This box sounds gorgeous to my ears. Noiseless. Doesn't color the sound at all. I've been recording all sorts of microphones. Great pairing for a TLM 103. 6 months on: not a single issue. It just works.
@@gurucharanchundi I have that same combo. It can run the sm7b, but it's better with an se electronics dm-1. The cloudlifter didn't run nearly as well.
MOTU is definitely one of the best at embracing the wishes and needs of actual customers in its new product releases. They deserve a lot of credit for this.
@(T)(h)(e)(D)(u)(d)(e) I am replacing MY focusrite solo 1. because the noise is garbage. and 2. im on windows and focusrite drivers cause me to bluescreen 90% of the time i want to change my buffer or sample size. It's bad.
From my experience, Scarlet's mic preamp and latency are both pretty bad. I'm currently using RME Babyface Pro btw, but MOTU M2 seems legit, especially for the price!
MOTU has amazing customer service! After almost 4 years, the USB-C port of my M2 began acting up. I went online with MOTU support to find a way to fix it. They asked for my invoice and told me they'd replace the unit, even if it's that old! I'm totally blown away. They earned a loyal customer for life!
Gotta say that your review and that from Julian Krause encouraged me to get this. All the points that caused you concern (wobbly knobs) aren't an issue on mine, they are quite solid with little movement. The XLR input is also really tight so maybe it was just your unit and you should get a replacement under warranty? So thanks to you and Julian for a really great recommendation.
Today I learned that the Motu M4 can pickup noise from my Wifi Router and that it was the source of crackling I've had for a year. I'm thrilled I figured that out and was able to fix it, by reducing the allotted power to the 2.4 GHz radio.
I was going to purchase the highly popular Focusrite Scarlett, but this is CLEARLY the superior product, on all counts. I love your videos btw, always highly informative, by someone who actually knows what he's talking about:)
These are almost impossible to find. Every online and retail outlet is back-ordered. Walked into my local Sam Ash on Friday and they had both models! I can proudly say that I am an owner of a MOTU M4! Excellent review mate!
Most people have much better luck ordering from Sweetwater. No more than two weeks on an average to get a Motu M2 or M4 shipped out. Any where else you will be waiting for 14 weeks to several months.
@@carlosserrano3985 great to here. At least you didn't have to wait several months if you ordered it else where. A friend of mine bough his M4 from Sweetwater and gotten with in two weeks just like I did. I think Sweetwater is probably the best place to order stuff online. Just a much better experience.
I have the Motu M2. Great preamp, great interface, and just great. My main and really only complaint about it is that it doesn't have enough control. Only a gain dial, and that's it, no mute button or anything. But if you don't need that, I definitely recommend paying an extra $50 and getting this over a Scarlett Solo or something like that.
Thanks so much for this review. You got this review out so quickly, and I really appreciate that. I was about to buy an $800 interface, but this one (the MOTU M4, to be specific) has the features I really want (including an input monitor mix dial) that none of the other "entry level" interfaces have. Given the sound quality and features, I would say this device is "prosumer" not "entry level."
Your content has been super useful to me over the last few weeks, it's helped more than you can imagine. I had a full podcasting setup with PodMics, stands, 7506s, cables, and a Rodecaster - but circumstances have changed, and I needed to be ultra lightweight for travel. I have decided, in large part thanks to your content, to go for 2x AT BPHS1 headsets, running into a Motu M2 - into my laptop. I was itching for a SD MixPre3ii but it was super hard to justify the extra $$$ for a pre-revenue podcast, especially when my mics of choice are not super high fidelity anyway. I've been able to get my setup down from over 8kg + laptop to under 1.5kg + laptop. That's a MASSIVE haircut when you consider the ever decreasing carryon luggage options available. Once I get it all up and running I might make a short video about it. Keep on keeping on dude!
Hi! I'm looking to get an Audio Interface for recording Audiobooks and Voiceovers. This is a home set-up with a Windows 10 laptop, in an untreated room. So, Can use only Dynamic Mics like SM58 or Rode Procaster. CLEAN PREAMP GAIN and LOW NOISE is prime requirement. I've shortlisted the Audient ID4 MK II and the MOTU M2. Both are at same price here in Mumbai, India. The additional mic input in the M2 is useful in case i decide to work on two person narration or interviews. Which would you recommend? Thanks in advance!
You are an absolute gem, sir! I stumbled across your channel when looking for an interface! I plan to get the Shure SM7B and wanted to get a cheaper alternative to the $500-1000 price tag of so many audio interfaces/mixers. I found this guy on Reddit attached with your review and was sold immediately! You are amazing for not only being hilarious-- but also accurate, thoughtful, and explanatory of all the nerd info as well as the legitimate pros and cons of the MOTU M2. Thank you so freaking much. You are awesome!!! Subscribed too! ♥
Just one small tip for loopback use in Logic. Set input to 5-6(or 7-8), and set output to 3-4 then you will be able to record loopback in Logic Pro X. I spent several hours to find this(maybe I'm stupid enough).
After thinking about it for month and month, I finally pulled the trigger on the MOTU M4. I was thinking a lot about wether I need The M4 or if I should get a full out 4 channel interface, and in the end, the M4 would give me some features, that I really like. The line ins3 and 4, which I could use with - say - two DBX 286S, if I should ever need the additional mic inputs, or maybe for a stereo input. The Mix dial is another thing I sometimes love to use. But the completely digital controls for all inputs and outputs is the most important feature for me. I like hardware controls for fast changes, but I like digital controls for giving me the most control. Digital controls for the knobs is a genius move by MOTU and I really hope, more companies will pick that up in the future. Your review supported me in my decision process in terms of the sound and for that, I thank you! Just one thing: In my books loop back isn’t exactly preferable on stream. At least, it doesn’t fix the problem many people have, leveling their audio correctly.
Great in-depth review and you just convinced me to buy it. I was originally going for the Focusrite Studio Set and decided to give up that package deal for this. The mics can wait, what I need is a superior audio interface right now that will last me a while and I'm convinced that this is the one. Subscribed by the way, I like how well you tested the device. Cheers.
just tested my motu m4.. way way more clarity than my previous interface with 109db Dac dynamic range. I re listened to my mix. these are my comments: very nice stereo image, clarity is superb, i notice the depth which my previous interface doesnt have. I also notice some details like finger noise of acoustic guitar.. Dont ever buy lesser specs interface.. it just a waste of money. better yet sell your old one and upgrade to this one.
Really informative and entertaining videos! With most of the world on lockdown, aspiring musicians and content providers need to up their game on home studio capabilities. Knowledge is power. Subbing!
I’m trying out the M4, partly because of this stellar review of the M2. I haven’t been able to find a negative review, actually. I was a little concerned about the loose knobs and XLR ports that you mentioned as one of its only negatives, but the unit I received doesn’t have that issue. The XLR ports are tight and the knobs are sturdy with a nice resistance to them. I wonder if they fixed the issue since the release date based on feedback. Anyway, thanks for the review.
You probably have a V2 which is made in china with slightly newer components, your MOTU software should say firmware version 2.0.* which means it's a v2, it would say 1.0.* if it was a v1 (assembled in USA, slightly older components). I had both and the wobble is noticeable on the USA version, while the Chinese version is super tight.
@@duvels86 That's great to hear, that's my beef with US manufacturing, it's nice and all but super inconsistent and sometimes problematic, my current is a V2 made in USA, works great for months now
@@BadEmpanada I always find that any mic i use on it sounds much to flat compared to the behringer umc404hd i bought for podcasting. At least I can speak to the longevity of the scarlett solo and its dials. Btw love your channel!
