Well the algorithm is in your favour and your snowrollee video popped up I watched and I subbed. Love the sense of humour. Your Fabrication skills and your a fellow Canadian CHEERS FROM MANITOBA
Another great video. Can't wait to see how you connect the vevor shaft to the electric clutch. I watched Made in Poland's electric clutch video where they used an ac compressor and tucked that away in the back of my mind in case I ever need to do something similar. Glad your merch store is live, I love my new hat! Only a Grindr away from all being gay...
I enjoy your videos. You make it look easy, so I tried a couple of new projects myself. The good news is, I fill the "swear jar" in my shop so much faster!(it costs me $.25 every time I say a word my daughter shouldn't hear, which will be used to purchase her a car when she turns 16). I've just been throwing a $20 in it every day. Most days. My skills are getting much better with use, I stay out of my wife's way(just retired), and depending on what projects I pick, my daughter might be able to forgo the car and just get a house. Have a merry Christmas!
Hey thanks Joe, keep up working a little bit each day, your skills will improved for sure! Merry Christmas to you too! Even tho I might look like a swear a lot...I don't...but that PTO shaft was something else! 🤬
@@VinyB57 I’ve got piles of bits of steel square tube n stock round pipe and tube that’s been around for decades lol it comes in handy at times forsure
I remember my family having a MTD made Bolens 20HP compact tractor on the farm, it had most of the common attachments including a snow blower which could only be used with a 3 point hitch... which was only on the rear of the tractor, it definitely wasn't fun come winter.
@@VinyB57 yeah, I wish we had a front mount like your building... I just don't know how your going to transfer power from the found belt drive to something mounted on front end loader arms. Looking forward to part Deuce... hope I said that right.
Very nice work, looking really good, but once again - you said in the build of your non gravity build, I will never use old materials again.......was that a lay, or just a figure- (like Santa Claus) of speak....? You know at this time lay- means coal in your stocking....😲 .... figur of speech- its a 50- 50 chans to get coal or soft presents....?! 😉😲😜😆 For me dont matter if I'm good or bad - for the first -Im the worlds worst dad, second I'm on the nagurty list , and have a subscription on it scene beginning of time..... Good job mate, and have a nice Christmas and Happy New Year, seen you next year! 😉😲😁
you're right...I hate using old steel...but the steel I used for the flying machine was something else...super rusted and bent in multiple ways...THAT is the material I won,t use anymore... Merry Christmas to you too!
curious if this could be re-adapted to fit an ATV like a Canam Outlander 800 hum???? dang it got me thinking now...... time to make a trip to the big box stores
only a grinder away from .... being rich, what I mean is you happen to find a safe and use a grinder to open it maybe ? no just wishful thinking on my part.. ok neverminded
Attends tu es québécois, dommage que tu a pris la lazy rout et parles en anglais pour les vues. domage jimagine que si tout les qc sur youtube parlen en anglais il va jamais avoir de viewer qc
J'adore l'expression ''lazy'' ...j'travailler 20x plus fort pour créer du contenu ''divertissent'' dans une langue que je ne maitrise pas à 100%. Faut pas non plus ce mentir, le bassin de gens qui comprennent le Qc est très réduit ( c'est juste au Qc qu'on comprend le Qc, c'est un fait!)...ajoute à cela qui la portion de gens qui apprécie du travaille manuel comme je fais, réduit encore le bassin par 20...j'veux bien passer des heures et des heures à filmer et monter des vidéos, mais si c'est pour que personne ne puissent les voir, j'aurais arrèté il y a 3 ans!...faque oui, I'm a lazy quebecor I guess! 😅
@@VinyB57 je trouve juste ca dommage oui il a bas beaucoup de c sur TH-cam mais il a très beau de youtubeur qc donc j’imagine que ça aide pas. Si tout les youtubeurs qc parlerais qc sûrement qu’il aurait plus de viewers qc
You are one hell of a machinist. Thanks for sharing!
How you dont have more subscribers is beyond me. Love your channel. You do all the right things. Keep up the great work.
Also, hope all is well with you and yours, merry Christmas and happy new year.
@@thaddeustroyer Hey thanks! I think I'm a bit unlucky with the algorythm...🤷♂
@VinyB57 sorry man, I'm trying with "tried and true" like comment and subscribe!
Well the algorithm is in your favour and your snowrollee video popped up I watched and I subbed. Love the sense of humour. Your Fabrication skills and your a fellow Canadian
CHEERS FROM MANITOBA
Génial comme projet, on attend la partie 2 !!
Merci, je travaille sur la partie 2 en ce moment meme!
Those Bercomacs are awesome. This one is even awesomer. Great project Viny!
Hey Thanks Jason and Merry Christmas!
Fantastique, rien ne t'arrête. Quel plaisir de voit ce qu'on peut faire avec de la recup, des outils... et surtout beaucoup de savoir faire 😊
Hey merci Fabien! 🤙
Great job!
thanks Tyler!
Another great video. Can't wait to see how you connect the vevor shaft to the electric clutch. I watched Made in Poland's electric clutch video where they used an ac compressor and tucked that away in the back of my mind in case I ever need to do something similar. Glad your merch store is live, I love my new hat!
Only a Grindr away from all being gay...
Hey thanks buddy! Can I use your phrase for a t-shirt! 🤣
@@VinyB57 I'd buy one
@@AustinCoulson me too 😂
I love some Viny B engineering!
