Hello, could you please explain how to Spin ONLY. Is there an option how to do this. Just Spin without Rinse or anything. Back in the ays washing machines had this option. You could basically just open your washing machine dial or click Spin option and it would just do that without the entire washing program. I almost forgot, does the machine shakes a lot during Spinning? Not the normal program but just during spinning? Thanks
It shouldn't lean back as far as that, that's why it looks like it's curving backwards (apart from the top where it does curve.) The front should be vertical. The fitters should have set the height correctly with the adjustable feet using a spirit level on the top, going horizontally, and a spirit level vertically on the face of the washing machine. Either the feet on the rear need extending to bring the back higher or the front feet adjusting to make it lower. Check your manual and it's explained in there, I'm surprised the fitters didn't do this. You simply have to twist the feet to adjust them higher or lower. These appear to be superb washing machines and really quiet, I only installed mine today ;-)
There is a lock icon showing on the screen. I press the rpm and finished button simultaneously but still the lock icon keep showing. How to get rid of it?
Hold the second and third keys simultaneously for about three seconds, until you hear a beep and see the key icon appear in the display; to unlock, repeat the procedure. There's a tiny key icon visible on the control panel over those two keys.
Lots of useful information in this review.
Much easier to find than in the manual.
This is so helpful, ma'am! The Bosch service technician didn't tell me a quarter of this. Just got a new machine and I found it too high tech.
Hello, could you please explain how to Spin ONLY.
Is there an option how to do this. Just Spin without Rinse or anything.
Back in the ays washing machines had this option. You could basically just open your washing machine dial or click Spin option and it would just do that without the entire washing program.
I almost forgot, does the machine shakes a lot during Spinning?
Not the normal program but just during spinning?
Thanks
It shouldn't lean back as far as that, that's why it looks like it's curving backwards (apart from the top where it does curve.) The front should be vertical. The fitters should have set the height correctly with the adjustable feet using a spirit level on the top, going horizontally, and a spirit level vertically on the face of the washing machine. Either the feet on the rear need extending to bring the back higher or the front feet adjusting to make it lower. Check your manual and it's explained in there, I'm surprised the fitters didn't do this. You simply have to twist the feet to adjust them higher or lower. These appear to be superb washing machines and really quiet, I only installed mine today ;-)
Do you have still this washing machine? Are you satisfied after 4 years?
Very instructive
Wow! Andrew, you're gorgeous!
This was awesome....thanks
Very informative But no instructions on how to do a "spin only" programme
You select Rinse Spin Drain and then just select on the machine to just spin and not rinse.
There is a lock icon showing on the screen. I press the rpm and finished button simultaneously but still the lock icon keep showing. How to get rid of it?
read the manual
Please i need help my Busch washer is not taking command
Seems not available in India
Where is child lock ?
Hold the second and third keys simultaneously for about three seconds, until you hear a beep and see the key icon appear in the display; to unlock, repeat the procedure. There's a tiny key icon visible on the control panel over those two keys.