Those instantaneous part installation edits were amazing, camera girls camera skills with wrench guys wrench skills made this build a fast and fun video! Appreciate your guys enthusiasm! I will like all your videos for eternity!
I was going to comment the same. That reassemble edit was beautiful. the voice over levels are perfect and timing is perfect. You are both way better than you know. I hope you understand the quality of production you are doing.
If you ever put in bearings again, try freezing the bearing and heating up the case. A lot easier and you shouldn’t have to worry about putting it on at an angle or getting it fully seated
There is something magic about this channel. You guys are awesome, I wouldn't miss an upload for anything. So glad the bike ran! But coming from you, it's no surprise. You rock!
@@jenniesgarage Definately get yourself a sonic parts bath though... you will be SOOO mipressed with what it does with carbs and diesel jets... I did manage to destroy a Chonda carb with one (Chinese honda) as the metail was so bad it crumbled with the bowl nut... but that may just have been the high quality manufacturing...
Using miss matched cases is a huge gamble. I tried it with a chainsaw, it didn’t go well. The problem didn’t start right away, but after it was used for a short while, it had a bearing squeal that wouldn’t go away! Stay with matched cases if you have them, IMHO!
1. Float height. 2. Perform the accelerator pump adjustment (so that the spray just miss the slide plate) and install an O-ring on the AP cam screw. 3. Install a #40 leak jet. The bike had a Boyesen Quickshot IIRC so adjust that accordingly.
This guy and his lady are very happy.Doing things together.My wife of 38 years was same way.She passed so I miss her smiles and her laugh.Enjoy each other..
I'm doing this exact same thing on a 70cc junker I got for free. The series on this rebuild has taught me a few things, instilled confidence, and has inspired me to go roll my sleeves up and finish it! Thank you! Love your vids!
@@chrisc4427 It's a chinese knockoff 70cc that looks like it was used for parts, but the engine turned nicely. I've completely torn it apart, repainted the frame, got new electricals, currently have the motor completely apart now. Looks like the starter clutch gear has a broken tooth, so I've ordered a new one. I would normally not put time and effort into one of these chinese pit bikes, but it's a great learning opportunity for my kids to get into engines.
I think it's really a testament to the quality of videos you make that you were able to keep such a good viewer count after being on hiatus for half a year. Very rare for a channel to do that, but you guys managed it! I've loved all of your videos ever since I started watching. Have a great day and thanks for all the great content!
This has rapidly become my new favorite TH-cam channel and it's strange to me because I'm not even into bikes, cars, or the mechanical workings of them. I'm so glad the generator video randomly entered my recommended for you section.
Honestly wouldn't care if you did sponsor bits in videos, especially if it meant helping you fund new projects without breaking the bank! Another great video though, loved it.
While true they do deserve some sponsorship probably in form of proper tools like torque wrench, sadly majority of the companies that are buying screen time from youtubers are ether scumbags or questionable at best, like World of warships is just p2w scam and dollar shave club is getting you signed to subscription of products you might not need or want.
Hi @Jg, thanks for takeing the time/effort too post, appreciated. it's good screen time with no cussing (bad language etc..) Always fun to work on bikes... (mostly, lol) regards from U.K.
My yz450f does the same thing when you snap the throttle too quick. Falls on its face but then picks up. It’s like a little shot of nitrous when it kicks in though lol
Thanks for showing when you forget stuff or brake stuff. It happens to me and seeing it happen to others help me not get so mad about it when I mess up
Came across your channel quite by accident... I don't have a motorcycle any more these days, but I just love people using their hands on these jobs... excellent. liked and subbed!
Another great WR250 video. Engine reassembly, install, and test fire all in 1 video is super awesome. "A gasket and a miracle" is just gravy (LOL). Easily a top 5 ranked video for Jennies Garage! Keep up the good work.