Encoders and connectors on my MOTU Ultralight mk4 are wobbling too, but never miss a connection or skip values, so i guess it is some specific about their encoders and potentiometers manufacturer. I'am using my Ultralight mk4 every day for more than a year without any problem, so this wobble is not a fragility. Another thing which you can add as missing is that there is no lock on XLR. You can find it on their higher grade models. I believe preamps and DAC/ADC on M2 are the same as on my ultralight mk4 and they are best ones i have ever used. Previously, a have used a Focusrite Saffire Pro 14, Scarlett 2i2 mk2 and Steinberg UR22 mk2. This one outperforms all of them easily. Nobrainer for less than $200.
THANKS!!! Been postponing getting a Focusrite Scarlett 2i4 Gen 3, waiting to find REAL reviews of the new M units by MOTU. This exceeds my expectations, thanks! Not sure if the woobly buttons could become problematic (digital dirt noise), and same with the inputs. Will have to consider, but so far MOTU just positioned itself in the fast lane for entry-level audio interfaces.
Ohhhhh hell yeah!!! I'm buying this just for the REAL metering!!! Finally somebody gets it right!!! Oh snap...Loopback too??!! WAIT! There's a power switch??!! SOLD!!!
Earl, I continue to be amazed that other companies have not yet figured out metering = good. I mean REAL metering like you refer to and like MOTU has included in this unit. At least PreSonus' new units have REAL-ish metering as well. Other manufacturers, please add REAL metering. They are desirable and a REAL selling point.
@@billlord4203 I couldn't agree with you more my friend! Three colors of flashing LED's really don't cut it. We can't expect the best results when we play it by ear.
And the most IMPORTANT thing you haven`t mentioned MOTU M2 has dynamics 120 dB on the output and ESS Sabre32 Ultra DAC Technology!!! (Focusrite Scarlett 8i6 3gen shit only 108dB with narrow, thin but clean plastic sound and castrated bass - I sold it after month)
Cześć, jak się ma jakość dźwięku do karty Asus Essence STX? Pytam, bo ją mam (STX) i jest super - ale na AMD AM4 są z nią straszne problemy, o czym nie wiedziałem przed zakupem; mam też DAC FiiO K5 Pro - tu jakość jest niestety dużo gorsza.
@@WojciechKobus Orientuje się bardziej w interfejsach audio niż w pojedyńczych DACach typu dragonfly itp. Asusa nie biore pod uwagę jako sprzętu audio / muzycznego. Polecam Universal Audio Apollo Twin... Jakość dźwięku bezdyskusyjna. Zrobiłem live test wielu interfejsom motu m2 jest ok, ale przeszkadza mi w nim nieco "ciemny, mroczny i zimny dźwięk".. universal audio rozłożyło na łopatki, wyżej jest tylko Prism Sound ale to już po kilka tys EUR
I was looking for an audio interface for myself, and I had not even considered MOTU because the only exposure I had from them were their high end products. This review made my mind up, going to grab this little guy now. Thanks!
I bought one of these on a whim, since it was class compliant and didn't have the web browser mixer like the higher priced units from MOTU. I didn't buy it for iOS products, but for use in a Linux Environment. I am running Manjaro XFCE 18.1.3 with success. It records clearly, and sounds excellent. I can tell you that I am beyond happy for what I need it for. To be honest, I didn't notice any wobble in the knobs until I watched this video, but I don't see any wiggle in the XLR jacks on mine. Overall, it is a steal at $170!
Got mine today and definitely ordered through your link to Sweetwater. Even put you in the registration as the user I learned about it from. Did Motu ever respond with saying they were going to tighten the knobs and connections? Mine are all rock solid and have zero wobble. Nearly the same as my iD4 in build quality. I was 🤏🏽 to buying a used iD14 I. Ebay before seeing your vid. Also, the hoodie I ordered from your shop saved me from a sound out 4 inch holesaw bit. So thanks for that too.
Yea ive looked at all and went motu m2, has everything i need and the ess dac is super fucking clean im blown away by the clarity, my friend has the Apollo twin and very close in sound quality
Recently decided that I would start doing VO. Came across your channel and I love it!! Was going to get the Focusrite Scarlett but landed on this due to your review, well the M4. No M2s available but B&H somehow had an M4 so benefit: an input monitor mix; also snagged the Lewitt 440. All the M4's dials are super solid so it seems Motu has fixed that wobble issue you pointed out, I'm giving all the credit to you for that one haha. Super excited to where this goes. Keep up the excellent work Bandrew!
I’ve noticed that my motu doesen’t have an instrument button so it automatically detects my guitar signal but sometimes it doesen’t work unless i make the gain peak. Why does it just not have a button? How do i fix this?
@@Issa.mp3 comment this on the actual video instead of on a reply to some other comment, your comment is irrelevant here so put it in the actual comment section
@@pineapplej7310 As a matter of fact i did aswell as here. It's funny cause ur the only one who replied so it obviously working. I thaught that maybe a kind soul could help a brother out but apparently all i get is someone making an even less irrelevant reply to my question. The person who wrote this comment seemed like they knew a thing or two as they have a channel focused on sound. Does it even matter what i do? is it even ur busssines? No + this person seemed like a girl, as i knew that some people be simping for good looking girls, i kinda knew that someone would click on her comment and look through her replys. That way i could get help :).
Thank you for featuring this interface. I was very intrigued when this model was released. It has just about everything needed. Cheers to an on and off switch, proper metering and MIDI!
Individual 48v & monitoring, as well as loopback #Hype Awesome option! I would have picked this up if it had been available when I was looking for my first interface!
OH BABY!! My local music store was only place in Canada that I could see got it in today! Bought the only unit they had.....plugged it in and WOW what a thing of beauty. Using Maschine on Windows and loving the loopback feature !!
Would love if Bandrew would tell me why he doesn’t use this currently? I own it and love it but I’m just curious why u still use the Scarlett in current videos after giving this one such a glowing review? Did it not hold up well?
there is a podcast ep where he already answers this question. but it basically boils down to consistency. in order for the review to be consistent with the audience watching it, he uses Focusrite as a base guide as to how will the microphone sound on an entry-level interface, so everyone will have an idea on how it will sound
You should be getting a special christmas present from MOTU. This fantastic video made my decision for purchasing the M2 months ago and I can't be happier with it.
Mine's in the mail and it's competitive to get one, they're getting snatched up pretty fast! Good job sharing the features... you make me excited about getting my system going! It was listening to members of Boulder Guitar Society on Zoom and a discussion of the better sound one can get with a good interface (rather than the bloody computer!) that had me discovering the M-2. Stat-wise it looked like a winner and from our perspective it Sounds Good too!
so.. comparing 2i4, M4, and audient's iD14, which one is the best? Edit: so my use case would be (1) recording a grand piano in a small studio; (2) recording a nicer grand piano in a large chapel hall; and (3) recording choir ensemble singing in the same large chapel hall. The microphones are a pair of rode M5. Edit 2: the use cases I have seem to point me to the cheaper version with just 2 inputs (that is, 2i2 and M2) but I put the 4-in 4-out versions here so the comparison against iD14 is more of apple-to-apple comparison.
universal audio apollo (if you got the $$$). definitely unnecessary for podcast but excellent for music, but this one definitely can compare at this point especially for the price
Thanks for the great reviews.. I got the M2 even if more expensive... installation and operation seamless (w10, i3 intel laptop) . Quality excellent despite the level of recording was surprisingly moderate - but I am using dyn mic (entry level) and compensated in the DAW. The meters were indeed very practical when deciding the gain Again thanks!!
though... does this imply corner-cutting in the materials/components that they use? (I am assuming US labor prices are quite high and the M2 is selling at the price of a 2i2 which is made with much less manual labor costs.)
