Thanks alot bro I really appreciate this as I'm building a project bakkie bt was stuck with gearbox problems and this wil definitely solve my issue thanks alot
If you can't measure your crank and block yourself take it to an engineering place . Block will give you your ring size , crank your mains and big ends
@@solveitautomotive9485 oil pump water pump thermostat pulleys needs to be changed then there a sound on the car sounds like the lifters. But tje car does it job Any referrals in cape town as i would like a proper repaired done also i have a parasitic draw on my car i need to remove my battery every night
Hey man, great stuff!! Really hard to find videos of Opel Corsas on TH-cam with so much information on it. If someone in the comments can help me find the repair maintenance book to download for a opel corsa lite 2004 1.4, I will really appreciate it.
Hi sir , we did an engine overhaul. My mechanic requested a new crank pulley. I got him a good second hand . He says the car is cranking but the pulley is wobbling so the car will not start. He says the reason is the the pulley comes loose any suggestions.
Hi there . It's hard for me to say, but it must be a very bad wobble for it not to start. That means the second hand one u got is also not good. Did he check the timing crank pulley, which sits behind the crank pulley.
@@solveitautomotive9485 hi there , i just want to know ,the big end bearings and piston rings isit standard or does the size differ ?? I need to replace big ends bearings and rings on my opel corsa gamma 1.4
@@colindavids37hi . If you are not sure about if your engine is standard or not , it would be best to take it to a engineering shop that can measure it up for you and tell you exactly what the size is
Nice video. I have a problem with this Opel corsa 1.4. Replaced the gasket and after starting 5 minutes the engine water will come back boiled to the radiator extra tank filled over. The engine is too hot. Why the boiled water come back to the tank in reverse from the engine. It filled over Can you please help me. Can you please share your WhatsApp number
Hi there this can be a number of issues to cause this. I assume u mean you changed the head gasket. Did u change the water pump and thermostat? Is Water running clean through their radiator.
Have not any torx on my 1.8 1992 running smooth 460thousand. Its been in family for a decade. Since 120thousand
Excellent
Thank you so much for creating this channel and the helpful content. Very much appreciated.
Thanks so much
Thanks alot bro I really appreciate this as I'm building a project bakkie bt was stuck with gearbox problems and this wil definitely solve my issue thanks alot
Thanks so much, need to do my 2011 UTILITY 1.8 Sport
Go for it
Nice video man, like it. Sitting here with suspected head gasket leak :| on my 1.4 hatch - so it makes your work very informative - thank you.
Thank you so much for the comment. Yes it's not nice have these problems, but they can be solved.
Where u from?
Are you doing it yourself?
@@solveitautomotive9485 Helderberg area, no too much work. Are busy getting quotes, but they are not cheap.
@@charlesblount105 yes definitely not cheap. Well good luck and if you have any questions just ask.
What felt weird on this engine was the seperate cambox that u had to bolt on , interesting design
Hwzt please what's the torque settings for connecting rod bearings and main bearings TIA
Really helpful video thanks alot buddy👍
Dope Content bro!! Keep the work up,!! 🌋🚨
Thank you so much for your comment.
The piston rings and big end bearings is that standard or what size is the rings or what ???
If you can't measure your crank and block yourself take it to an engineering place . Block will give you your ring size , crank your mains and big ends
What will it cost to do a job like this on my opel corsa lite sedan 1.6
It really just depends on the current condition of the engine and how well the engine has been maintained.
@@solveitautomotive9485 oil pump
water pump
thermostat
pulleys needs to be changed
then there a sound on the car
sounds like the lifters.
But tje car does it job
Any referrals in cape town
as i would like a proper repaired done
also i have a parasitic draw on my car
i need to remove my battery every night
PLEASE HELP.. OPEL CORSA 2005 COMFORT SEDAN 1600,TEMP SENSOR WHERE IS IT LOCATED.
it's located exactly under the coil pack
Hey man, great stuff!! Really hard to find videos of Opel Corsas on TH-cam with so much information on it. If someone in the comments can help me find the repair maintenance book to download for a opel corsa lite 2004 1.4, I will really appreciate it.
What is the torque settings on motor
Hi . Which torque settings are you referring to
Hi sir , we did an engine overhaul.
My mechanic requested a new crank pulley. I got him a good second hand .
He says the car is cranking but the pulley is wobbling so the car will not start.
He says the reason is the the pulley comes loose any suggestions.
Hi there .
It's hard for me to say, but it must be a very bad wobble for it not to start.
That means the second hand one u got is also not good.
Did he check the timing crank pulley, which sits behind the crank pulley.
What car is it
@@solveitautomotive9485 Alright it Is a opel corsa bakkie 1.4 .
Let me find out if he checked the crank timing ,
@@solveitautomotive9485 hi there , i just want to know ,the big end bearings and piston rings isit standard or does the size differ ?? I need to replace big ends bearings and rings on my opel corsa gamma 1.4
@@colindavids37hi . If you are not sure about if your engine is standard or not , it would be best to take it to a engineering shop that can measure it up for you and tell you exactly what the size is
guys where is knock sensor located
Hlw I need engine 1,4 model 2014
Hi Sir it would attract more people to watch, if you could explain what you are doing,just saying.Thx
Thanks my man . Unfortunately it is like that now .
But if you have any questions go ahead and ask .
Awesome
Nice video. I have a problem with this Opel corsa 1.4. Replaced the gasket and after starting 5 minutes the engine water will come back boiled to the radiator extra tank filled over. The engine is too hot.
Why the boiled water come back to the tank in reverse from the engine. It filled over
Can you please help me.
Can you please share your WhatsApp number
Thank I appreciate your comment
Thank you
Hi there this can be a number of issues to cause this. I assume u mean you changed the head gasket. Did u change the water pump and thermostat?
Is Water running clean through their radiator.
So sorry but I don't share my number publIc ly.
Can u answer the questions I asked , maybe we can solve it.
Really helpful video thanks alot buddy👍
Thank you