Been a subscriber for a few years bro. I used to just love the mechanics and restoration of dirt bikes so I got my license and got a beat up 07 yz450f and I’m turning it into a supermoto, and it’s about done🤞🏽 I think your videos sparked my interest and it’s been nice working on my own bike finally!🔥
I love these vids because they show that you don't need to spend $9,000 on a new bike to have a ripping machine. buy something old, and spend some time refurbishing it. such a rad mantra
These 4 strokes actually have a common problem of bogging, 5/10 Yamaha's I've seen bog as soon as you snap it wide open. Good luck jake and can't wait to see you and jen riding together
This is usually while its on the stand and you wack the throttle open with no load. When You're riding/racing this bog isnt an issue unless your carb is gummed up. However you can do the zip tie mod on the accelerator pump actuator and boom it goes away all together.
The look on your face @ 9:58, HAHAHAHA. Too funny. I have watched a lot of your videos the past couple days as I've been home sick. Love em! The sense of humor from both of you are on point! Keep up the great work.
I have a 2004 yz450f. Very similar bikes. Mine was running like yours with s bog, and not ideling the greatest. Jake, get that carb and replace the orings in it's inner cavities. Take off float bowl, then the special screws out in the bottom of bowl, and see how the gaskets in there will be swelled up covering the air passage ways to the Venturi of the carb. There are Tiny tiny pin holes in there that need to be clear, and they can be commonly swelled up, and people only mess with the Jets and float needle, when truly there problem is deeper inside. You probably already know this info, but I thought I'd share. Now my bike runs like new! Also keep up the videos, I have loved them the past few years.
These video edits are getting better and better. Really love the attention to detail and time you're taking to edit the videos and take them to the next level
Yay it runs 🏁👌🏽good effort on the rebuild, it was fun watching. Mistakes are all part of the steep learning curve that is mechanical/ electrical machines. It’s all good so thanks for sharing 👍🏽😁
Just wanted to say those video edits at 10:45 and 13:09 did not go unnoticed and were highly appreciated! Also the edit at 10:45 makes it look like you could 10 of these projects each week - how hard could this stuff be?!
Loved the fake “Dollar Shave” ad. You guys are brilliant comedy. Love the sarcasm.
10 stars.
"This is a tool! We're not!" :D
Jennie's garage: new video
Me: hell yea
Rhine ok
Sameee
Pg
Those instantaneous part installation edits were amazing, camera girls camera skills with wrench guys wrench skills made this build a fast and fun video! Appreciate your guys enthusiasm! I will like all your videos for eternity!
Those adits are like false advertising and give me fake hope on being able to finish my bike projects at the same pace
Skill at both ends.
100% agree, was going to comment this myself!
I was going to comment the same. That reassemble edit was beautiful. the voice over levels are perfect and timing is perfect. You are both way better than you know. I hope you understand the quality of production you are doing.
How many of you love these videos
\/
+
You know it!hope there’s more jet ski motors to fix.
Mememe memememememememememememmemememememmemeemmemmememmememeememememe!!,,!,!!’!
I love this guys and I don't know why
I dont because my dirtbike wont start
If you ever put in bearings again, try freezing the bearing and heating up the case. A lot easier and you shouldn’t have to worry about putting it on at an angle or getting it fully seated
you can actually freeze the bearings with a can of compressed air computer cleaner like "dust off" right at the work bench!👍👍
I think I've seen him do that in the previous video
Nick Blaser I know I’m 10 months too late, but as he was struggling with the bearing, that’s what I was saying to my screen. “PUT IT IN THE FREEZER!”
articity I’ve done it that way dozens of times and never had an issue.
frosten wrong you can heat the case up if you keep it under 250 degrees. Also use an oven for even dispersed heat
I love your videos man, youre one of the youtubers who deserves more attention!
I concur!
Yeah, but if Jenny blew I feel like his videos would have a totally different vibe to them
I agree its hard to find authentic youtube creators..
“But I need 10 fingers more than I have.”
We’ve all been there.
+
yeah i only have 9 and a quarter middle finger my car engine got angry and ate it ,but we all must ride on!
There is something magic about this channel.
You guys are awesome, I wouldn't miss an upload for anything.
