much better
Every Mans Dream Garage all those Tools man 😋
Much better than last time.
You should consider investing in a transmission jack, makes these kind of jobs alot easier.
Yes, it's on the list for sure!
You need to get a tool cart to have under the lift, while you’re working there to save your back and have everything handy.
Making want to get rid of my M4 and get into an E92 M3 🤦🏻♂️that S65 man 🔥
Did you do it??
glad it only took me 2 systems to be happy :)
2:15 I thought that guy was that real uptight red Audi owner 😂😂 but then I doubt he would want anything to do Matt after he took his car for a drive and all the bad comments on that video about Mr Uptight 😀😀😅
That's Matts friend owns a few nice cars too ftype, s550 etc, Matt made a video a while back adding flooring to his garage
Hey Matt or you allowing these exhaust to break in a couple hundred miles before deciding you don't like them? The tone does get louder and change after break in for all them.
Yeah, I did on the Eisenmann.
Carbon front bumper lip would finish it off nicely for looks
I have the Mode Carbon coming in a few weeks.
sounds and looks wayyyyyyyy better
" Cause what happens when the force pulls you back your foot you naturally comes off the gas, you have to keep your foot to the floor...foot to the floor.........k-band...........Dailed in."
Werks Guy You forgot “K Band”. 🤣. Good old Bryan Orr outro.
@@joetacchino4470 shit man thanks lol! good ear
Sounds better now, 👍
Shorts and T shirt everyday, what a great place to work! LOL Also 8:10 I kept wanting to rub that little spot of debris off the tire. In some of the wide shots it looked like a nail head sticking out of the tire.
" I am sorry Matt " =====> 03:57 I can’t stop laughing.
I see a blowout sale for pressure washers in the near future! ;-)
As for the exhaust. I think this full Dinan setup sound very nice and with that diffuser or rear lip. The tips are fine.
It looks like you jumped the gun there my friend. The mufflers that game on the car sounded much better with this catless center section. Then this super expensive Eisenmann muffler you bought and now have to resell with a $ loss
The term "drone noise" drives me infinitely crazy. If you are messing with the stock, or wanting a performance exhaust, then who cares about "drone noise". That's part of the game. Plus, "drone noise" sounds great inside the vehicle. Last but not least, when did this phrase become part of our vocabulary, because I can remember growing up in the 70's and 80's and no one ever talked about this when adding exhaust to their muscle cars.
You must have never heard heavy drone. It is unbearable.
Sounds amazing!
Admitting you're a hooligan is the first step! Having loud exhausts keeps all the giant trucks around me from running my tiny European cars off the road in the South.
great looking car lift
Not sold on the diffuser just yet but the Dinan sounds great!
Me either. I took it off.
That sounds good man that is from the wee little we heard of it :)
Yeah, it's good to go.
Looks and sounds awesome
Where to get this diffuser? Looks awesome
Sounds fantastic
You gotta add this car to the website
Would this EVER pass an OBD emissions test, with a Dinan x-pipe and rear section?
awesome tools
The most statisfying to see is to clean up the tools.
I would have had to have polished up the exhaust before putting it back on!
Oh...I thought about it.
If you ever want a custom diffuser, let me know. I'm making my own carbon parts.
okay, what did i miss...no test run, just installation video? Why are some in the comments saying its sounds great??? i missed something
Green Tip Academy it’s posted on Instagram
14:00?
@@nzos14 wow, thats what i get for skimming! Thanks. Sounds like my '13 M3...the same Dinan Mufflers mated to a BimmerWorld Racing Front X-Pipe with Resonators by MagnaFlow. I love it.
Sounds good to me
Not sure I like the defuser, I think your car has a great clean and nice look to it. You see lots of M3 with too much carbon hanging off them, but you always look at a real nice set up clean e90/92. Well I do anyway. However In saying that I do like the Black Crome Grill and side vents. Anyway I am looking at them for my e90 M3. Not sure you have the Exhaust right yep but once you do some videoing driving it that my be different. I saw some aFe Exhaust that seemed interesting and added HP supposedly. Anyway looking forward to more progress. Thanks for this journey
Agreed. It lasted 12 hours with me. Already off...
Curious, why do the mufflers need grounding straps?
Did you ever the Borla Atack?
Look great Matt. To your defense, you didnt say how many ''few hundred dollars'' mods you had in mind. :)
Ha, ha...
Get a Meisterschaft GT, best sounding exhaust for the e92 m3. (not the GT2, it's too loud)
Borla ATAK. Not boutique euro tuner brand but will solve your problem
Have you heard in person eisenmann race with just test pipes? If so was drone too much?
