At the steepest hills, when the motor struggles and stalls, the battery can be putting out 10+amps to try to spin the motor. I once tried climbing a 45-55 degree road and it gave up in the middle. The battery bar went down from 4 full bars to just one. Petrol is more efficient on hill terrain.
could you do a video showing how the cruise setting is achieved. I've seen it on the m5 display but no idea how to get to use it, or know much about how it works.
If you hold the throttle down for 10 seconds, it will automatically go into "Cruise Mode", and it will hold that speed for you until you hit the throttle, brakes or pedals .. Hope that helps
That's totally different from mine as I need to press the controller down button on the controller for several seconds for it to go into either the 'Cruise' mode when using the throttle or the 'Push/Walk' mode when stationary....!
Press the down button on the controller for 2 or 3 seconds for it to go into either the 'Cruise' mode when moving and using the throttle or the 'Push/Walk' mode when stationary, I'll upload a video later....!
My controller (X008-AAM003) and the M5 display only has settings 1 to 20. Would you possibly know what the correct settings are for this configuration?
What happens when u get a different controller set up as I got which is total different to yours and my bike is 5hrs old as I just got it delivered 🤔 cos your set set up is old ?
My bike is a _26"_ but the overall dimension of the tire is actually 29". On my first ride it should have logged 12km but logged 18km. So I adjusted it to 29... we'll see what happens. 😁
Hi - out on a bike run along side another bike - my bike will only cruise at 15kph or 25kph in no 2 - how do I change settings so I can bike along side someone at 20kph please ? Thanks
@@RonWalkerCairngormGuides Thank you. I suppose it woudl be as secure as a regular bike with a bike chain. It would be my all rounder, out-n-about and shopping when I retire at end of year. Take care and enjoy.
Hi Ron, i've sorry for my english and my question... i've buy the mx03 and is the fist ebike that i use. I not know, but is normal that on the LCD i see only 7 Ah of consuption at the max of the speed. Can you confirm? are only 336W delivered to the motor? Thanks Antonio
Check the www.shengmilo-bikes.com/collections/replacement-parts/products/shengmilo-e-bike-display-mx04-mx05-2023-new-mx03 website or contact the manufacturer!
search for Nokee-U Display Manual from King Meter, same as mine. Totally different setings, but Display looks nearly same...M5 manual is different, i have an MX05
In die Stufe 8 gehen anstatt der 100 eine 25 eintragen und schon is das ding auf 25 gedrosselt ..... in dem punkt 1 ist die Helligkeit des Display 1 2 oder 3 gruß aus Hessen ^^
Hello I have a question, if you stop pedaling, the bike starts to slow down? For me, this happens at every level of support, is it normal ... I can't imagine driving without batteries ... Regards.
It’s just like a normal bike, if you stop pedalling there’s no pedal assistance and you’ll slow down unless you are going downhill or using the throttle!
@@RonWalkerCairngormGuides if done some research and changed a few settings and now it works all the time even if rode as a normal bike no throttle or pedal assist, thanks for getting back to me
Thank you for this video really helped alot.
Just took a screenshot of the description. Many thanks!
At the steepest hills, when the motor struggles and stalls, the battery can be putting out 10+amps to try to spin the motor. I once tried climbing a 45-55 degree road and it gave up in the middle. The battery bar went down from 4 full bars to just one. Petrol is more efficient on hill terrain.
I was wondering how the controller work thanks m8
Nice to chat on the phone today 🙂
Great bike for the price. Comes mostly assembled.
Absolutely
What is set in menu P00 please?? This item is not mentioned in the manual.
could you do a video showing how the cruise setting is achieved. I've seen it on the m5 display but no idea how to get to use it, or know much about how it works.
If you hold the throttle down for 10 seconds, it will automatically go into "Cruise Mode", and it will hold that speed for you until you hit the throttle, brakes or pedals .. Hope that helps
That's totally different from mine as I need to press the controller down button on the controller for several seconds for it to go into either the 'Cruise' mode when using the throttle or the 'Push/Walk' mode when stationary....!
Press the down button on the controller for 2 or 3 seconds for it to go into either the 'Cruise' mode when moving and using the throttle or the 'Push/Walk' mode when stationary, I'll upload a video later....!
What about making go faster when trail riding on private land
P08: 43 OR OFF-ROAD 100* (Speed limit in kilometres: 1-100: 100*= no speed limit)
@@RonWalkerCairngormGuides hi i dont have 100 on p08.
My controller (X008-AAM003) and the M5 display only has settings 1 to 20.
Would you possibly know what the correct settings are for this configuration?
Can you ride the bike like a normal one if the power is off?
Можно сделать так , чтобы газ работал когда выключен ассистент? Когда ассистент в положении 0 у меня не работает газ
Glad to be of help, thanks for the feedback. Cheers Ron
What happens when u get a different controller set up as I got which is total different to yours and my bike is 5hrs old as I just got it delivered 🤔 cos your set set up is old ?
My bike is a _26"_ but the overall dimension of the tire is actually 29". On my first ride it should have logged 12km but logged 18km.
So I adjusted it to 29... we'll see what happens. 😁
This worked! Odometer is accurate!
P02: 001* (000 for Kilometres and 001* for Miles)
How do you change kph to mph on the m5 display please?
