Thanks for sharing I ve built a street mini bike, now i will try the cross one, like your I would like little more acceleration and less speed. Not sure if a non flipsky 6384 would pull well anyway, to save some money
Can u help me out. God i wish I understand electricity that well. I am good with gas, i only know basic , and i mean very very basic electrical, really all i do is trial and error till i get it working but man i would absolutely love to do this exact setup on it. . Unfortunately i dont have anyone in my life that can help me, actually dont have anyone in my life at all other then my friend orrin at work. I would be really greatful if u could point me to the parts i would need. I will use TH-cam to figure it out
Extra 🌹❤️👍👌👏🙏✋🤝😘Wow. Great view, I love to see new places 👍 Great movie 👍👋 Bravo 👋 And I have a new movie from a walk around the city 😊 Yours sincerely, DJ Janusz from Warsaw Poland 🇵🇱😘🎶🎵🙏✋
Hello, greetings from Colombia, what engine is good for a motorcycle that weighs 60kg dry weight plus the pilot that weighs 50 kilos, what engine and controller is good for me
Do you think that you could simply plug the motor where the onde was? This way you would have an adicional reduction and end up with about 35km/h and twice the aceleration
Bro san mo pala binibili yung electric bike rear wheel mo. para dun na lang din ako oorder. planning to assemble din kasi ako using your tutorial video. salamat
@@albertnario4877 thankyou sa reply sir 😁 Baka pwede naman gamitin yung sa stock board ng hoverboard sir 😅. Naka lowcost kasi ng build nyo bagay samin na gusto lang mag d.i.y. Thankyou sir. Keep sharing pa.
Very nice and simple build. Kudos! 5:38 babad sa 70amps... bottlenecked na esc mo pre. Hanggang 50amps continuous lang rated ang 4.20, tas naka foc mode pa. Dami mo nang flipsky video, sana naman padalhan ka nila ng libreng 6.6 at yung bagong release na 63100 190kv. Ano po pala diameter nung gulong?
Thanks for sharing
I ve built a street mini bike, now i will try the cross one, like your
I would like little more acceleration and less speed. Not sure if a non flipsky 6384 would pull well anyway, to save some money
Wow. That might be one of your most simple builds. Great work!
yes it is 😅
Ang lupet mo talaga master idol hehehe. Makakagawa din ako nyam 😊
makes a video putting this engine brushless on a bike like mid drive
nice poket bike project👍
Невероятно просто и результативно. И действительно почему бы и нет, интересный мотор. У нас пока в тренде моторы от гироскутера.
Can u help me out. God i wish I understand electricity that well. I am good with gas, i only know basic , and i mean very very basic electrical, really all i do is trial and error till i get it working but man i would absolutely love to do this exact setup on it. . Unfortunately i dont have anyone in my life that can help me, actually dont have anyone in my life at all other then my friend orrin at work. I would be really greatful if u could point me to the parts i would need. I will use TH-cam to figure it out
Extra 🌹❤️👍👌👏🙏✋🤝😘Wow. Great view, I love to see new places 👍
Great movie 👍👋 Bravo 👋
And I have a new movie from a walk around the city 😊
Yours sincerely, DJ Janusz from Warsaw Poland 🇵🇱😘🎶🎵🙏✋
nice
Amigo como hago para sabwr donde vebden el encendido electrónico para adaptarse a la moto de mi niño orion 49cc
Thumbnail picture change.
Grind Motor mount upside , so easy remove & fitting motor.
13s 48-54.6v fsesc4.20 Isn't that broken?
Sir ano po ung battery ninyo at san nakakabili
Que tipo de motor le puso y q accesorios le agrego
Hello, greetings from Colombia, what engine is good for a motorcycle that weighs 60kg dry weight plus the pilot that weighs 50 kilos, what engine and controller is good for me
Possible po ba na automatic starter sa pocket bikes? Hindi ung pull starter...
You could have made a hybrid where you could use a friction wheel generator that could recharge your battery while you're under gas power... 😊
lopet lodz..