So glad the bike ran! But coming from you, it's no surprise. You rock!
Thank you! Glad you liked the video.
@@jenniesgarage Definately get yourself a sonic parts bath though... you will be SOOO mipressed with what it does with carbs and diesel jets...
I did manage to destroy a Chonda carb with one (Chinese honda) as the metail was so bad it crumbled with the bowl nut... but that may just have been the high quality manufacturing...
Your editing has gotten REALLY GOOD!
I scrolled for this.
I appreciate the comment is also edited
You guys need a p.o. box for fan mail.
and an amazon affiliate account so we can help get needed parts and fun stuffs
Very true!
The Dro and an Amazon wishlist for some very needed tools. That would be awesome.
@@gb8014 You should know by now that they are not poor. He works with what he has to keep it real and so we all can do what he is doing.
@@mmill6505 its a donation? lmao
The clutch transition blew my mind, I had to rewatch it a couple times.
Ordering gaskets?? OMG that's a change! :D
Love this channel, so much more real than other dirtbike channels on youtube
Camera girl rips!!!!
Good job!! :D
edit: thank you for the heart
I love the white and red trailer you have sitting outside your garage! I happy you finally got your motorcycle running mostly!👍
There are more than a couple videos about that trailer.
The Shasta trailer saga is epic. You must watch it Mae Hay.
You guys make hands down the best video’s on TH-cam. I love the chemistry and the relax nature of your videos, have a great weekend.
I start assuming all my project engines start on the 30th kick so I'm always surprised when it starts in half that. Great job as usual!
Using miss matched cases is a huge gamble. I tried it with a chainsaw, it didn’t go well. The problem didn’t start right away, but after it was used for a short while, it had a bearing squeal that wouldn’t go away! Stay with matched cases if you have them, IMHO!
1. Float height.
2. Perform the accelerator pump adjustment (so that the spray just miss the slide plate) and install an O-ring on the AP cam screw.
3. Install a #40 leak jet.
The bike had a Boyesen Quickshot IIRC so adjust that accordingly.
This guy and his lady are very happy.Doing things together.My wife of 38 years was same way.She passed so I miss her smiles and her laugh.Enjoy each other..
Brings me back to the 70s when I ysed to do teardowns on motorcycles. I worked at a Kawasaki/Bultaco shop. I did more then a few motos too
Yeah theres nothing better than tearing down bikes and getting them running agaain best feeling ever m8 a bet you loved those days👍
I'm doing this exact same thing on a 70cc junker I got for free. The series on this rebuild has taught me a few things, instilled confidence, and has inspired me to go roll my sleeves up and finish it!
Thank you! Love your vids!
Worpd_Gamer what r u working on
@@chrisc4427 It's a chinese knockoff 70cc that looks like it was used for parts, but the engine turned nicely. I've completely torn it apart, repainted the frame, got new electricals, currently have the motor completely apart now. Looks like the starter clutch gear has a broken tooth, so I've ordered a new one. I would normally not put time and effort into one of these chinese pit bikes, but it's a great learning opportunity for my kids to get into engines.
4:56 "The way this transmission works is: It makes you wanna throw things"
lmao
I think it's really a testament to the quality of videos you make that you were able to keep such a good viewer count after being on hiatus for half a year. Very rare for a channel to do that, but you guys managed it! I've loved all of your videos ever since I started watching. Have a great day and thanks for all the great content!
It's crazy how perfect these two are for each other...
You are the smartest man alive!!..I really enjoy watching you bring back sad and mistreated motorcycles back to life..big Weiner approved!!
I love the new video stile. With all the cuts and stuff, please keep it like that, I LOVE IT
I remember 50k subs, I'm so glad you guys are still going! One of my favorite channels on youtube. I love the chemistry you two have!
Quality video, getting better
This has rapidly become my new favorite TH-cam channel and it's strange to me because I'm not even into bikes, cars, or the mechanical workings of them. I'm so glad the generator video randomly entered my recommended for you section.
keep up your good work on your projects and your videos, love to watch them. so inspiring and the positive energy of your family is amazing.