Eisenmann Sport was way to muted for me. The Race with a resonated, catless midpipe has some pretty nasty drone, but does sound amazing outside the car.
@@ObsessedGarage thanks! I’ve tried MPE, M3 World, Valvetronic all with test pipes and stock resonators and secondary cats. Can’t find the sweet spot of loudness but with minimal drone or rasp 🤦🏻♂️
I'm a dinan fanboy. I woulda went full dinan right off the bat 😂😂
I have mostly Dinan components on my car except I did not like the fake tips on the exhaust. I ended up going with an AA exhaust because I liked the sound and looks. The AA exhaust is heavy though.
Im jealous of your toolbox
Just straight pipe it bro!! 😂
Korey Klimezky 9oooo
Still too raspy imo but maybe that's the nature of the S65.
Hey Matt, I'm interested in your Eisenmann Sport for my personal E92 M3. I'll email you to see if it's still available.
I'm sure you've probably been asked at least 800 times by now, but I have to ask. Who manufactured your scissor lift ?
Twin Busch
That lift sketches me out. Too many pivot points for my comfort.
When can we get a full exhaust video?!
It's on my list for this coming week.
Obsessed Garage thanks! Looking forward to it
Sorry if I missed it, is this the original setup that came on the car?
The rear section was the one that was on the car, but I adde the catless middle section.
@@ObsessedGarage got it got it. Very nice, this setup sounds really good. No M rasp. More throaty and deep
Sonic sell a rolling cart? I wont work without one anymore, it keeps me from losing track of tools, or losing organization of bolts and smaller parts while working. Just a suggestion...
Yes, they do, and I'm coming around to that idea.
Yeah I just came down here to post about a rolling tool cart. I need one badly. Even though I set up a small work table next to my car when I did my timing belt and oil pan gasket over the Thanksgiving holiday, I still kept losing stuff. Either I left it on the floor, or put it on the work bench, or put it on the work table. I need a rolling cart to have everything close at hand at all times.
Honestly, you dont need to complicate it with drawers or anything fancy just something that organizes your work space better. It also keeps tools within reach especially when you are working above your head.
@@chriscolburn4244 yeah I recently binged Eric The Car Guy's Mini Cooper series, where he always had all the tools directly at hand on the tool cart. I saw that and was like DANG I NEED ONE!!! Trick is, though, is that I need a folding cart due to storage limitations in my garage. Amazon has one that I hope to pick up soon.
@@Patrick94GSR Check out the Motamec modular mobile tool boxes, they are great. www.motamec.com/motamec-tools/tool-storage/tool-boxes.html?___SID=S&p=1
Hi how to find dinan midpipe ? I can’t find it anywhere
What is the deal with all those karcher pressure washers
Just gets Matt stoked every time he looks at them!
what’s the over and under on how many days this car stays?
sela smith I said July 1, 2019
Dropped you a comment on Instagram, I don’t use it much so I’m not sure if you’re as active there as here, but didn’t see a email listed and can’t really blame you there.
What do you think about OG twist on commercial car wash bays. There’s obviously a couple ways you could do it but in the end it would need to be a certain standard to bear your name
Could you take your industrial equipment for car cleaning knowledge and do the unattended bay better or would differentiating yourself be a challenge that not even a grassroots word of mouth type of continuous campaign would work. I’d think at least in more dense areas with a larger car scene it could work with smart advertising instead of traditional routes.
I’ll shut up now before I list 20 different fantastical ideas and sound crazy
Are there safety breaks on that lift?
Yes, it has latches that engage every few inches.
all lifts have safety latches. I'm pretty sure they wouldn't be legal for sale in the US if they didn't.
what brand diffuser is that? can you share a source?
This is RKP from IND Distribution.
new subscriber here! so do you own this shop/store? or is this a home garage
This is his testing facility/shop/warehouse
This is Obsessed Garage headquarters where he runs the OG business. Check out some of his wash videos where you can see his custom wash bay at his house.
Yeah, this is my testing area in my packing/shipping/studio/everything warehouse. I don't detail cars for others. I just do my own.
What company is that rear diffuser?
RKP
Warning - hard hat area! :P
Install an iPE exhaust
I don't do junk.
I’m interested in the Eis, can you dm me
Shoot me an email. matt@obsessedgarage.com
Message me, Im interested in the eisenman. Thanks.
We don't have messaging any longer. My email is matt@obsessedgarage.com
Second !
Too quiet!
First Comment! LOL