ฝัง
- เผยแพร่เมื่อ 16 ม.ค. 2025
- Here are the part numbers that you will need:
P/N Desc
Main Bumper Parts:
12469405 A2 AIRLIFT BUMPER ASSEMBLY, REAR NSN:2540-01-196-4920
12446989 LH OUTER BRACKET NSN: 5340-01-408-8523
12446990 RH OUTER BRACKET NSN: 5340-01-408-8529
12338194 SUPPORT,BUMPER INNER NSN: 2540-01-196-4723 (x2)
12338164 SPACER,PLATE NSN: 5340-01-205-5377 (x4)
12339186 BRACE ASSEMBLY,BUMPER OUTER NSN: 2540-01-257-3877 (x2 This is OPTIONAL)
Accessories:
12447089-2 REAR BUMPER SHACKLE RING NSN: 5340-01-412-7514 (x2)
12342354 SHACKLE NSN: 4030-01-316-1551 (x2)
12339332 PLATE,RETAINING (Towing plug adapter plate) NSN: 5935-01-421-4801
Fittings:
(FOR BUMPER & SUPPORT BEAMS)
16x 1/2-13 X 3.00 Bolts
8x 1/2-13 X 4.25 Bolts
2x 1/2-13 X 3.75 Bolts
26x 1/2-13 Lock Nuts
56x 1/2 Flat Washers
(FOR SIDE SHACKLE)
2x 1/8 X 1.25 Cotter Pins
2x 5/8-18 Castle Nuts
2x 49/64 I.D Flat Washers
(FOR FRONT LIFTING SHACKLES)
2x 3/32 X 1/2 Cotter Pins
2x 3/4-20 Castle Nuts
2x 3/4 Flat Washers
This has got to be the most detailed and thorough installation of an air lift bumper on a HMMWV! Great job on attention to details and sharing! 👍👍
Thank you!
Dude, that inner brace to the pintle hook that you left off is where your pioneer rack latches on to hold it in place.
Best airlift-bumper install video available!!
I know a 3 inch when I see one🤣🤣🤣love the channel brother.
YES SIR... I CONCUR WITH CHUCK... VERY WELL DONE AND LAYED OUT VIDEO... THX A MILLION... I JUST BOUGHT ME A 1990 M998 AND I'M GOING TO BE GETTING IT ALL DRESSED UP AND LOOKING LIKE A HIGH DOLLAR CIVIL HUMMER H1... JUST NEEDED TO SEE WHAT ALL WAS INVOLVED TO PUT ON MY REAR AIR LIFT BUMPER NOW I KNOW...
THANKS AND GOD BLESS 👍🤠📿🇺🇸
It really compliments the hum. nice work 👏
That was a very informative video. Well done sir.
Thanks for the video. It is a good help indeed. Much appreciated.
Very calm presentation.
Sure helped a lot . Thank you.
Great video Thank you!
Damn, dude. You need to get you some friends. HMMWV parts are heavy. Helping hands are necessary some times. You handled the bumper very well, though. Congrats.
Great work. Thank you
Why didn't you use the inside angle brackets? ( You removed them when you unbolted the pintle hitch)
Chuck, I believe I ended up ditching that because the added thickness of the bumper made it so that the pintle hitch bolt became so short at the end that the hole for the cotter pin was no longer showing. I wanted to be able to stick the pin in there in case the nut backs out.
カッコイイ～ハマーに秀樹感激Goodです=3
PLEASE ...consider using "IMPACT' sockets whenever using an Impact wrench; The Air-lift/tow hooks are to mounted using a castle nut.and wave-washer so enough tension can be applied to prevent the "hook" from flopping (rattle) around. The original "Pioneer Kit" will work with an Air-lift Rear Crossmember, but additional bracketry is required. Forgot to transfer the 2 Pintle Hook diagonal braces to the Air-lift Rear Crossmember.
Jason is the list of parts updated with the bolts that you had to change out?
PLEASE LET ME KNOW WHERE YOU BOUGHT THE BUMPER, I see its all boxed in (close no gaps) super nice video.
Loveing it need that for mine how much was that bumper?
Do you have the P/N for the oval shapped rubber body bushing?
Sorry, I do not.
Сколько стоит этот Хаммер?
Tactical Asians are the best asians! Haha
I would recommend that you stop using chrome sockets on your impact as they will fail spectacularly and they are not designed for that kind of abuse. I have see someone almost loose an eye. They are thinner than impact sockets and if impact sockets fail they will only expand with the crack that will form as they are of a softer material.
Other wise a great vid.
I appreciate your comment Eric, and you are absolutely correct. Thank you!
@@jasonhuofficial The question is are you going to get impact sockets? I got a slant back Humvee and waiting for the EUC reply to pick mine up.
@@okjd159 I actually have some. For some reason I didn't use them for the video. GL on the EUC, I hear it's been taking longer and longer to process.
@@jasonhuofficial Then sop teaching bad habits LOL.
@@okjd159 Same for mines, I'm waiting on a EUC, did you get your slant back yet? If so, how do you like the top? I want to convert mines to a slant back
why you are mounting an Airlift bumper ? Do you think on Invaders of China Soldiers;
and *IF - who is lifting ?? and where you will move ??
Airlift bumpers provide some rear impact resistance.
+ they look cool.
For mud flaps you need the bumper.
And the spare tire carrier.
He needs the bumper because he is an AMERICAN.
That is enough.
@@HK-qj4im well said