Your videos are so good. Especially because when you’re taking apart and reconstructing you always save the viewer time and speed things thru
You have more charm than most 1million sub channels. Awesome stuff cant wait for more of your work.
CT90 is still the crown jewel of your channel so far. Dont get me wrong as these recent series are equally fun and informative. Great job!
Happy day when Jennie's Garage uploads a new video!
Gumball's Gameroom Agreed! 👍🏼
These videos bring me so much joy!
Honestly wouldn't care if you did sponsor bits in videos, especially if it meant helping you fund new projects without breaking the bank! Another great video though, loved it.
I actually got excited for a second thinking "hey they got a sponsor" but soon figured out it was a joke.
While true they do deserve some sponsorship probably in form of proper tools like torque wrench, sadly majority of the companies that are buying screen time from youtubers are ether scumbags or questionable at best, like World of warships is just p2w scam and dollar shave club is getting you signed to subscription of products you might not need or want.
Can't get enough of your dirt bike rebuilds.
I am not surprised it’s alive you do some nice work!!!
Love these videos. Viewer from Cyprus 🇨🇾.. continue the videos with this motorcycle
lol viewer from greece
@@user-fv4mv9ne3u Ελα η Ελληνική παρουσία 🇨🇾🇬🇷
*Jennies Garage Notification*
Me: “Carol, clear my schedule”
Hi @Jg, thanks for takeing the time/effort too post, appreciated. it's good screen time with no cussing (bad language etc..) Always fun to work on bikes... (mostly, lol) regards from U.K.
Great editing on this one, I’ll be anticipating next Friday/Saturday/Sunday.
I love how you make everything so fast easy and simple all in one video
Great video as usual! I especially like the comedic action between you and camera girl. I would pay for it at a comedy club!
Are you counting this a a Shasta video since it appears at the end?
I have a fever and the only cure is more Shasta videos!!!
That's how I found this channel.
I love this channel by far the best entertainment!!
Thank you!
@@jenniesgarage absolutely! Thank you for all that you do for us subscribers
You Rock, a little carb work and your off.Nothing more satisfying than having it start. Great job camera Girl.
Jennies Garage...Love your videos, you are so funny. Please keep them coming. I will say my OCD did kick in when I saw the dirt on the cases..LOL !!!
Im learning a lot about fixing motorcycles while watching your videos.
Thanks
Camera girl has improved a lot keep it up
i wanted to see it run btw your the only person i turn my ad block off for
Hey that joke about sponsorships if you do get one go for it you deserve money for what you do
I love watching our videos could watch them all night can't wait for next one
My yz450f does the same thing when you snap the throttle too quick. Falls on its face but then picks up. It’s like a little shot of nitrous when it kicks in though lol
Absolutely love this channel
The joking between husband and wife makes it wonderful to watch
good video but you should do these types of videos more often
Gordon Freeman you know how much work this video took and time ?
I know mate but even with a lot of work a month is still a long time for a video
Thanks for showing when you forget stuff or brake stuff. It happens to me and seeing it happen to others help me not get so mad about it when I mess up
when are we gonna see camera gurl try her first wheelie?
You guys are made for a TV show. Although we would all miss you. Great job again.
"And it will not leave a crater in the earth." I, sir, love your standards of success.
THE most wholesome content I've ever seen in my several years of browsing the internet ❤
Best channel on TH-cam I love u guys. Camera girl kills it! Keep up the awesome work and the humor is hilarious
Love the energy of your videos plus this is REALLY informative. Nice work.
Came across your channel quite by accident... I don't have a motorcycle any more these days, but I just love people using their hands on these jobs... excellent. liked and subbed!
This guys got the shadiest set of tools I’ve ever seen and I love every bit of it
Another great WR250 video. Engine reassembly, install, and test fire all in 1 video is super awesome. "A gasket and a miracle" is just gravy (LOL). Easily a top 5 ranked video for Jennies Garage! Keep up the good work.
