Very informative sir...but sir can u please tell me that when to discard rotary files...means after doing 2 or 3 patient there is always fear in my mind that file may break.....so how can we identify that there is time to discard that files?
Dear doctor 🌹 may i know if these steps are correct because if not would u correcr for me : 1) find the canal by k file 10 2) orifice opener 3 mm 3)adjust estimation W.L from the table like for example MB canal is 22 mm so adjust to 22 mm and start the glide path 4) take acutal W.L with 10 and 15 Files 5) start your rotary files 6)if your last rotary file is 30 .. bring k file #30 and adjust to W.L for recapitulation 7)make your last patency with file k#10 after the recapitulation 8) start obturation procedure
Sir, some time or every time 20 no. 4%gp does not match same no.n same taper file prepared canal , gp. Does not reach till apex ..how I can come out this problem sir ..
This is common problem with heat treated or especially with NeoEndo files. When they become old like after 3 cases, they reach to apex but don't cut the dentin on walls. In this case, either prepare the canal till 25, 4% or use a new 20, 4% file for preparation. Sometimes this is because of bad quality GPs also as they bend in between before reaching WL Regards
Sir in video you said 10 no followed by rotary. Won't it put lot of pressure on 4% rotary How many times you use a rotary file? Also you never use 15 no or 20 number hand files?
Hi I had a habit of preparing canals till #20 hand file in initial days. But I found #15 and #20 are stiff instruments for molars. If you wish to use them, first put rotary file after #10, don't take it to working length if you are feeling pressure. Then use #15, then take rotary file further till WL. This will decrease the chances of procedural errors like straightening of canals, ledge etc. Regards
Sir, question not related to this video but what anesthesia is preferred clinically for mandibular premolars rct... buccal and lingual infiltration or IAN block??
@ Vineel Chaitanya , @ Neeraja : Neeraja , Beginners or inka ekadooo sangathi tarvatha. 2 Lakhs Rpm anta You tube Video lo chusanu. Concentration undali kada neeraja ? Edaina one second Hanpiece Handling lo theda vachindi ante 2 Lakhs Rpm aae External Wall or Internal Wall ko tagilide anuko Depending on pressure applied on the Handpiece appudu emavuthundi ? ledaa 2 Lakhs Rpm on Pulpal Floor or Gingival floor meeda edaina theda vasthe emavuthundi ? or Pakka Tooth Proximal Contact ki velli tagilithe ? Vineel sir, Final year Exam lo Class 2 Cavity Preparation okasari chesanu sir , Devudi daya valla Cavity Bagane Vachindi ankunnanu. adi kuda Lower Molar meeda nenu chesina oke oka Cavity Preparation . Sir, Upper Molar meeda Indirect Vision tho Cavity preparation chese antha scene ledu. Walls or Contact point bur rpm ki theda vachi egarakunda undadam chudali. - Thankyou.
Sir good morning.i have another query.sometimes while doing rct in lower molars by hand files,it sometimes becomes very diffcult to reach working length with 25 k files in mesial and lingual canals.in such cases what is the remedy??
Thank u doctor U mean between every rotary file we use #10 K file then irrigation And for every case after preparation done we use #30 k file ? And sorry doctor after last file use we must use again #10k file? Thanks 🙏🏻
I prepared for AIIMS in 2010. Now all scenarios and patterns have changed. You can contact Dr Aishvarya Kaushik for MDS preperation. He is really good in that.
Thanks Doctor...I am practicing in Kolkata...now I realise that learning rotary endo is essential... could you suggest any simple rotary endo file system for beginners ??
What a video,,
Means
It's ultimate
The softness in ur knowledge and voice
Thankyou 🙏🙏
Very informative sir...but sir can u please tell me that when to discard rotary files...means after doing 2 or 3 patient there is always fear in my mind that file may break.....so how can we identify that there is time to discard that files?
Very Informative sir
Thank you so much sir🙏🙏
Please can u post a video regarding various rotary files nd which ones are best and less time consuming...
Ok sure🙏🙏
Hello Sir. Nicely explained. Just a small query. Why working length should be taken after using orifice opener?
Otherwise Working Length will change during BMP upto 1 mm
Thanks again Doctor for your replies... sorry if I have disturbed you...you have been very patient...
No issues🙏🙏
Awesome video sir..thank you very much.
🙏🙏
thank you dr Sukhwant
🙏🙏
Very nice video sir, plz make a video on retreatment, apicoectomy.
Sure thankyou🙏
Thanks doctor...your explanations were very useful and to the point...may I know where you practice ??
🙏👍
I practice in Delhi
@@Endocrisps Sze XLR ₹¥¥&.. No
Very well explained sir 👏🏻
🙏🙏
Awesome video
🙏🙏
Dear doctor 🌹 may i know if these steps are correct because if not would u correcr for me :
1) find the canal by k file 10
2) orifice opener 3 mm
3)adjust estimation W.L from the table like for example MB canal is 22 mm so adjust to 22 mm and start the glide path
4) take acutal W.L with 10 and 15 Files
5) start your rotary files
6)if your last rotary file is 30 .. bring k file #30 and adjust to W.L for recapitulation
7)make your last patency with file k#10 after the recapitulation
8) start obturation procedure
Good method👍
Sir plz tell ki rotary file Should be used in pecking or brushing motion
Some are in pecking motion like protaper
Some are in brushing motion like Mani
Very helpful technique 🙏🙏🙏
🙏🙏
Very nicely explained dear
🙏🙏
Sir, some time or every time 20 no. 4%gp does not match same no.n same taper file prepared canal , gp. Does not reach till apex ..how I can come out this problem sir ..
