Is it possible to use this ESC on a rc car (crawler)? If they do forward/backwards, they could works, and by the way use outrunner motors. They got good torque and are light and cheap.
@@NunoFlyer does there exist any esc with similar specs (80A,6S) for ground vehicles??? I'm searching for days now on dozens of websites but I only can find esc's for helis and planes...
I have the same esc for my helicopter and all servos are work except for my motor. My motor is beeping really fast but it doesn’t work at all. It’s connected to my Ikon flybarless along with my esc and motor. What could be the issue?
@@NunoFlyer it seems that the transmitter and motor had to be calibrated. Now it’s working, however, there is either a long delay or sometimes the motor doesn’t turn at all when I throttle up. And when the motor turns on, my throttle is in the mid-stick position and it turns off also at mid-stick. Your help will be greatly appreciated. Thanks.
Calibrate your esc throttle. Remove all blades Full throttle stick up Connect the battery When you ear the hear the beep sounds, move throttle stick down, low position. You will hear another beeps, esc ready
A asa até vai deitar lume 🔥🔥🔥👍
excellent sharing, my best friend. happy weekend 👏👏🍺👌❤️🙏
That's a big esc 😆 👍
real pro amigo👍
👍👍
It’s a monster
nice 👌
I chose on Pilot 67 aircraft with dualsky 2000r. It does not work, it cuts me power, what parameter should I work on? Thank you
Like#9, good video and nice content
This esc have Trust reverse mode?
Something about reverse brake on manual but Im not sure about that, I never use reverse thrust, only 4D mode with t-motor esc
muito show este seu tbo ..gosto ver adoro boa tarde grande
Is it possible to use this ESC on a rc car (crawler)?
If they do forward/backwards, they could works, and by the way use outrunner motors. They got good torque and are light and cheap.
No my friend, only for airplanes/helis.
@@NunoFlyer does there exist any esc with similar specs (80A,6S) for ground vehicles??? I'm searching for days now on dozens of websites but I only can find esc's for helis and planes...
You can find for cars also, search for, hobbywing car esc
Regards
I have the same esc for my helicopter and all servos are work except for my motor. My motor is beeping really fast but it doesn’t work at all. It’s connected to my Ikon flybarless along with my esc and motor. What could be the issue?
Hello,
Maybe the wrong throttle position in your radio, endpoints in the right place?
Can you share a video just to ear that beeping?
Regards
@@NunoFlyer it seems that the transmitter and motor had to be calibrated. Now it’s working, however, there is either a long delay or sometimes the motor doesn’t turn at all when I throttle up. And when the motor turns on, my throttle is in the mid-stick position and it turns off also at mid-stick. Your help will be greatly appreciated. Thanks.
Calibrate your esc throttle.
Remove all blades
Full throttle stick up
Connect the battery
When you ear the hear the beep sounds, move throttle stick down, low position.
You will hear another beeps, esc ready