@@patchybeardopinions9340 I concur with that, but my point is that to compensate for the increased spending in manual labor, they have to use less expensive components, no? (Would like to be wrong about this of course XD)
I really like the features of this interface, and it looks like it has really nice preamps. For my own use I'd get the M4 and plug a mixer into channels 3 and 4 and use channels 1 and 2 direct, giving me the flexibility to use microphones directly with the interface and plug all sorts of stuff into the mixer if I wanted to.
@@woothepoo9397 A physical mixing board, something with nice preamps, that I can plug into the M4 and then have the option of going direct into the interface or going into the mixer then into the interface.
The audio loop back ALONE is one of the best features of this, period. I hate switching between my mobo to sample stuff with stereo mix from online. Thanks for the review. It helped me a lot. I came back years later to say that this device has given me nothing but problems for the entire time I've had it, and Motu support is absolutely terrible. The driver gives me blue screens on Windows 11, sometimes the device just turns off, sometimes it makes a loud screech then stops, and Motu does nothing to help it.
@Redpill Progressive I record vocals and instruments, for me the A/D convertors and mic pre-amps in the ID14 are way more important than some perceived frequency
I don't see any correlation between that kind of motion and build-quality issues. You pay extra for shock-mounting. It's just not by itself worth doing more than asking if it's a bonus or not. You don't know until somebody tells you..
For what it's worth, the early feedback on Gearslutz from people who've already purchased was that this comment about the knobs was a head scratcher to them. They said it felt really solid. They could be shills, but I don't think so.
First of all thanks for all the review you've done, I can't thank you enough for that, and especially for this MOTU M2 interface I've had since monday 16th. This one is a major upgrade compared to my Focusrite Scarlett solo 2nd gen, paired with the Mogami 2534 Quad XLR cable, the AT2020 and attached with the Blue Compass Boom Arm. I really appreciate it and I wish you the best, merry christmas and a happy new year !
Got an SM7B recently and even though they are selling out constantly right now I managed to snag a MOTU M2 as well. The SM7B is such a great sounding mic and with the Motu m2 being a decently inexpensive interface with a high quality build and sound that gives just the right amount of clean gain for it makes for such a great combo.
Did you buy the motu M2? I have it and I want buy the SM7B, I am french so 'im want to be sure to understand well, when he is testing it on vidéo, he put knob at 3 o clock then 6 o clock and the motu seem to deliver enough power to drive the sm7b without having background noises etc. So it's all i need? i mean, it would be useless to have a cloudlifter?
I was gonna ask for this review. You already had a video up before I had time to ask the question, impressive! A shootout for sub-200$ audio interfaces incl. latency values and preamp noise would be cool af, especially Focusrite vs MOTU vs Steinberg vs Behringer vs Presonus vs M-Audio vs Native Instruments 😁🤣 Kinda kidding although it would be super shootout lvl. Great job man, keep it up!
Watched the video because I trust your gear reviews. My current interface is dying and I'm considering this one. Writing a comment because I loved the Dr. Who reference. Thanks for these great videos. Don't blink!
An update to my comment below. I received an early Christmas gift.. the Motu M4.. and a Dbx 286... based on your videos (as well as another YTuber).. All I can say is.. HOLY Crapola, WOW!!!! What a huge difference in sound from a single Scarlet Solor and to now with the 286 and the Motu. The 286 really let me quiet down some low end noise and the Motu for 2nd-ary amping if needed. Did I say wow? The 286 appears to be lowering my sound floor to incredibly quiet sounding (or lack there of sound). Podcastage, thanks for you reviews they have become invaluable and handy when trying to decide what to buy. Oh, and please don't chuck that red smoking jacket, it's stylish! haha
Great review - thank you - was never quite happy with my Scarlett 2i2 3rd Gen (did a great job, but not quite happy). So after this review I bought the Motu M2. Had initial problem with intermittent connection / noise using a high speed USB C cable - but switched to the cable supplied in the box and all is good - I found the M2 noticeably cleaner with lower noise floor. - For some reason has easier and more reliable selection of inputs in DAWs (Audition and Da Vince Resolve on M1 Mac). - The on/off button so much more convenient. - The level indicator so much quicker and more accurate to set esp when setting up for quick Zoom or Teams meet (I can get it spot on within a second or so before going live). - And it has separate 48v Phantom Power for each channel so I can connect dynamic and condenser mics at same time - Clean on a 48v Sennheiser condenser and more than enough power for Sure SM58 with less noise than the Scarlett. - Sold the Scarlett and never looked back
I was considering the motu m2 as its specs are probably the best I have seen at its price point, but I am bit concerned that it might unstable with windows 10 (based on user comments I have seen in forums). How are people finding with Windows 10? Is it a good experience.
Excellent in-depth feature and spec review. Honest opinions and great real-time audio demos. Extremely helpful and much appreciated. Just ordered one based on this and numerous other reviews.
Just picked up the M2 based on your Review. Use to use the Rode AI-1 based off your reviews. So far it is super clean input. The headphone amp is a little lower powered compared to the Rode. But the meters are pretty cool. Still learning all its tricks
Unboxing videos - arrrgghhh. There are actually tutorials on how to improve "your" unboxing channel. I'd say drive a kabar dead center into the box. How's that for ya chumps?
Hey, this guy is a really good gear reviewer! Just bought the M2 based on Josh at Sweetwater recommendation. This review just confirms, and thats nice.
You absolutely launching the box made my crappy day into a good one lol. Cheers. Also the video was very clear and informative. Thanks for helping to solidify my decision to get this interface! :)
The “Fun, Interesting or Helpful” combo had me rolllinnnn & I had to instantly hit subscribe after that 😂🤣 Honestly a great review as well, very helpful. Thank you!
I just ordered an M4! I currently have an Arturia MiniFuse 2 and a UA Volt 2 here for testing, but I'm not completely satisfied with them. The MiniFuse has the monitor mix dial but can't drive my 600 Ohms DT 880 headphones loud enough when doing direct monitoring (less power on the output and additional output loss when blending with the computer audio). The Volt 2 sounds a tiny bit crisper, gets loud enough on the headphones out, but it misses the monitor mix dial and I couldn't get the provided plug-ins activated. Because the M2 also doesn't have the mix dial, I didn't consider a MOTU. Until I realized that the M4 has one and is just a bit more expensive. Now I found one second-hand in mint condition for under 200 bucks and couldn't resist.
The last time I saw you get excited over an interface was Universal Audio’s Arrow, and the only con was the price tag! If you were to choose, which one would you keep and why?
Also, thank you for this review. I will be returning my Scarlett 2i2 3rd gen back to Guitar Center, and ordering myself a Motu M2! This was extremely helpful!
The audio RTL is a bit lower on M4 compared to my 2i2 2nd gen.. 6.8 vs 9 ms. This difference though small is perceptible. However I can get the virtual instrument latency on the 2i2 to be lower than the M4 due to the 2i2 allowing for more sample size options (3.25 vs 5.33 ms). This difference is virtually imperceptible, however it is nevertheless disappointing.