This is common problem with heat treated or especially with NeoEndo files. When they become old like after 3 cases, they reach to apex but don't cut the dentin on walls.
In this case, either prepare the canal till 25, 4% or use a new 20, 4% file for preparation.
Sometimes this is because of bad quality GPs also as they bend in between before reaching WL
Regards
@@Endocrisps thnx sir
Sir in video you said 10 no followed by rotary. Won't it put lot of pressure on 4% rotary
How many times you use a rotary file?
Also you never use 15 no or 20 number hand files?
Hi
I had a habit of preparing canals till #20 hand file in initial days. But I found #15 and #20 are stiff instruments for molars.
If you wish to use them, first put rotary file after #10, don't take it to working length if you are feeling pressure. Then use #15, then take rotary file further till WL.
This will decrease the chances of procedural errors like straightening of canals, ledge etc.
Regards
@@Endocrisps . Thank you Sir. But am sure after this rotary approach, new file requirement for rotary will increase.
Yes !!
Please make a complete video on rotary endodontucs so that it will help us in clinics.
Sure !!🙏🙏🙏
Sir is it necessary to reduce Occlusal surface to take working length
Better👍
Thank u sir
Sir, question not related to this video but what anesthesia is preferred clinically for mandibular premolars rct... buccal and lingual infiltration or IAN block??
Hi
IANB is best but mental nerve block also works in mandibular premolar RCT.
@@Endocrisps but sir mental nerve does not innervate the premolar pulp right?
Mental nerve supplies premolars too. 🙏🙏
Golden tips🙏
🙏🙏
@ Vineel Chaitanya , @ Neeraja : Neeraja , Beginners or inka ekadooo sangathi tarvatha. 2 Lakhs Rpm anta You tube Video lo chusanu. Concentration undali kada neeraja ? Edaina one second Hanpiece Handling lo theda vachindi ante 2 Lakhs Rpm aae External Wall or Internal Wall ko tagilide anuko Depending on pressure applied on the Handpiece appudu emavuthundi ? ledaa 2 Lakhs Rpm on Pulpal Floor or Gingival floor meeda edaina theda vasthe emavuthundi ? or Pakka Tooth Proximal Contact ki velli tagilithe ? Vineel sir, Final year Exam lo Class 2 Cavity Preparation okasari chesanu sir , Devudi daya valla Cavity Bagane Vachindi ankunnanu. adi kuda Lower Molar meeda nenu chesina oke oka Cavity Preparation . Sir, Upper Molar meeda Indirect Vision tho Cavity preparation chese antha scene ledu. Walls or Contact point bur rpm ki theda vachi egarakunda undadam chudali. - Thankyou.
Sir i have one question .the sequence of rotary files will be 20/.04,25/.04,20/.06,25/.06 and so on??
th-cam.com/video/azOAK6PGppg/w-d-xo.html
Watch this👆
@@Endocrisps thank you it helped me much.
🙏🙏
Sir good morning.i have another query.sometimes while doing rct in lower molars by hand files,it sometimes becomes very diffcult to reach working length with 25 k files in mesial and lingual canals.in such cases what is the remedy??
It happens in curved canals. Its better to prepare these canals with rotary.
Thank u doctor
U mean between every rotary file we use #10 K file then irrigation
And for every case after preparation done we use #30 k file ?
And sorry doctor after last file use we must use again #10k file? Thanks 🙏🏻
Agreed👌
Make video on Dental loops including criteria of buying, using etc
Sure !
Thankyou🙏🙏
Thanks so much 👍
🙏🙏
You, thank you❤
🙏🙏
In rotary files, How to know that until what file number we have to do the BMP in particular tooth ?
Watch this
th-cam.com/video/azOAK6PGppg/w-d-xo.html
Good tips
🙏🙏
Sir how to negotiate curved canals?
Please make a video
Ok sure🙏🙏
Nice video sir
Thankyou🙏🙏
How we know that the enlargement of canals are adequate.how much are you enlarging.pls explain?
Watch this !!!
th-cam.com/video/azOAK6PGppg/w-d-xo.html
Sir, it's a nice video.. May I know what books you used to prepare for AIIMS..
THANKYOU 🙏
I prepared for AIIMS in 2010. Now all scenarios and patterns have changed.
You can contact Dr Aishvarya Kaushik for MDS preperation. He is really good in that.
@@Endocrisps thank you.. May I know the details to contact..
+919899608106
Thanks Doctor...I am practicing in Kolkata...now I realise that learning rotary endo is essential... could you suggest any simple rotary endo file system for beginners ??
Fanta - cheap and good
Thankyou sir
🙏🙏
Thanku sir 🙏
🙏🙏
Great 💜
Thankyou🙏
Sir please can you give a demo on rotary files? Thank u 🙏
Okay👍
INVALUABLE !!
Dr.sahab I NEED MANI DEALER PHONE NO..
Connect on FB
I am already connected..
I will connect you with mani guys !!!
Great
🙏🙏
Thank you Sir
🙏🙏
Orifice is spelled like office.
Unlike file or glide.
Thank you Sir
🙏🙏