I just bought one of these because of the low price and all the positive reviews. If you really tighten all the screws and use lock tight, it is very stable and there is zero wobble. It is a remarkably strong bench and supports about 300 lbs of total weight on the three shelves. Assembly can be a bit awkward and frustrating unless you can recruit a second person.
I like the modifications you suggested, particularly regarding the peg board. Most reviews mention that the included light is pretty weak. Just purchased mine and plan to assemble it next weekend. You've given me some good ideas for upgrades.
Not unstable at all if you properly tighten the bolts and nuts. Maybe the earlier models were shaky but there are bolts and nuts around the perimeter of the peg board to tie it all together, but even before putting the board on it was pretty sturdy.
I don’t know where all these complaints about the work bench not being stable? I just put mines together and it’s nice and solid. Dragged it around my garage3 times figuring we’re I should place it. Maybe tighten all the screws snug when you’re all done putting it together? 🤷🏽♂️ other then that for the price you can’t beat it.
That's the only worry I had it being unstable, and just garbage. I'll probably just get 1 from home depot or something. I'll just be doing little stuff a golf clubs so.
Make sure the bolts are tight . mine free stands adequately enough for my needs . if you want to strengthen the peg board structure you could bolt two lengths of metal strut at 45 degrees on each end of bench .( from the horizontal "bench" top to the vertical "peg board structure")
could you tell me the inside dimensions of the bottom shelf.....my local HF doesn't have a display and need to know how much space i have to play with down there..want to see how big of a tool chest i can fit underneath
I drilled holes straight through the board and attached that way. . My vise has 3 existing holes in the mounting plate that you can attach with to a surface with nut and bolt.
That was the best review that I have seen in awhile...you didn't bash on the product with its flaws and you complimented the general design.
I appreciate that. It's not a bad work bench for the price.
You did a great job with organization with this work bench. Love your ideas like the slide out trash can power strip and etc. Good job.
Thank you
I just bought one and had zero stability issues. Its a really nice work bench especially for the price.
I just bought one of these because of the low price and all the positive reviews. If you really tighten all the screws and use lock tight, it is very stable and there is zero wobble.
It is a remarkably strong bench and supports about 300 lbs of total weight on the three shelves.
Assembly can be a bit awkward and frustrating unless you can recruit a second person.
The loctite is actually not a bad idea. Thanks for posting the tip.
Great job. Thanks for some ideas on upgrading the bench.
Your welcome. Glad I could help
I like the modifications you suggested, particularly regarding the peg board. Most reviews mention that the included light is pretty weak. Just purchased mine and plan to assemble it next weekend. You've given me some good ideas for upgrades.
I appreciate it. Glad I could be of some help. Yeah the light included doesn't put out a whole lot of light but it does help a little.
Anyway you could show us how you mounted the vise?
Not unstable at all if you properly tighten the bolts and nuts. Maybe the earlier models were shaky but there are bolts and nuts around the perimeter of the peg board to tie it all together, but even before putting the board on it was pretty sturdy.
Thank you for sharing your organization idea!
Your Welcome. Glad I could help.
Thank you. Any advice on mounting the vise?
I don’t know where all these complaints about the work bench not being stable? I just put mines together and it’s nice and solid. Dragged it around my garage3 times figuring we’re I should place it. Maybe tighten all the screws snug when you’re all done putting it together? 🤷🏽♂️ other then that for the price you can’t beat it.
Add a webcam to the front flap at the top, so you can have a live streaming bench :) nice bench btw
Thanks for the review. I appreciate it.
Your welcome.
Great video 👌
That's the only worry I had it being unstable, and just garbage. I'll probably just get 1 from home depot or something. I'll just be doing little stuff a golf clubs so.
Did you drill thru the metal to get vice on. I am interested to know how you installed it.
Yes I drilled through the metal. Used 1/4-20 x 1 1/2 carriage bolts to attach.
@@dingram3588 ty really helped me out
Two word LOCKING WASHERS!!!
Did you bolt the vice directly onto the tabletop part? Or did you add anything under it?
Nice video. I am ready to put mine together. I need it to be free standing. What modifications can I do during the build to improve sturdiness?
Make sure the bolts are tight . mine free stands adequately enough for my needs . if you want to strengthen the peg board structure you could bolt two lengths of metal strut at 45 degrees on each end of bench .( from the horizontal "bench" top to the vertical "peg board structure")
did you put a block of wood underneath the surface to attach a vice? Or did you attach the carriage bolts right to the metal?
No. The vise is attached with the carriage bolts to the wood top that came with the bench. No drilling thru metal at all.
What’s the name of the led lights please! Thanks bro
It's the Ullman Devices RT2 LT Rotating Work Light - Magnetic Site Light with 24 LED Bulbs, Swivel Head.
Bought it off Amazon.
@@dingram3588 thanks Bro
@@9one4ourphotography79 👍
What size head and length bolts did you use for vise?
1/4-20 x 1-1/2" Carriage Bolts
What size bolts did you use to mount the vise?
1/4-20 x 1-1/2" Carriage Bolts
could you tell me the inside dimensions of the bottom shelf.....my local HF doesn't have a display and need to know how much space i have to play with down there..want to see how big of a tool chest i can fit underneath
The bottom shelf is: 47 1/4 wide x 23 1/2 deep
@@dingram3588 thank a lot for getting back to me.
@@rayrivera2541 No problem. Glad I could help.
What trash can is that?
Where did you buy the trash can slide from?
www.amazon.com/gp/aw/d/B012A4NO6A/ref=cm_cr_arp_mb_bdcrb_top?ie=UTF8
@@dingram3588 thank you
How did you mount the vise?
I drilled holes straight through the board and attached that way. . My vise has 3 existing holes in the mounting plate that you can attach with to a surface with nut and bolt.
I'm surprised that top took a vise..
smith wesson
why? It will hold 220lbs! Its sturdy as hell