I am waiting for mine to arrive next week. I hope to get slightly better latency on it compared to my Scarlett 2i2 2nd gen, otherwise I will have to return it, and save up for the Quantum 2.
@@h.hristov I'm keeping the M4 alongside my 2nd gen Scarlett 2i2. In terms of RTL for virtual instruments I can get a little bit lower figures on the 2i2, which is disappointing. However, the audio input latency is significantly lower on the M4 and therefore I am getting 2.2 ms less audio RTL with it. With my setup (an i7 laptop) I can get the audio RTL to be as low as 6.8 ms compared to 9 ms on the 2i2. In terms of virtual instrument latency, I can get the 2i2 to go as low as 3.25 ms (96kHz @ 104 sample size) while the m4 can go as low as 5.33 ms. In practical terms the difference between 3.25 ms and 5.33 ms is practically imperceptible. The audio round trip latency difference between 6.8 ms and 9 ms is more significant.
That is a very clean looking interface. The UI seems nice, but could use improvement on it for sure. I really like how they they organized the two XLR/TRS inputs
Just bought the M2 based on this glowing review amongst others. I can report that it is well made, works well with Windows 10 and has good latency, but compared to the 20 year old Digidesign M Box 1 it replaced, it is sonically inferior. The M2 has a very small sound stage and bring vocals very much to the front of the mix. I have over 30 years in audio electronics engineering and have worked for Roland, Yamaha, Alesis, korg etc as well as being involved in DAC electronics design. The moral of the story is, don't be fooled by the great noise, distortion and sampling frequency figures, as they don't necessarily translate to good audio quality - You need to demo what you buy and don't discount used classic gear with lesser spec (all you really need is 24 bit 48KHz for pro audio applications). I recomend older Crystal or Burr Brown DACs over newer ESS etc.
Your comment about the better quality of the Digidesign MBox 1 really caught my attention. Do you think all interfaces with the ESS DAC sound similar? Cuz I've heard that there is pretty much of a difference in sound between the M-line and the Ultralite line while they got the same ESS converter. Also heard people in general praising the ESS sound, some say the M2 and M4 sound much better than the Focusrite. I'm interested in the Ultralite units, however which similar audio interfaces would you personally recommend?
@@proudpolishherbsman2583 I don't know about other boxes using ESS technology, but certainly IMO the M2 and M4 sound inferior to the M boxes. Other recent interfaces I've tried like Presonous also sound inferior.
Couple of weeks later, but I noticed some very faint intermittent crackling in my Scarlett today and I thought of your video. Motu M2 on the way. Thanks for the great reviews as always.
Update in case anyone ever reads this in the great archives of the internet. I got this. Came home early from work just so I could sign for it from FedEx. Fired it up... and the direct monitor faulty. It sounds like I'm 500 miles away whispering in a cathedral, and tested it with multiple headphones. It's heading back. I'm sure I just had one in a million bad luck, but I didn't need all those bells and whistles anyway. Ordered an Audient iD4. Them's the breaks.
This box sounds gorgeous to my ears. Noiseless. Doesn't color the sound at all. I've been recording all sorts of microphones. Great pairing for a TLM 103. 6 months on: not a single issue. It just works.
hi, how is it now, im getting it with a shure sm7b and would like to know how the performance has been, any durability issues? thanks!
Guru Charan No issues. Very solid, reliable device.
@@gurucharanchundi I have that same combo. It can run the sm7b, but it's better with an se electronics dm-1. The cloudlifter didn't run nearly as well.
are you using it with macos or windows?
@@renatorod94 I record to a windows machine.
MOTU is definitely one of the best at embracing the wishes and needs of actual customers in its new product releases. They deserve a lot of credit for this.
"I don't need it, I definitely don't need it."
*Looks at my Focusrite with visual hate*
"I NEEEEEEED IT!!!!!"
@(T)(h)(e)(D)(u)(d)(e) I am replacing MY focusrite solo 1. because the noise is garbage. and 2. im on windows and focusrite drivers cause me to bluescreen 90% of the time i want to change my buffer or sample size. It's bad.
same here..too bad i have to sell my 2nd gen 2i2..3rd gen is a total cash grab trash..f*ck focusrite
From my experience, Scarlet's mic preamp and latency are both pretty bad. I'm currently using RME Babyface Pro btw, but MOTU M2 seems legit, especially for the price!
Bummer, works flawlessly on Mac, I use it all day for a variety of tasks.
TreekTheNeet dame here
MOTU has amazing customer service! After almost 4 years, the USB-C port of my M2 began acting up. I went online with MOTU support to find a way to fix it. They asked for my invoice and told me they'd replace the unit, even if it's that old! I'm totally blown away. They earned a loyal customer for life!
Solid State Logic SSL2 better than motu m2?
@@menshealth870 it depends on what you need. The Motu has output meters, but the SSL2 has more outputs.
@@RKGonzo2I want to sing my songs. I won't connect the guitar. I have a condenser microphone
I wasn't sure but the inclusion of "Big Fish Audio" really sold me.
Ahahaha. Patrick you character.
@@Podcastage Motu m2 or audient Evo 4. Kindly suggest.
@@spicyyetumami absolutely motu m2.
Ramgopal Sharma why so?
Actually I was surprised to see that Big Fish Audio was still around as I hadn't seen that name since 2005ish.
Dang bought the last one on Amazon as soon as I saw it, came back to TH-cam to find out everyone loves it! That's a validating feeling.
Gotta say that your review and that from Julian Krause encouraged me to get this. All the points that caused you concern (wobbly knobs) aren't an issue on mine, they are quite solid with little movement. The XLR input is also really tight so maybe it was just your unit and you should get a replacement under warranty? So thanks to you and Julian for a really great recommendation.
Today I learned that the Motu M4 can pickup noise from my Wifi Router and that it was the source of crackling I've had for a year. I'm thrilled I figured that out and was able to fix it, by reducing the allotted power to the 2.4 GHz radio.
So this review is 4 yrs old - how has it held up in that time? Any new info w/updates? Still a solid buy for under $200?
I was going to purchase the highly popular Focusrite Scarlett, but this is CLEARLY the superior product, on all counts. I love your videos btw, always highly informative, by someone who actually knows what he's talking about:)
These are almost impossible to find. Every online and retail outlet is back-ordered. Walked into my local Sam Ash on Friday and they had both models! I can proudly say that I am an owner of a MOTU M4! Excellent review mate!
thats crazy, can i borrow it when ur done?
I got a Motu M4 And I love it, the word is spread that's why is very difficult to get one, I have to wait a month for mine.
Most people have much better luck ordering from Sweetwater. No more than two weeks on an average to get a Motu M2 or M4 shipped out. Any where else you will be waiting for 14 weeks to several months.
@@eman0828 I ordered mine on Sweetwater and still have to wait a month but it worth it, I'm happy with mine.
@@carlosserrano3985 great to here. At least you didn't have to wait several months if you ordered it else where. A friend of mine bough his M4 from Sweetwater and gotten with in two weeks just like I did. I think Sweetwater is probably the best place to order stuff online. Just a much better experience.
I have the Motu M2. Great preamp, great interface, and just great. My main and really only complaint about it is that it doesn't have enough control. Only a gain dial, and that's it, no mute button or anything. But if you don't need that, I definitely recommend paying an extra $50 and getting this over a Scarlett Solo or something like that.
