How to Replace Intake Manifold 99 Pontiac Grand Am
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/43/i/...
In the video, 1A Auto shows how to remove, replace and install an old, rusted, corroded or leaking upper intake manifold. The video is applicable to the Pontiac Grand Am and Olds Alero, model years 96, 97, 98, and 99.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oUm/1AX...
• Phillips Head Screwdriver 1aau.to/oUm/1AX...
• 10mm Socket 1aau.to/oFD/1AX...
• 13mm Socket 1aau.to/oKB/1AX...
• Needle nose pliers 1aau.to/ohb/1AX...
• Needle nose pliers 1aau.to/ohb/1AX...
• Ratchet 1aau.to/oU6/1AX...
• Socket Extensions 1aau.to/oKB/1AX...
• Torque Wrench 1aau.to/ooK/1AX...
• Drain Pan 1aau.to/oeg/1AX...
• Funnel 1aau.to/obC/1AX...
For More Info visit us at 1aau.to/h/aBK/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
![How to Replace Intake Manifold Gasket 99-03 Pontiac Grand Am [PART 1]](http://i.ytimg.com/vi/uU42QW6oqCA/mqdefault.jpg)
![How to Replace Intake Manifold Gasket 99-03 Pontiac Grand Am [PART 1]](/img/tr.png)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Great video really helpful
Young man, I'm very impressed with your talent and the quality of your instructional video. It was very professional. I have 44 years experience in auto repair and have done my intake (upper and lower) a few years back, but my sight isn't so good these days, so I decided to watch a few videos in order to refresh my memory. Yours was the best out of all that I viewed. Actually, some of them were so terribly done that I didn't have the patience to finish watching them. Great camera work and step by step instructions !
You left the air hose by the alternator open. I noticed it wasn't mentioned at all when removing the hose the went onto it. I'm trying to find out what it is to
Pontiacs are great.....good work
Thanks for watching James. Hope this upper GM 3.4 intake manifold replacement video helped you out. 1aauto.com 866-403-3393
Is there a reason why you have to wait until the plenum is completely loose before removing the throttle body? Or can I just remove the whole thing after I remove the air duct from the air filter box?
What is the top hose you moved from the top at 1:30 ish. Mines disconnected and I can't find what it is or what it goes to
+smith tyler Thank you for checking us out! The hose being disconnected is the vacuum hose. Please let us know if you have any further questions, thank you!
@@1AAuto I found the rest of the hose and reconnected it for now, thanks.
I just did this but my throttle goes straight to 7000rpms when I start it up I'm trying to figure out what I screwed up. Any ideas
Due to multiple shenanigans starting with a stuck open thermostat through a broken bolt and someone(me) who might be(definitely is) bad at drilling bolts, I have to do this swap:(
Should have lived with the stuck open thermostat
1 question? did you have to replace the manifold gasket, or is it reusable?
This is more of a case to case issue. But it's never a bad idea to replace it if you already have access to it. Thanks for watching! 1aauto.com 866-403-3393
ty i replaced the gasket!
The 2 connectors you took off in the beginning in front of the air plenum, one is white, was is that? And if it broke how to replace?
+William Blumberg If it breaks you may be able to purchase a new one from the dealer.
Mine is a 94 Grand Prix and the plenum and throttle body are one piece. I can not find what's still holding plenum on throttle body side I suspect it's the pressure regulator but can't get to it . Which is the reason I'm taking the plenum off . Can any body help
Hey how do you install the metal heater hose underneath the intake
For some unlnown reason I cannot see not 1 video on U tube which cleaely shows step by step how to get at and replace fuel injectors on a 2007 pontiac montana sv6 engine!!!!. The top of my engine has like an sheep horns vonfiguration?.. 3.9 litre engine... I see no other engine configuration like this on montanas anywhere.. why is that ?
I thought you have to torque the plenum bolts to spec?
What are the torque specs for the plenum bolts (if any)
Can I up grade to a two piece system throttle body + plenum
The hose on top of the air intake hose can someone tell me where that goes
Did you ever figure this out
What are the torque specs for the plenum bolts (if any)
According to my Haynes manual, 18 ftlbs.