You guys made my day. Love y’all.
God that sound!!! I freakin miss my yz426f. Damn your videos make me smile! Hey man you are an inspiration!
You are the most down to earth, humble man on earth bro, respect.
Been a subscriber for a few years bro. I used to just love the mechanics and restoration of dirt bikes so I got my license and got a beat up 07 yz450f and I’m turning it into a supermoto, and it’s about done🤞🏽 I think your videos sparked my interest and it’s been nice working on my own bike finally!🔥
You guys are hilarious, could genuinely see myself chilling in the garage having a few beers. Cheers to your great videos!
I love how confident you are with cracking engine cases, I have an ATC70 and i am dreading cracking it open.
Pull your skirt up and get to it 😆
@@mikelwmc Challenge accepted!
Loving the creative edits you are throwing into these new videos! Keep it up!
Easily one of my favorite TH-cam channels thanks for the content
I love these vids because they show that you don't need to spend $9,000 on a new bike to have a ripping machine. buy something old, and spend some time refurbishing it. such a rad mantra
These 4 strokes actually have a common problem of bogging, 5/10 Yamaha's I've seen bog as soon as you snap it wide open. Good luck jake and can't wait to see you and jen riding together
This is usually while its on the stand and you wack the throttle open with no load. When You're riding/racing this bog isnt an issue unless your carb is gummed up. However you can do the zip tie mod on the accelerator pump actuator and boom it goes away all together.
Your videos just get better and better! Thanks for posting!!
The look on your face @ 9:58, HAHAHAHA. Too funny. I have watched a lot of your videos the past couple days as I've been home sick. Love em! The sense of humor from both of you are on point! Keep up the great work.
Wow!! You two are so much fun to watch. Y'all make it look so easy.
My 2005 yz250f used to bog when you twisted the throttle I did the accelerator pump mod and it's perfect now no bogging down
I have a 2004 yz450f. Very similar bikes. Mine was running like yours with s bog, and not ideling the greatest. Jake, get that carb and replace the orings in it's inner cavities. Take off float bowl, then the special screws out in the bottom of bowl, and see how the gaskets in there will be swelled up covering the air passage ways to the Venturi of the carb. There are Tiny tiny pin holes in there that need to be clear, and they can be commonly swelled up, and people only mess with the Jets and float needle, when truly there problem is deeper inside. You probably already know this info, but I thought I'd share. Now my bike runs like new! Also keep up the videos, I have loved them the past few years.
These video edits are getting better and better. Really love the attention to detail and time you're taking to edit the videos and take them to the next level
Awesome! Can't wait to see it rip!!! Nice work.
Yay it runs 🏁👌🏽good effort on the rebuild, it was fun watching. Mistakes are all part of the steep learning curve that is mechanical/ electrical machines. It’s all good so thanks for sharing 👍🏽😁
Just wanted to say those video edits at 10:45 and 13:09 did not go unnoticed and were highly appreciated! Also the edit at 10:45 makes it look like you could 10 of these projects each week - how hard could this stuff be?!
Your videos are always so much fun! Love the bit about sponsorship.
So glad to see you back at it with the WR!
how can a so simple video be so captivating? i thinks its cus they are so sympathetic!
The editing skills are def going a notch up. Love it!
You make ripping a motor apart and putting back together look like child's Play!
“I don’t know what I’m going to do if the motorcycle runs”
Son: “ride it!”
😂😂😂😂
You two are so watchable... I love watching him work and talk he reminds me of AvE
Love all the little edits / transitions in this vid! Keep up the great work!! :)
This has to be one of the best channels on TH-cam
Amazing work! I love watching you guys. So wholesome and knowledgeable.
That screwdriver toss at 14:28 was epic! The damn I’m good flip!
Well done! I'm hooked on Jennies Garage. Learning more about motors than any other channel. :)
Y’all are awesome, one of a kind. Knowledgeable with a sense of humor to keep it entertaining and informative!
Mike and the mechanics! All I need is a miracle