Thanks so much for this review. You got this review out so quickly, and I really appreciate that. I was about to buy an $800 interface, but this one (the MOTU M4, to be specific) has the features I really want (including an input monitor mix dial) that none of the other "entry level" interfaces have. Given the sound quality and features, I would say this device is "prosumer" not "entry level."
Your content has been super useful to me over the last few weeks, it's helped more than you can imagine. I had a full podcasting setup with PodMics, stands, 7506s, cables, and a Rodecaster - but circumstances have changed, and I needed to be ultra lightweight for travel.
I have decided, in large part thanks to your content, to go for 2x AT BPHS1 headsets, running into a Motu M2 - into my laptop. I was itching for a SD MixPre3ii but it was super hard to justify the extra $$$ for a pre-revenue podcast, especially when my mics of choice are not super high fidelity anyway. I've been able to get my setup down from over 8kg + laptop to under 1.5kg + laptop. That's a MASSIVE haircut when you consider the ever decreasing carryon luggage options available. Once I get it all up and running I might make a short video about it.
Keep on keeping on dude!
Hi!
I'm looking to get an Audio Interface for recording Audiobooks and Voiceovers. This is a home set-up with a Windows 10 laptop, in an untreated room. So, Can use only Dynamic Mics like SM58 or Rode Procaster. CLEAN PREAMP GAIN and LOW NOISE is prime requirement.
I've shortlisted the Audient ID4 MK II and the MOTU M2. Both are at same price here in Mumbai, India. The additional mic input in the M2 is useful in case i decide to work on two person narration or interviews.
Which would you recommend?
Thanks in advance!
They must have fixed the Wobbly knobs and inputs since you made this, mine has solid knobs.
Love this response❤
You are an absolute gem, sir! I stumbled across your channel when looking for an interface! I plan to get the Shure SM7B and wanted to get a cheaper alternative to the $500-1000 price tag of so many audio interfaces/mixers. I found this guy on Reddit attached with your review and was sold immediately! You are amazing for not only being hilarious-- but also accurate, thoughtful, and explanatory of all the nerd info as well as the legitimate pros and cons of the MOTU M2. Thank you so freaking much. You are awesome!!! Subscribed too! ♥
Just one small tip for loopback use in Logic. Set input to 5-6(or 7-8), and set output to 3-4 then you will be able to record loopback in Logic Pro X. I spent several hours to find this(maybe I'm stupid enough).
Thank you so much! I spent days searching. I will try it now.
After thinking about it for month and month, I finally pulled the trigger on the MOTU M4. I was thinking a lot about wether I need The M4 or if I should get a full out 4 channel interface, and in the end, the M4 would give me some features, that I really like. The line ins3 and 4, which I could use with - say - two DBX 286S, if I should ever need the additional mic inputs, or maybe for a stereo input. The Mix dial is another thing I sometimes love to use. But the completely digital controls for all inputs and outputs is the most important feature for me. I like hardware controls for fast changes, but I like digital controls for giving me the most control. Digital controls for the knobs is a genius move by MOTU and I really hope, more companies will pick that up in the future. Your review supported me in my decision process in terms of the sound and for that, I thank you! Just one thing: In my books loop back isn’t exactly preferable on stream. At least, it doesn’t fix the problem many people have, leveling their audio correctly.
Great in-depth review and you just convinced me to buy it. I was originally going for the Focusrite Studio Set and decided to give up that package deal for this. The mics can wait, what I need is a superior audio interface right now that will last me a while and I'm convinced that this is the one.
Subscribed by the way, I like how well you tested the device. Cheers.
I bought my M2 based on this review. It really is a great product.
just tested my motu m4.. way way more clarity than my previous interface with 109db Dac dynamic range. I re listened to my mix. these are my comments: very nice stereo image, clarity is superb, i notice the depth which my previous interface doesnt have. I also notice some details like finger noise of acoustic guitar.. Dont ever buy lesser specs interface.. it just a waste of money. better yet sell your old one and upgrade to this one.
All critical components proudly made in China. They make the best stuff today.
Really informative and entertaining videos!
With most of the world on lockdown, aspiring musicians and content providers need to up their game on home studio capabilities. Knowledge is power.
Subbing!
I’m trying out the M4, partly because of this stellar review of the M2. I haven’t been able to find a negative review, actually. I was a little concerned about the loose knobs and XLR ports that you mentioned as one of its only negatives, but the unit I received doesn’t have that issue. The XLR ports are tight and the knobs are sturdy with a nice resistance to them. I wonder if they fixed the issue since the release date based on feedback. Anyway, thanks for the review.
You probably have a V2 which is made in china with slightly newer components, your MOTU software should say firmware version 2.0.* which means it's a v2, it would say 1.0.* if it was a v1 (assembled in USA, slightly older components). I had both and the wobble is noticeable on the USA version, while the Chinese version is super tight.
@@AstuteJoe great info. Thanks. Mine did arrive with software 2.0
@@AstuteJoe I got a M4 v1 and the knobs and XLR's don't have the issue as mentioned in this review either.
@@duvels86 That's great to hear, that's my beef with US manufacturing, it's nice and all but super inconsistent and sometimes problematic, my current is a V2 made in USA, works great for months now
This sounds like a good upgrade from my Scarlett solo! I've always had trouble with proper gain levels.
@@BadEmpanada I always find that any mic i use on it sounds much to flat compared to the behringer umc404hd i bought for podcasting. At least I can speak to the longevity of the scarlett solo and its dials. Btw love your channel!
Encoders and connectors on my MOTU Ultralight mk4 are wobbling too, but never miss a connection or skip values, so i guess it is some specific about their encoders and potentiometers manufacturer. I'am using my Ultralight mk4 every day for more than a year without any problem, so this wobble is not a fragility. Another thing which you can add as missing is that there is no lock on XLR. You can find it on their higher grade models.
I believe preamps and DAC/ADC on M2 are the same as on my ultralight mk4 and they are best ones i have ever used. Previously, a have used a Focusrite Saffire Pro 14, Scarlett 2i2 mk2 and Steinberg UR22 mk2. This one outperforms all of them easily. Nobrainer for less than $200.
THANKS!!! Been postponing getting a Focusrite Scarlett 2i4 Gen 3, waiting to find REAL reviews of the new M units by MOTU. This exceeds my expectations, thanks! Not sure if the woobly buttons could become problematic (digital dirt noise), and same with the inputs. Will have to consider, but so far MOTU just positioned itself in the fast lane for entry-level audio interfaces.
Ohhhhh hell yeah!!!
I'm buying this just for the REAL metering!!!
Finally somebody gets it right!!!
Oh snap...Loopback too??!!
WAIT! There's a power switch??!! SOLD!!!
Earl, I continue to be amazed that other companies have not yet figured out metering = good. I mean REAL metering like you refer to and like MOTU has included in this unit. At least PreSonus' new units have REAL-ish metering as well. Other manufacturers, please add REAL metering. They are desirable and a REAL selling point.
@@billlord4203 I couldn't agree with you more my friend! Three colors of flashing LED's really don't cut it. We can't expect the best results when we play it by ear.
And the most IMPORTANT thing you haven`t mentioned MOTU M2 has dynamics 120 dB on the output and ESS Sabre32 Ultra DAC Technology!!!
