Very smart design with freewheels. The motor can power the rear wheel without rotating the pedals and you can pedal without the motor spinning. Brilliant!
Это не так. Он в итоге приварил звезду, которая на двигателе жёстко и свободного хода там нет. Но в видео этого не показал. Теперь если вращать педали, то двигатель будет оказывать сопротивление.
This video is everything I love about Engineering, teaching, and time outdoors all wrapped into one. Seriously good shit! Way to work with what you have on hand. I think you've inspired me to pop my rarely used hoverboard open. Cheers, mate!
From this to engineering is a long way. However the idea is sound. The execution of the project must be revised. Too many parts are assembled by the eye. The use of a tandem bicycle crank and a well centered sprocket on the motor casing would solve the issues. Also a battery upgrade would help.
You made it look easy and you never made a comment about lining up the two chain sprockets which is a must and yours just happened to be perfectly aligned amazing and I love the fact that you did not use four 12 volt batteries
Great job with a minimum on tools and it works. Super that you use old parts to make something new. I hope that we can see more selfmade jobs from your hands.
I built an ebike too but this is sooooooo much better. Well done my friend. I was confused at first by what you were doing by the end it all made sense.
Nice welding. I just started welding whit stick in my garage to get my bike ready. Took 1 pack of sticks and then I got it. Now bike is ready for winter :)
Cool build, I've never seen somebody make a freewheel crank before. I think it's easier connecting the motor with chain to a new chain sprocket on the back wheel hub(which already has a freewheel). Cheers!
yes but some of those wheel-mounted sprockets mount via rubber clamps on the spokes - also keeping the motor in the driveline constantly. From what I can see, looks like his means you're not fighting the motor when pedaling and removes unbalanced stress from the spokes. It's actually a pretty smart method. Setups like that for those 2 stroke petrol (gas) motors are pretty expensive and this is the first time I've seen someone create one for an electric motor. If my bike crank was a 3-piece instead of 1 piece, I'd be trying my hand at this - for now I'll save it in case I get a chance to in the future. Hell, if I hadn't just given my unfinished tadpole recumbent trike away I could have built one for that
MABUHAY!!! SUPERRRRRR GALING TALAGA MGA FILIPINO!!!! THANKS FOR SHARING...MAHAL NG MGA E-BIKES D2 SA GERMANY...GUSTO KO RING GAWIN YAN KASO WALA AKONG GAMIT...
И одни восхищения. А ни кто не усмотрел, что фривил на двигателе не может так работать. Там возможно установить только намертво звезду. И если разрядится батарея, то придется маслать педали и вращать мотор .
Very wise , infact i was trying to make a free wheel sprocket but in vain. After watching this video it's look so simple and will just do the same thing. Thank this video is of great importance and very helpful.
He did well... Only concern if too much torque is applied to such a crank and it internally snaps or falters at speed or under heavy torsion... A locknut mechanism could be attached somehow?
Im doing this with my bike :-) half way through just need to order a few parts to carry on I need new bottom bracket as mine isnt long enough to accept the freewheeling crankset but ill get there......excellent video mate no doubt this will help a lot of people
Hope your president supports local talents such as you. Sana suportahan ng gobyerno mga young inventors/innovators na katulad mo. More projects please.
You are a genious mecanic! No centering tools, just your two hands and your brain, and slippers :-) impressive! @ All: did you see how the batterie was made: a bunch of Li-eon rechargables, put serial and parallel. Just like in a Tesla... no joke.
Tell me if this motor despitewhat in the front wheel of the bike will not it hard to pedal if you drive only using the pedals,not the wheel to give resistance?
Very smart design with freewheels. The motor can power the rear wheel without rotating the pedals and you can pedal without the motor spinning. Brilliant!
Это не так. Он в итоге приварил звезду, которая на двигателе жёстко и свободного хода там нет. Но в видео этого не показал. Теперь если вращать педали, то двигатель будет оказывать сопротивление.
making a freewheel crank so you arent forced to pedal is actually so damn genius
This video is everything I love about Engineering, teaching, and time outdoors all wrapped into one.
Seriously good shit! Way to work with what you have on hand. I think you've inspired me to pop my rarely used hoverboard open. Cheers, mate!
