Personally i know there is alot of holster companies in the market, but i think Tier1 concealment is the best. Just my opinion, i got like 4 holsters from them, they are pricey but worth every penny to be comfortable with a firearm.
@@shadow1958-p8m 100% it's the adjustability for me. I can't bring myself to buy a holster without clip AND claw adjustment. They usually leave a little too much material on their holsters but it's easy to trim down.
Awesome review, question though. I have ran the DCC clips in the past and switched them back to the plastics. I run my tier1 slim/elite for at least 12 hours daily. The DCC clips seems to wear out my next belts/kore belts super fast and they start to fray right were they set on the nylon belt. Have you had this issue? Tier 1 holsters are awesome and the only holsters I try to use now. I do always switch there hardware out to stainless cause mine like to rust from the Pa heat.
@@HighCappa45 I have the EDC S belt from Tier 1 and it's holding up pretty well so far. My shit does rust pretty quick though, it's hot in the south. Lol Where do you get the stainless hardware?
Is your other holster light bearing or not? and if it is, how much of a difference is it between that and this holster in terms of bulk? Curious as to how much light bearing vs non light bearing matters to you personally when concealing aiwb.
@@BigShotBrandi The APX is not light bearing but I have two axis slim holsters for my p01, one non light bearing and one for a TLR7A. The difference with a smaller light isn't too dramatic but it absolutely adds some bulge because the clip has to sit on top of the light.
C&G Holsters actually makes great holsters for the p10 series, at a much reduced cost, then I bought a UM Tactical sidecar kit, and that has really changed the way I carry. but when I get some cheddar not meant for my little girl, Im getting me a T1C fasho
@@JFR19 ok man cool , show a review if you can on the future to see how you did it , mine I’ve been messing around with it but still have I bulge and is kind annoying is my first holster with a sidecar , maybe is not that bad as I think but I keep thinking that I’m printing and is driving me crazy lol
@@espadafull Just posted up a short of the way I set it up with the DCC clips. A side car to me took a little getting used to but now I love it. Printing for me is a matter of how much, 😂 I gotta trim down some if I really want to print less.
@@NubsDaShooter tbh bro, if you like the Axis elite, I don't think it's worth the extra money. I just posted a short showing how I set it up and a side by side with my Axis Slim.
@@NubsDaShooter it's kind of subjective though, the APX offers so many configurations, there may be one that's a game changer for you. I just like a traditional AIWB setup so that's the direction I went.
I did FTF , but I fixed it by polishing the feed ramp, other than that, it's been running like a champ. I got the optics version with holosun and I just recently ported mine. It's pretty flat shooting. Also mine is fairly new , I've only put 150 rounds so far.
Personally i know there is alot of holster companies in the market, but i think Tier1 concealment is the best. Just my opinion, i got like 4 holsters from them, they are pricey but worth every penny to be comfortable with a firearm.
@@shadow1958-p8m 100% it's the adjustability for me. I can't bring myself to buy a holster without clip AND claw adjustment. They usually leave a little too much material on their holsters but it's easy to trim down.
Awesome review, question though. I have ran the DCC clips in the past and switched them back to the plastics. I run my tier1 slim/elite for at least 12 hours daily. The DCC clips seems to wear out my next belts/kore belts super fast and they start to fray right were they set on the nylon belt. Have you had this issue? Tier 1 holsters are awesome and the only holsters I try to use now. I do always switch there hardware out to stainless cause mine like to rust from the Pa heat.
@@HighCappa45 I have the EDC S belt from Tier 1 and it's holding up pretty well so far. My shit does rust pretty quick though, it's hot in the south. Lol Where do you get the stainless hardware?
Is your other holster light bearing or not? and if it is, how much of a difference is it between that and this holster in terms of bulk? Curious as to how much light bearing vs non light bearing matters to you personally when concealing aiwb.
@@BigShotBrandi The APX is not light bearing but I have two axis slim holsters for my p01, one non light bearing and one for a TLR7A. The difference with a smaller light isn't too dramatic but it absolutely adds some bulge because the clip has to sit on top of the light.
C&G Holsters actually makes great holsters for the p10 series, at a much reduced cost, then I bought a UM Tactical sidecar kit, and that has really changed the way I carry. but when I get some cheddar not meant for my little girl, Im getting me a T1C fasho
Hey man I did order the discreet clip and they work just fine, I wish that I could send a picture of my set up
@@espadafull Yes! I ended up mounting them and they're great, I meant to add a clip at the end showing how I set it up but forgot.
@@JFR19 ok man cool , show a review if you can on the future to see how you did it , mine I’ve been messing around with it but still have I bulge and is kind annoying is my first holster with a sidecar , maybe is not that bad as I think but I keep thinking that I’m printing and is driving me crazy lol
@@espadafull Just posted up a short of the way I set it up with the DCC clips. A side car to me took a little getting used to but now I love it. Printing for me is a matter of how much, 😂 I gotta trim down some if I really want to print less.
@@JFR19 ok cool I’m going to check that short , 👍👍
These days nobody is looking at you for printing. People too busy looking at their phones. Just go about your day.
Wonder if it’s that much of an upgrade from the axis elite
@@NubsDaShooter tbh bro, if you like the Axis elite, I don't think it's worth the extra money. I just posted a short showing how I set it up and a side by side with my Axis Slim.
@@NubsDaShooter it's kind of subjective though, the APX offers so many configurations, there may be one that's a game changer for you. I just like a traditional AIWB setup so that's the direction I went.
I love my p10c such a great carry gun. Have you ever had issues with yours?
@@hunter1028It is! And not yet but I don't have a ton of rounds through the gun.
I did FTF , but I fixed it by polishing the feed ramp, other than that, it's been running like a champ. I got the optics version with holosun and I just recently ported mine. It's pretty flat shooting. Also mine is fairly new , I've only put 150 rounds so far.