Hi Bill. I'm posting this on your video because I like your clear and camera-steady presentation. Can you do a video on how to clean a washing machine? My Amana (cheap $299 model) works fine, except that lately (3 year old machine), after each spin, I get a rotten eggs smell. I've read that it's because it needs cleaning. But what exactly do I need to clean, and where are those places, and how do I get to them? I just ran some bleach through, and that helps for now, but I'd rather find the source of the problem and clean it out. A video showing all this would be helpful.
I have an Amana top load efficiency washer. It will fill then drain. I can reset it, sometimes it will work the whole cycle, sometimes not. Please help
Mine has clips on the top my washing machine has clips on the top of it that don't unscrew with 2 boats on each side how do you get it off of the cli Clips
hey Bill, my washer leaks badly on the first cycle, it seems like it's not agitating but rather spinning, throwing water out of the tub. what could be wrong? thanks in advance.
I must have a different model than yours, I don’t have the screws on the back like you show. My model number is. “NAV233AWW”. My washer leaks when it pumps the water out
First I'd like to say I am not a big fan of Amana. I inherited an Amana set. Now its slow filling. I watched your video but for whatever reason my washer is not the same. From the onset the two screws you access on the back aren't there. Now what?
I have a Kenmore with no visible screws. Completely baffled me. Turned out that the end caps are a snap fit. In my case you kind of place your fingers over the top to the back lift, and peel that towards you. Then continue to rotate the whole cap in the same direction. Once the end caps are off you can see the two screws that hold the control panel down. Maybe that will be helpful. After that it was just like this video.
I have a Kenmore with no visible screws. Completely baffled me. Turned out that the end caps are a snap fit. In my case you kind of place your fingers over the top to the back lift, and peel that towards you. Then continue to rotate the whole cap in the same direction. Once the end caps are off you can see the two screws that hold the control panel down. Maybe that will be helpful. After that it was just like this video. I just saw this th-cam.com/video/yXKt8bNO7W4/w-d-xo.html
for those who do not know, this is a Whirlpool direct drive washer with a sticker that says Amana. Whirlpool aquired this name when they bought a World leader in appliances..Maytag which i am sorry to say is no longer around...just stickers
Well that's a WAY more clever design than I expected. Nice! Thank you.
Thank you my washer won’t spin I couldn’t figure out how to get the cover off I appreciate this video
Thanks a bunch ur video saved me hundreds and have the courage to fix my own clogged pump took 60 min
Just what I needed! Thank you, Mr. Newberry!😊
Tanks bill, you are a BIG help the Lid Switch only Cost me $7.49 I Installed it my self
your are the man...
AWESOME! I COULD DO THIS IN MY SLEEP THANKS TO YOUR VIDEO!!! Now I gotta find how to change the drive belt. :-)
Thanks for the helpful video and comments. It took me awhile to find the right model to match my washer.
High quality how to right here
Awesome! quick and clear! Thank you bro!
Thank you from a single mom of three greatly appreciated
You sir, are a champ! Thank you!
Hi Bill. I'm posting this on your video because I like your clear and camera-steady presentation.
Can you do a video on how to clean a washing machine? My Amana (cheap $299 model) works fine, except that lately (3 year old machine), after each spin, I get a rotten eggs smell. I've read that it's because it needs cleaning. But what exactly do I need to clean, and where are those places, and how do I get to them? I just ran some bleach through, and that helps for now, but I'd rather find the source of the problem and clean it out. A video showing all this would be helpful.
Hey Bill
thanks for the information cause I needed to know how to remove the back to replace my drain hose. thanks very much
do i have to do all that to get to the tub?
I have an Amana top load efficiency washer. It will fill then drain. I can reset it, sometimes it will work the whole cycle, sometimes not. Please help
How do you clean washer screens on a Amanna Washer
may want to give some advice on how to put the cabinet back on without breaking the inlet arrangement.
looks like a two person job.
I'm definitely going to try that now way I was trying was not working the Springs have a lot of tension
THANKS ! Just couldn't figure out the top...thought it flipped up, not the whole case pivoted forward. 😳
Mine has clips on the top my washing machine has clips on the top of it that don't unscrew with 2 boats on each side how do you get it off of the cli Clips
well
How do I get the mount to the lid switch off the top of the washing machine
Very helpful and Thank You
My agitator stopped working today. Can you help?
Great video
hey Bill, my washer leaks badly on the first cycle, it seems like it's not agitating but rather spinning, throwing water out of the tub. what could be wrong? thanks in advance.
Unhook the water supply and fill it with a hose might try placing your washing machine over a floor drain or outside near the close line
Hey man thanks a lot!
what does it mean when my amana washer keeps draining how do I fix it
You made that look so simple. Thank you.
How do I disable the lid switch?
Hey crazy Bill, hope your having a good Sunday, hot one here.
MrMac5150 Hot and Humid! That's why the video is so short. My garage is about 100 degrees inside!
Bill Newberry
Same here, sucks.
help mine has clips
I must have a different model than yours, I don’t have the screws on the back like you show. My model number is. “NAV233AWW”. My washer leaks when it pumps the water out
thanks bill...
Damn, my amana washer has all kinds of crap connected to the lid top. I wish it was this easy.
mine dont have that
YOU THA MAN!!
+NEL LOCO Thanks Dude!
First I'd like to say I am not a big fan of Amana. I inherited an Amana set. Now its slow filling. I watched your video but for whatever reason my washer is not the same. From the onset the two screws you access on the back aren't there. Now what?
I have a Kenmore with no visible screws. Completely baffled me. Turned out that the end caps are a snap fit. In my case you kind of place your fingers over the top to the back lift, and peel that towards you. Then continue to rotate the whole cap in the same direction. Once the end caps are off you can see the two screws that hold the control panel down. Maybe that will be helpful. After that it was just like this video.
Mine is the same and another video said to remove 2 screws from the back but I still can get mine up
Thanks thanks thanks thanks I was going to remove it by the back.....not my cup of tea.... Much appreciate ! Jeff
+Jeff Boivin You are very welcome!
I was gonna wing it. GladI watched your video. ..
Thanks
My amana cover is 3 pieces.
The cabinet on my Amana NTW4605EW is nothing like this. Any help on removing the cabinet is appreciated.
I have a Kenmore with no visible screws. Completely baffled me. Turned out that the end caps are a snap fit. In my case you kind of place your fingers over the top to the back lift, and peel that towards you. Then continue to rotate the whole cap in the same direction. Once the end caps are off you can see the two screws that hold the control panel down. Maybe that will be helpful. After that it was just like this video. I just saw this th-cam.com/video/yXKt8bNO7W4/w-d-xo.html
I thought this was gonna be more difficult than that
Always
My Amana is absolutely nothing like this. Bummer.
MY WASHER IS AN OLDER MODEL THAT SEEMS TO LOOK LIKE THE WHOLE UNIT IS CLOSED? MODEL #ALW88OQAW
for those who do not know, this is a Whirlpool direct drive washer with a sticker that says Amana. Whirlpool aquired this name when they bought a World leader in appliances..Maytag which i am sorry to say is no longer around...just stickers
+Howard Wearmouth Thanks for your information. Some people have to have a Maytag and will buy it just for the name.