(Focusrite Scarlett 8i6 3gen shit only 108dB with narrow, thin but clean plastic sound and castrated bass - I sold it after month)
Cześć, jak się ma jakość dźwięku do karty Asus Essence STX? Pytam, bo ją mam (STX) i jest super - ale na AMD AM4 są z nią straszne problemy, o czym nie wiedziałem przed zakupem; mam też DAC FiiO K5 Pro - tu jakość jest niestety dużo gorsza.
@@WojciechKobus Orientuje się bardziej w interfejsach audio niż w pojedyńczych DACach typu dragonfly itp. Asusa nie biore pod uwagę jako sprzętu audio / muzycznego. Polecam Universal Audio Apollo Twin... Jakość dźwięku bezdyskusyjna. Zrobiłem live test wielu interfejsom motu m2 jest ok, ale przeszkadza mi w nim nieco "ciemny, mroczny i zimny dźwięk".. universal audio rozłożyło na łopatki, wyżej jest tylko Prism Sound ale to już po kilka tys EUR
The latency and the driver controls makes it so far ahead of anything in that price range - wow! just wow
I was looking for an audio interface for myself, and I had not even considered MOTU because the only exposure I had from them were their high end products. This review made my mind up, going to grab this little guy now. Thanks!
*Impressed by the -73 db noise floor on the preamp. However, having a pro dedicated preamp is always better. Also, I really like the display screen.*
What's a pro dedicated preamp?
What pro dedicated preamp do you recommend
@@_Trakman *Warm Audio WA73-EQ* www.sweetwater.com/store/detail/WA73EQ--warm-audio-wa73-eq-microphone-preamp-and-eq
@@_Trakman wait for Symphony Desktop or some Universal Audio stuff like Twin/Solo/Arrow.
@@DarkPa1adin thanks
I bought one of these on a whim, since it was class compliant and didn't have the web browser mixer like the higher priced units from MOTU. I didn't buy it for iOS products, but for use in a Linux Environment. I am running Manjaro XFCE 18.1.3 with success. It records clearly, and sounds excellent. I can tell you that I am beyond happy for what I need it for. To be honest, I didn't notice any wobble in the knobs until I watched this video, but I don't see any wiggle in the XLR jacks on mine. Overall, it is a steal at $170!
Thanks for the info about Linux compatibility. Did not know it is class compliant, it is a great addition to any Linux PC then!
@@VitalyPashkov agreed! I am using it in Manjaro with Jack and it works great. I am glad I went on a limb to try it out.
Got mine today and definitely ordered through your link to Sweetwater. Even put you in the registration as the user I learned about it from. Did Motu ever respond with saying they were going to tighten the knobs and connections? Mine are all rock solid and have zero wobble. Nearly the same as my iD4 in build quality. I was 🤏🏽 to buying a used iD14 I. Ebay before seeing your vid. Also, the hoodie I ordered from your shop saved me from a sound out 4 inch holesaw bit. So thanks for that too.
Please make this versus series. Motu m2 vs Audient id4 vs presonus audio box vs scarlet 3rd gen
what for, it is clear that Motu is a winner
Yea ive looked at all and went motu m2, has everything i need and the ess dac is super fucking clean im blown away by the clarity, my friend has the Apollo twin and very close in sound quality
Channel called discontinued made a vs. And picked motu
@@krauselee877 how is mic preamps?
@@WarerBrow really low noise
I'm blown away not only by the interface
But also because you slapped the bass
That realtime metering is what would sell me. I mean, that's seriously awesome and super useful.
Recently decided that I would start doing VO. Came across your channel and I love it!! Was going to get the Focusrite Scarlett but landed on this due to your review, well the M4. No M2s available but B&H somehow had an M4 so benefit: an input monitor mix; also snagged the Lewitt 440. All the M4's dials are super solid so it seems Motu has fixed that wobble issue you pointed out, I'm giving all the credit to you for that one haha. Super excited to where this goes. Keep up the excellent work Bandrew!
Quiet talker -> addressing ASMRtists. 😁 Thank you very much for such an in-depth overview. It helped alot!
тоже m2 купили?
I’ve noticed that my motu doesen’t have an instrument button so it automatically detects my guitar signal but sometimes it doesen’t work unless i make the gain peak. Why does it just not have a button? How do i fix this?
@@Issa.mp3 comment this on the actual video instead of on a reply to some other comment, your comment is irrelevant here so put it in the actual comment section
@@pineapplej7310 As a matter of fact i did aswell as here. It's funny cause ur the only one who replied so it obviously working.
I thaught that maybe a kind soul could help a brother out but apparently all i get is someone making an even less irrelevant reply to my question. The person who wrote this comment seemed like they knew a thing or two as they have a channel focused on sound.
Does it even matter what i do? is it even ur busssines? No + this person seemed like a girl, as i knew that some people be simping for good looking girls, i kinda knew that someone would click on her comment and look through her replys. That way i could get help :).
Oh my its' her xD
Thank you for featuring this interface. I was very intrigued when this model was released. It has just about everything needed. Cheers to an on and off switch, proper metering and MIDI!
Individual 48v & monitoring, as well as loopback #Hype Awesome option! I would have picked this up if it had been available when I was looking for my first interface!
After way too much deliberation I purchased an M4 and a rode NT1. I have started recording music in my room and I love it. Thanks for the reviews!
I got the same set, M4 And and Rode NT-1, perfect marriage.
Man gave us a whole rock concert at 7:56 , liked!
The independent 48v manual buttons was what attracted me to this one, love the overall sound and meter display. Fantastic
Yeah this is a fantastic interface.
@@Podcastageso only difference between m2 & m4 is mix dial? In any other point they are exactly the same? Or m2 has something better than m4.
after watching this video I just had to order this for my first interface, thanks man 🙌
did you buy the motu ...?
OH BABY!! My local music store was only place in Canada that I could see got it in today! Bought the only unit they had.....plugged it in and WOW what a thing of beauty. Using Maschine on Windows and loving the loopback feature !!
Would love if Bandrew would tell me why he doesn’t use this currently? I own it and love it but I’m just curious why u still use the Scarlett in current videos after giving this one such a glowing review? Did it not hold up well?
there is a podcast ep where he already answers this question.
but it basically boils down to consistency. in order for the review to be consistent with the audience watching it, he uses Focusrite as a base guide as to how will the microphone sound on an entry-level interface, so everyone will have an idea on how it will sound
The MOTU M2 video was great, the M2 blew me away, purchased it once the video was done playing.
wow, that was nice - thanks ! would love to see the Tascam 102i reviewed by you.
You should be getting a special christmas present from MOTU. This fantastic video made my decision for purchasing the M2 months ago and I can't be happier with it.
U are freakin' hilarious Buddy.... and still manage amazing reviews. Great job and greetings from 'Down Under'
Mine's in the mail and it's competitive to get one, they're getting snatched up pretty fast! Good job sharing the features... you make me excited about getting my system going! It was listening to members of Boulder Guitar Society on Zoom and a discussion of
the better sound one can get with a good interface (rather than the bloody computer!) that had me discovering the M-2. Stat-wise it looked like a winner and from our perspective it Sounds Good too!
so.. comparing 2i4, M4, and audient's iD14, which one is the best?
Edit: so my use case would be (1) recording a grand piano in a small studio; (2) recording a nicer grand piano in a large chapel hall; and (3) recording choir ensemble singing in the same large chapel hall. The microphones are a pair of rode M5.