How much sa battery build sir ? Pwede po ba makabili sa inyo ? Thanks.
000
00
idol nagbebenta kaba ng electric bike? gs2 ko Sana bumili para pang work ko
more videos sir.... please make a standard size motorcycle yung mas stable.
nice easy
How much cost of work?
ⁿ0ⁿ00000000
I want to put an electric starter on an 49cc motor what components i need if you can guide me a bit
Do you think that you could simply plug the motor where the onde was? This way you would have an adicional reduction and end up with about 35km/h and twice the aceleration
69 nice
Funny... You convert gas to electric. I convert electric to gas. Cost of gas is cheaper than cost of battery for me.
2 to 3yrs the total cost of your consumed gas are more expensive on my 3 battery packs.
Ang lupet mo talaga master idol hehehe. Makakagawa din ako nyam 😊
basic lang sayo yan.. haha.
can you provide me more liNKs for the battry and the throttle
down battaray..
Anung electric kit yan? Ilang volts?
Hey . Great stuff ! How do you make vesc work with throttle? What about heat from motor and vesc?
pafs pwede kb gawa vid kung pno iprogram saka wirings ng flipsky..new sub hir..tnx!
th-cam.com/video/L_6SOl4uT8k/w-d-xo.html
you use a XT60 for a 4kw Brushless?
Matindi bro! Padyak store sa shopee present
Kaya din ba kung off road testing?
Amazing! How much for the battery???
He built the battery
Any idea how???
depends on cells you pick, mine are around usd300
Secure the battery.
This is the least amount of welding needed I've seen in one of your videos 😅 awesome build, that top speed is insane
ang galing mo tlga idol. excited na din ako sa diy electric bike ko 24v 500w motor. palagi ako nanunuod sa mga gawa mo idol. da best..
good luck sa project mo, mas masarap sakyan pag ikaw may gawa ng rides mo
How much cost
What is the total cost for the kit
Bro san mo pala binibili yung electric bike rear wheel mo. para dun na lang din ako oorder. planning to assemble din kasi ako using your tutorial video. salamat
lazada or shoppe
@@albertnario4877 parehas boss. para ipag compare ko salamat ❤❤❤
Sir albert. Can you make. One wheel scooter. Like unicycle using hoverboard motors ?😅 Waiting for this build sir. Subscriber here.
maybe, pag natuto ako gumamit ng adruino 😅
@@albertnario4877 thankyou sa reply sir 😁
Baka pwede naman gamitin yung sa stock board ng hoverboard sir 😅. Naka lowcost kasi ng build nyo bagay samin na gusto lang mag d.i.y. Thankyou sir. Keep sharing pa.
@@albertnario4877 th-cam.com/video/s5Ipq0jrvkQ/w-d-xo.html parang ganito na unicycle sir. 😁😃 Baka lang naman sir. Gusto ko lang makita build mo po.
Very nice and simple build. Kudos!
5:38 babad sa 70amps... bottlenecked na esc mo pre. Hanggang 50amps continuous lang rated ang 4.20, tas naka foc mode pa.
Dami mo nang flipsky video, sana naman padalhan ka nila ng libreng 6.6 at yung bagong release na 63100 190kv.
Ano po pala diameter nung gulong?
390mm yung gulong.. bale lahat ng esc at motor Flipsky may bigay 😅
Wow very cool brother!!
i want to do that, any way i can avoid the velding??
yes, you can screw the motor mount instead welding..
ganda idol, galing mo talaga, sana mabuo ko na rin ung sakin.
Brilliant
Quedo muy bien
Napakahusay.... Astig....
hehe salamat po.
🔥 огонь
what vesc settings
auto FOC and brake center on input
@@albertnario4877 what amperage you set Max battery and the engine the rpm
@@tulioideias2992 I don't limit the erpm, 70A on battery
@@albertnario4877 friend make a video configuring the vesc 4.20 with 6384 4000w motor
@@tulioideias2992 watch my video on scooter using 6384
Where did you buy the battery?
He built it, check out his other videos