This is SO good Viny, What a cool project !!!
Merry Christmas to you and yours
Thanks, merry Christman to you too!
🇨🇦 I have a Berco on my Quad, and love it. 🇨🇦
👍
I enjoy your videos. You make it look easy, so I tried a couple of new projects myself. The good news is, I fill the "swear jar" in my shop so much faster!(it costs me $.25 every time I say a word my daughter shouldn't hear, which will be used to purchase her a car when she turns 16). I've just been throwing a $20 in it every day. Most days. My skills are getting much better with use, I stay out of my wife's way(just retired), and depending on what projects I pick, my daughter might be able to forgo the car and just get a house. Have a merry Christmas!
Hey thanks Joe, keep up working a little bit each day, your skills will improved for sure! Merry Christmas to you too! Even tho I might look like a swear a lot...I don't...but that PTO shaft was something else! 🤬
Thanks Viny, another good one! 👍💪✌
Happy Holidays with family and friends.
Hey thanks and Merry Christmas to you too!
You should laminate those plates make them thicker more durable but super clean man! I get what you mean by what you have one hand!
👍
@@VinyB57 I’ve got piles of bits of steel square tube n stock round pipe and tube that’s been around for decades lol it comes in handy at times forsure
Great video and I can't wait to see part 2
I remember my family having a MTD made Bolens 20HP compact tractor on the farm, it had most of the common attachments including a snow blower which could only be used with a 3 point hitch... which was only on the rear of the tractor, it definitely wasn't fun come winter.
yay...I'm with you! But with having it at the front...It's fun when it's winter! 😉
@@VinyB57 yeah, I wish we had a front mount like your building... I just don't know how your going to transfer power from the found belt drive to something mounted on front end loader arms. Looking forward to part Deuce... hope I said that right.
Exciting, can't wait for part 2!
Earned a sub. Like the content. Can’t wait for part 2
hey thanks, I'm editing it as we speak!
Best video on internet today ❤
I don't know about that, but thanks, glad you appreciated it!
viny good job. make video series about lawn mower racer!
AAAAAhhhh... I don,t race anymore...I only made one episode on the subject! Sorry!
Voyons coli..... 😂😂😂 Merci pour tes vidéos! De Québec lanaudière!
Merci Jay!
Looking good
Thanks 👍
Great work as always
Thanks and Merry Christmas!
@@VinyB57 Happy Holidays to You and Your Family
nice project
Thanks
This is so good 👍😂
A grinder away from a safer vehicle!
A grinder is just another buffing wheel
🤣 good one!
can bolt rubber or canvas flaps on the end of the impeller to give super tight clearance.
👍I did that on my first snowblower built (the one that I disemtle at the beginning of the video), the impeller was so worn out!
Very nice work, looking really good, but once again - you said in the build of your non gravity build, I will never use old materials again.......was that a lay, or just a figure- (like Santa Claus) of speak....?
You know at this time lay- means coal in your stocking....😲 .... figur of speech- its a 50- 50 chans to get coal or soft presents....?! 😉😲😜😆
For me dont matter if I'm good or bad - for the first -Im the worlds worst dad, second I'm on the nagurty list , and have a subscription on it scene beginning of time.....
Good job mate, and have a nice Christmas and Happy New Year, seen you next year! 😉😲😁
you're right...I hate using old steel...but the steel I used for the flying machine was something else...super rusted and bent in multiple ways...THAT is the material I won,t use anymore... Merry Christmas to you too!
HAHAHA I do that SAME sht with the instructions at work all the time. I won't be needing these! Oh sht grab those outta the trash real quick bro.
i need more
You shoud have more, then!
Only a grinder away from the Smartbusa running again?
HAHAHA!!!! Yes! Next summer....project #1 on the channel!...I prom.. I mean..that's the goal! 😅
curious if this could be re-adapted to fit an ATV like a Canam Outlander 800 hum???? dang it got me thinking now...... time to make a trip to the big box stores
Glad it got you thinking...😉
That you have now it's time to set down and make my hillbilly version lol that would work on the canam.... @@VinyB57
What is your tractor?
massey ferguson 210-4, 1984
only a grinder away from .... being rich, what I mean is you happen to find a safe and use a grinder to open it maybe ? no just wishful thinking on my part.. ok neverminded
Now that s a stretch.. 😉😁
Attends tu es québécois, dommage que tu a pris la lazy rout et parles en anglais pour les vues. domage jimagine que si tout les qc sur youtube parlen en anglais il va jamais avoir de viewer qc
J'adore l'expression ''lazy'' ...j'travailler 20x plus fort pour créer du contenu ''divertissent'' dans une langue que je ne maitrise pas à 100%. Faut pas non plus ce mentir, le bassin de gens qui comprennent le Qc est très réduit ( c'est juste au Qc qu'on comprend le Qc, c'est un fait!)...ajoute à cela qui la portion de gens qui apprécie du travaille manuel comme je fais, réduit encore le bassin par 20...j'veux bien passer des heures et des heures à filmer et monter des vidéos, mais si c'est pour que personne ne puissent les voir, j'aurais arrèté il y a 3 ans!...faque oui, I'm a lazy quebecor I guess! 😅
@@VinyB57 je trouve juste ca dommage oui il a bas beaucoup de c sur TH-cam mais il a très beau de youtubeur qc donc j’imagine que ça aide pas. Si tout les youtubeurs qc parlerais qc sûrement qu’il aurait plus de viewers qc