Edit 2: the use cases I have seem to point me to the cheaper version with just 2 inputs (that is, 2i2 and M2) but I put the 4-in 4-out versions here so the comparison against iD14 is more of apple-to-apple comparison.
universal audio apollo (if you got the $$$). definitely unnecessary for podcast but excellent for music, but this one definitely can compare at this point especially for the price
@@acidbath3226 XD, apollo's price seems way above my league and probably my microphones. Maybe one day :D
@Thunderflick Production because?
Buy rubix 24
Beat
Thanks for the great reviews.. I got the M2 even if more expensive... installation and operation seamless (w10, i3 intel laptop) . Quality excellent despite the level of recording was surprisingly moderate - but I am using dyn mic (entry level) and compensated in the DAW. The meters were indeed very practical when deciding the gain
Again thanks!!
Love that it's made in the U.S.A.
Agreed. I should have mentioned this.
though... does this imply corner-cutting in the materials/components that they use? (I am assuming US labor prices are quite high and the M2 is selling at the price of a 2i2 which is made with much less manual labor costs.)
@@patchybeardopinions9340 I concur with that, but my point is that to compensate for the increased spending in manual labor, they have to use less expensive components, no? (Would like to be wrong about this of course XD)
made in the U.S.A means nothing special nowadays
@@lyrasimo When audio components that perform well are almost always made in China, it does
Thanks for suggesting this thing. My 2i4 is now collecting dust.
I really like the features of this interface, and it looks like it has really nice preamps. For my own use I'd get the M4 and plug a mixer into channels 3 and 4 and use channels 1 and 2 direct, giving me the flexibility to use microphones directly with the interface and plug all sorts of stuff into the mixer if I wanted to.
As a physical mixer or digital mixer?
@@woothepoo9397 A physical mixing board, something with nice preamps, that I can plug into the M4 and then have the option of going direct into the interface or going into the mixer then into the interface.
I'm doing that, I have a Motu M4 And a Soundcraft mixer connected to it, I need more inputs for my synths.
THIS is exactly why I'm contemplating picking up an M4. Currently using an Audient ID14 (original version). Cheers!
The audio loop back ALONE is one of the best features of this, period. I hate switching between my mobo to sample stuff with stereo mix from online. Thanks for the review. It helped me a lot.
I came back years later to say that this device has given me nothing but problems for the entire time I've had it, and Motu support is absolutely terrible. The driver gives me blue screens on Windows 11, sometimes the device just turns off, sometimes it makes a loud screech then stops, and Motu does nothing to help it.
No sticker?
Worst piece of crap ever.
Spend the extra $ and get the audient ID14. Game over
@@NickRobbMusic no midi i/o for the audient
Best audio interface ever!
@@NickRobbMusic Needs an updated model
@Redpill Progressive I record vocals and instruments, for me the A/D convertors and mic pre-amps in the ID14 are way more important than some perceived frequency
Man, great review! In fact you have become my new go-to for reviews. Your reviews are absolutely the most complete and thorough... the best!
It's a shame the build quality is a bit lacking. I really like the features over what the Focusrite offers.
the occurence of focusrite in reviews and recommendations on youtube is 10:1. annoying...
I don't see any correlation between that kind of motion and build-quality issues. You pay extra for shock-mounting. It's just not by itself worth doing more than asking if it's a bonus or not. You don't know until somebody tells you..
For what it's worth, the early feedback on Gearslutz from people who've already purchased was that this comment about the knobs was a head scratcher to them. They said it felt really solid. They could be shills, but I don't think so.
@@alexbreyer6921 That's good to hear. I don't think it's enough to deter me from getting one anyway. I'd really like to get the M4 version
Dodge a bullet and don't get a Focusrite.
4:26 That melody is so close to Bullet For My Valentine - Your Betrayal
Nice Sting-style bass playing.
Davie504 called the police on me for using a pick.
@@Podcastage Nah, Carol Kaye would be proud of you.
I bought this interface based on your review, I really like it. I gave my knobs and ports a wiggle and they seemed very solid as of November 2020.
First of all thanks for all the review you've done, I can't thank you enough for that, and especially for this MOTU M2 interface I've had since monday 16th. This one is a major upgrade compared to my Focusrite Scarlett solo 2nd gen, paired with the Mogami 2534 Quad XLR cable, the AT2020 and attached with the Blue Compass Boom Arm.
I really appreciate it and I wish you the best, merry christmas and a happy new year !
If you want to make an improvement get the Rode NT-1 too.
Got an SM7B recently and even though they are selling out constantly right now I managed to snag a MOTU M2 as well. The SM7B is such a great sounding mic and with the Motu m2 being a decently inexpensive interface with a high quality build and sound that gives just the right amount of clean gain for it makes for such a great combo.
Did you buy the motu M2? I have it and I want buy the SM7B, I am french so 'im want to be sure to understand well, when he is testing it on vidéo, he put knob at 3 o clock then 6 o clock and the motu seem to deliver enough power to drive the sm7b without having background noises etc. So it's all i need? i mean, it would be useless to have a cloudlifter?
@@Westodd Yes I did buy the Motu M2 and it definitely has enough gain for the SM7B. You won't need a Cloudlifter or FetHead.
I was gonna ask for this review. You already had a video up before I had time to ask the question, impressive!
A shootout for sub-200$ audio interfaces incl. latency values and preamp noise would be cool af, especially Focusrite vs MOTU vs Steinberg vs Behringer vs Presonus vs M-Audio vs Native Instruments 😁🤣
Kinda kidding although it would be super shootout lvl.
Great job man, keep it up!
Like that idea sub 200 shootout
@Basil Ganglia But buy the Quantum 2 especially if you have a Windows PC.
I ordered the MOTU M4 yesterday. Hope to get slightly better latency from it, otherwise I will return it.
Watched the video because I trust your gear reviews. My current interface is dying and I'm considering this one. Writing a comment because I loved the Dr. Who reference. Thanks for these great videos. Don't blink!
Plus the fact that MOTU stands for Mark of the Unicorn!! \m/
An update to my comment below.
I received an early Christmas gift.. the Motu M4.. and a Dbx 286... based on your videos (as well as another YTuber).. All I can say is.. HOLY Crapola, WOW!!!!
What a huge difference in sound from a single Scarlet Solor and to now with the 286 and the Motu. The 286 really let me quiet down some low end noise and the Motu for 2nd-ary amping if needed. Did I say wow? The 286 appears to be lowering my sound floor to incredibly quiet sounding (or lack there of sound). Podcastage, thanks for you reviews they have become invaluable and handy when trying to decide what to buy. Oh, and please don't chuck that red smoking jacket, it's stylish! haha
Dammit I just bought a Behringer a couple of months ago.
Thanks for the review.
Great review - thank you - was never quite happy with my Scarlett 2i2 3rd Gen (did a great job, but not quite happy). So after this review I bought the Motu M2.
Had initial problem with intermittent connection / noise using a high speed USB C cable - but switched to the cable supplied in the box and all is good
- I found the M2 noticeably cleaner with lower noise floor.
- For some reason has easier and more reliable selection of inputs in DAWs (Audition and Da Vince Resolve on M1 Mac).
- The on/off button so much more convenient.
- The level indicator so much quicker and more accurate to set esp when setting up for quick Zoom or Teams meet (I can get it spot on within a second or so before going live).
- And it has separate 48v Phantom Power for each channel so I can connect dynamic and condenser mics at same time
- Clean on a 48v Sennheiser condenser and more than enough power for Sure SM58 with less noise than the Scarlett.