P02: 001* (000 for Kilometres and 001* for Miles)
@RonWalkerCairngormGuides it comes up with C and 0000 when i hold both arrow buttons ? Cannot choose anything else ?
how do i set it t o mph ?
I’m tryna figure that out as well
@@716sinner MENU 2 set to one m8
In the settings do you know what all 20 P are I know p1 is for the light on the computer and p2 is for setting the mph and that's it
Read the video’s description as it has a brief description of most of the individual settings!
What should p07 be on on my shengmilo mx03 26 inch fat bike
@@daz7171 001 on the original MX03, see the video description as it has all settings listed!
Can i repair my padego e bike with an M5 display
Hi - out on a bike run along side another bike - my bike will only cruise at 15kph or 25kph in no 2 - how do I change settings so I can bike along side someone at 20kph please ?
Thanks
Read the description for controller settings
Interested in crusie mode, please. Also, is the comntroller removebale, say if 'gone to shops', please?
No controller isn't removable as for the cruse control I'm not sure it works on that model but will check it out once we return home in September!
@@RonWalkerCairngormGuides Thank you. I suppose it woudl be as secure as a regular bike with a bike chain. It would be my all rounder, out-n-about and shopping when I retire at end of year. Take care and enjoy.
Are you still ebiking?
Hi Ron, i've sorry for my english and my question... i've buy the mx03 and is the fist ebike that i use. I not know, but is normal that on the LCD i see only 7 Ah of consuption at the max of the speed. Can you confirm? are only 336W delivered to the motor? Thanks Antonio
At full assistance, it shows 7-8 amps max on my display too, so perfectly normal!
@@RonWalkerCairngormGuides thanks Ron
Do you know where to get a replacement display? Mine got stolen the other day and can't find it anywhere online
Check the www.shengmilo-bikes.com/collections/replacement-parts/products/shengmilo-e-bike-display-mx04-mx05-2023-new-mx03 website or contact the manufacturer!
Mi bike don't have all of that menu diablo rks fatbike i need help
search for Nokee-U Display Manual from King Meter, same as mine. Totally different setings, but Display looks nearly same...M5 manual is different, i have an MX05
Does cruise control work
I couldn't get it to work , don't really need it tbh
Set p017 to 01 and long press down botton for auto cruise control
What button needs long press down for Cruis control?
@@marvinwycoco4048 p017 is the Odometer for me.
Hi
Can you please explain how to change the LCD screen from Km to MPH? thanks
All the settings are in the description, It's P02!
In die Stufe 8 gehen anstatt der 100 eine 25 eintragen und schon is das ding auf 25 gedrosselt ..... in dem punkt 1 ist die Helligkeit des Display 1 2 oder 3 gruß aus Hessen ^^
..funzt bei mir leider nicht. habs sogar runter auf die niedrigste --> 17km/h.. bike rennt immer noch 30km/h.. ne idee? danke^^
Absolutely as much use as as a chocolate frying pan.
All the individual settings are in the video’s description!
Hello
I have a question, if you stop pedaling, the bike starts to slow down?
For me, this happens at every level of support, is it normal ...
I can't imagine driving without batteries ...
Regards.
It’s just like a normal bike, if you stop pedalling there’s no pedal assistance and you’ll slow down unless you are going downhill or using the throttle!
@@RonWalkerCairngormGuides but in the options you can change it somehow ...
My speedo doesn’t work on 0 , have you every had that mate , thanks
Hi Paul, I've not heard of that happening, did you accidentally change any settings before the issue?
Neither does mine. I am pretty sure it isn't meant to. When its not accelerating the entire system is in standby.
@@RonWalkerCairngormGuides if done some research and changed a few settings and now it works all the time even if rode as a normal bike no throttle or pedal assist, thanks for getting back to me
@@SirDragonClaw try having a look at this mate hope it helps th-cam.com/video/v4dUrczJbE0/w-d-xo.html
@@paullynch1938 that's great what setting did you change?
Hi Ron eexplain each number to what it reppresents and put new videos of the ebike. I also bought the same ebike.
1 Display 1 to 3 Brightness
2 1=MPH 0=KM
3 Ball Volt 48
4 Time Out 0=No Sleep
5 0=3 Mode, 1=5 Mode
6 Wheel Diam = 20
7 Spd Meas Mgntic StL= 01 -geared mtrs 500-750w
8 Spd Limit 0-100 (100=100%)
9 0=Zero Start 1=non Zero start (Delay)
10 Power Assist 2=PAS and Pure Drive, 1=Throt only
11 PAS sens 1-24 (do 23)
12 Start Strenth 1-5 (1)
13 Passive Mag steel set 5-8-12
14 12a = 12
15 ?
16 Odom reset 5 sec = total reset
17 Cruise Control 0=NO 1=Cruise
18 18 Spd Proport Adj 50-150
19 0 level adjust 0includes 0
20 0
It's all in the description!
@@geolatorre Can I change 14 12a to 18a the controller is 18a
@@geolatorre PAS sens is 23 more sensitive than 1
Aye ron,, mines has arrived, it only goes up to P.a.s 3 . not 4/5 tried it on the road today, Is there some setting up required ,?
You need to set PO5 to 01 for 5 PAS, see video description and th-cam.com/video/PwxCHXJ4N-U/w-d-xo.html
Can we reset to manufactury setting?
The original settings are in the description and you need to manually adjust each one!
Yes!