Good presentation of TOTAL disassembly. All too often guys show the cleaning cycle but either skip or gloss over the sanitation portion of letting the correctly mixed sanitizer DRY. Good job!
Whats the low side pressure should b on the manifold gauge mines at 95psi and not making ice compressor runing fan working water pouring what could b isssue
Low side should start around 55 and pull down from there. You could have a harvest valve leaking by. Could be a TXV problem. You could be stuck in harvest.
Hi I need help same this ice machine I look today and I don’t why is not working water pump and behind the evaporator micro switch motor aswell only working compressor
Gotta keep those machines clean! Your customers are lucky to have such a knowledgeable tech! Well done Ice Guy!
I heart you !
I already recommend u on my collegues today to watch ur video
That’s awesome bro. Thank you for that.
Good presentation of TOTAL disassembly.
All too often guys show the cleaning cycle but either skip or gloss over the sanitation portion of letting the correctly mixed sanitizer DRY.
Good job!
You make a valid point! The sanitation part of the cleaning process is very important. I’ll have to include that in my next video.
Good job
Thanks Ronnie!
Thsnks for knowledge
This is how we learn.
Whats the low side pressure should b on the manifold gauge mines at 95psi and not making ice compressor runing fan working water pouring what could b isssue
Low side should start around 55 and pull down from there. You could have a harvest valve leaking by. Could be a TXV problem. You could be stuck in harvest.
Hi I need help same this ice machine I look today and I don’t why is not working water pump and behind the evaporator micro switch motor aswell only working compressor
How I can contact to you living in Uk and I need help this ice machine
I’m not technically tech support. Try calling IceOMatic tech support. Trying to diagnose machines through text and comments is close to impossible.
What is the most common issue water pump not starting?
Replace water pump brand new
Maybe it’s not getting power from the control board? Or maybe the water probes are not working properly and the machine thinks it’s full of water.
❄️🇺🇸💪👍
💪
thats no good!
👍