- Sold the Scarlett and never looked back
I was considering the motu m2 as its specs are probably the best I have seen at its price point, but I am bit concerned that it might unstable with windows 10 (based on user comments I have seen in forums). How are people finding with Windows 10? Is it a good experience.
Windows 10 is unstable with windows 10
Excellent in-depth feature and spec review. Honest opinions and great real-time audio demos. Extremely helpful and much appreciated. Just ordered one based on this and numerous other reviews.
Quite perfect: there's no sticker in the package😂 lol yours are the most efficient reviews ever💪
Just picked up the M2 based on your Review. Use to use the Rode AI-1 based off your reviews. So far it is super clean input. The headphone amp is a little lower powered compared to the Rode. But the meters are pretty cool. Still learning all its tricks
OMG.
The way he threw the box made me fall of the chair laughing... LMAO.
Fuck that box lmao
Unboxing videos - arrrgghhh. There are actually tutorials on how to improve "your" unboxing channel. I'd say drive a kabar dead center into the box. How's that for ya chumps?
Hey, this guy is a really good gear reviewer! Just bought the M2 based on Josh at Sweetwater recommendation. This review just confirms, and thats nice.
Hey Bandrew, If I already own the Scarlet 2i2 2nd gen, is it worth it to upgrade to Motu M2?
Only if you are not gay
You absolutely launching the box made my crappy day into a good one lol. Cheers.
Also the video was very clear and informative. Thanks for helping to solidify my decision to get this interface! :)
Will wait to see how the drivers work out with software.
I just got my MOTU M4 .
IT'S JUST AWESOME!
The only complain i have with the M4 is the lack of SPDIF, apart from that is the perfect interface.
For $220 you can't expect that, I use an external Soundcraft mixer for extra inputs.
Nicest review i saw. I just get some sort of an unusual pleasure with the sound of clean voice without any noise.
hold mon button in 3 seconds allows you to monitor stereo.
Thanks for the tip, Race.
that blew my mind , just tried it
The “Fun, Interesting or Helpful” combo had me rolllinnnn & I had to instantly hit subscribe after that 😂🤣 Honestly a great review as well, very helpful. Thank you!
Awesome! Thank you! Hope you find some other videos useful. =)
So the Motu M4 has a mix dial. For $50 extra, that isn’t a bad bargain.
Romeo Mariano agree. It seems like the one to get
And 2 more inputs!
I just ordered an M4! I currently have an Arturia MiniFuse 2 and a UA Volt 2 here for testing, but I'm not completely satisfied with them. The MiniFuse has the monitor mix dial but can't drive my 600 Ohms DT 880 headphones loud enough when doing direct monitoring (less power on the output and additional output loss when blending with the computer audio). The Volt 2 sounds a tiny bit crisper, gets loud enough on the headphones out, but it misses the monitor mix dial and I couldn't get the provided plug-ins activated. Because the M2 also doesn't have the mix dial, I didn't consider a MOTU. Until I realized that the M4 has one and is just a bit more expensive. Now I found one second-hand in mint condition for under 200 bucks and couldn't resist.
motu means “ fat ”in Hindi lol 😂
Motu means Mark of the Unicorn
It is a PHAT unit!
@@swschilke True! (also Master Of The Universe, but that's not officially recognized). :)
It felt like he was constantly insulting this "m2" guy 😂
it means "die" (speaking to plural) in arabic🤔
I love it when audio products come bundled with software that is already free
you said Audient was the best AI for start. But now, you changed for this one?
It's precisely this review that got me to purchase the MOTU M4. Totally worth it. I'm Glad I made the purchase!
hi, is it wobbly too?
I may need to grab this. I hope it will run pretty well on Windows 10.
Incredible interface just ordered one, great demo thank you.
The last time I saw you get excited over an interface was Universal Audio’s Arrow, and the only con was the price tag! If you were to choose, which one would you keep and why?
Also, thank you for this review. I will be returning my Scarlett 2i2 3rd gen back to Guitar Center, and ordering myself a Motu M2! This was extremely helpful!
The audio RTL is a bit lower on M4 compared to my 2i2 2nd gen.. 6.8 vs 9 ms. This difference though small is perceptible. However I can get the virtual instrument latency on the 2i2 to be lower than the M4 due to the 2i2 allowing for more sample size options (3.25 vs 5.33 ms). This difference is virtually imperceptible, however it is nevertheless disappointing.
My M4 just came in.
Let's give it a spin!:D
I am waiting for mine to arrive next week. I hope to get slightly better latency on it compared to my Scarlett 2i2 2nd gen, otherwise I will have to return it, and save up for the Quantum 2.
@@thatchinaboi Let us know how it goes boys
How does m4 behaves?
@@h.hristov I'm keeping the M4 alongside my 2nd gen Scarlett 2i2. In terms of RTL for virtual instruments I can get a little bit lower figures on the 2i2, which is disappointing. However, the audio input latency is significantly lower on the M4 and therefore I am getting 2.2 ms less audio RTL with it. With my setup (an i7 laptop) I can get the audio RTL to be as low as 6.8 ms compared to 9 ms on the 2i2. In terms of virtual instrument latency, I can get the 2i2 to go as low as 3.25 ms (96kHz @ 104 sample size) while the m4 can go as low as 5.33 ms. In practical terms the difference between 3.25 ms and 5.33 ms is practically imperceptible. The audio round trip latency difference between 6.8 ms and 9 ms is more significant.
That is a very clean looking interface. The UI seems nice, but could use improvement on it for sure. I really like how they they organized the two XLR/TRS inputs
Just bought the M2 based on this glowing review amongst others. I can report that it is well made, works well with Windows 10 and has good latency, but compared to the 20 year old Digidesign M Box 1 it replaced, it is sonically inferior. The M2 has a very small sound stage and bring vocals very much to the front of the mix. I have over 30 years in audio electronics engineering and have worked for Roland, Yamaha, Alesis, korg etc as well as being involved in DAC electronics design. The moral of the story is, don't be fooled by the great noise, distortion and sampling frequency figures, as they don't necessarily translate to good audio quality - You need to demo what you buy and don't discount used classic gear with lesser spec (all you really need is 24 bit 48KHz for pro audio applications). I recomend older Crystal or Burr Brown DACs over newer ESS etc.
Your comment about the better quality of the Digidesign MBox 1 really caught my attention. Do you think all interfaces with the ESS DAC sound similar? Cuz I've heard that there is pretty much of a difference in sound between the M-line and the Ultralite line while they got the same ESS converter. Also heard people in general praising the ESS sound, some say the M2 and M4 sound much better than the Focusrite. I'm interested in the Ultralite units, however which similar audio interfaces would you personally recommend?
@@proudpolishherbsman2583 I don't know about other boxes using ESS technology, but certainly IMO the M2 and M4 sound inferior to the M boxes. Other recent interfaces I've tried like Presonous also sound inferior.
Couple of weeks later, but I noticed some very faint intermittent crackling in my Scarlett today and I thought of your video. Motu M2 on the way. Thanks for the great reviews as always.
Update in case anyone ever reads this in the great archives of the internet. I got this. Came home early from work just so I could sign for it from FedEx. Fired it up... and the direct monitor faulty. It sounds like I'm 500 miles away whispering in a cathedral, and tested it with multiple headphones. It's heading back. I'm sure I just had one in a million bad luck, but I didn't need all those bells and whistles anyway. Ordered an Audient iD4. Them's the breaks.
your box throw made me laughed so hard!