From this to engineering is a long way. However the idea is sound. The execution of the project must be revised. Too many parts are assembled by the eye. The use of a tandem bicycle crank and a well centered sprocket on the motor casing would solve the issues. Also a battery upgrade would help.
An example of real creativity, good job!
You did one heck of a good job 👏
Excellent engineering skills & mechanical application.
You are recycling which is good and you are saving the environment.
Thank you for sharing this video.
just can't afford midrive system. but thanks bro.
Tumpa Talapatra movimiento movimiento
Yes very good
@@albertnario4877 sir if i use 250 watt moter , how much speed i get ?? Please reply sir
depends on road, and gearing. my experience can you reach 35kph up on flat road
perfect, exactly what i was looking for! i was wondering how to best make the pedals stop spinning and your solution is both cheap and elegant!
You made it look easy and you never made a comment about lining up the two chain sprockets which is a must and yours just happened to be perfectly aligned amazing and I love the fact that you did not use four 12 volt batteries
Good job matey. I like that tune aswel 👍🏽 catchy
The freewheel crank is just what I needed! That's so clever!
Good work buddy , really appreciable job.
That freewheel crank idea ws fantastic!!,
Keep making 😉
You are an amazing engineer my good friend. Have a great day.
Amazing ingenuity with so little equipment you have made something amazing. A great testament to your skills and inventiveness
very nice way of keeping the drive line simple and still allowing the pedals to idle when just using the motor. Nice work
Great job with a minimum on tools and it works. Super that you use old parts to make something new. I hope that we can see more selfmade jobs from your hands.
dude, that was awesome! very creative and resourceful
Wow, you made that look easy, impressive work
You have a great understanding of things. Keep it up! 👍
This might just be my next project with my everlast welder. Great idea!
Привет
This is a great project, thanks for posting the video.
One of the Best projects presented,Congratulations.
I built an ebike too but this is sooooooo much better. Well done my friend. I was confused at first by what you were doing by the end it all made sense.
Very Nice project those little hubmotors are looking powerfull, Nice video , sorry doe my bad english
Dude! You are awesome! These are practical applications form a toy! YHWH bless you in everything you do!
Nice welding. I just started welding whit stick in my garage to get my bike ready. Took 1 pack of sticks and then I got it. Now bike is ready for winter :)
This is amazing,and exelent,I would like to have bike like yours 😀 great work bro,you are smart.
I'm very impressed at the part you made freewheel crank.
Kinda what I was looking for.
Spot welder all ya need...
Cool build, I've never seen somebody make a freewheel crank before. I think it's easier connecting the motor with chain to a new chain sprocket on the back wheel hub(which already has a freewheel). Cheers!
yes but some of those wheel-mounted sprockets mount via rubber clamps on the spokes - also keeping the motor in the driveline constantly. From what I can see, looks like his means you're not fighting the motor when pedaling and removes unbalanced stress from the spokes. It's actually a pretty smart method. Setups like that for those 2 stroke petrol (gas) motors are pretty expensive and this is the first time I've seen someone create one for an electric motor. If my bike crank was a 3-piece instead of 1 piece, I'd be trying my hand at this - for now I'll save it in case I get a chance to in the future.
Hell, if I hadn't just given my unfinished tadpole recumbent trike away I could have built one for that
But in that case you cannot use the back gears 😅
More strength and torque available in the front...crank area..
GREAT VIDEO!!😄😄
A grinder and paint make you the welder you ain't!
All joking aside, nicely done. Your video showed all the essentials and didn't waste time.
Very impressive, great skills!
Thank you, because you shared your idea with us!
MABUHAY!!! SUPERRRRRR GALING TALAGA MGA FILIPINO!!!! THANKS FOR SHARING...MAHAL NG MGA E-BIKES D2 SA GERMANY...GUSTO KO RING GAWIN YAN KASO WALA AKONG GAMIT...
Very resourceful. Nice job!!
this guy is the only legit diy guy, keep up the good work!
Amazing ...I like the simple parts your creating. like not just buying new parts.
И одни восхищения. А ни кто не усмотрел, что фривил на двигателе не может так работать. Там возможно установить только намертво звезду. И если разрядится батарея, то придется маслать педали и вращать мотор .
Very wise , infact i was trying to make a free wheel sprocket but in vain. After watching this video it's look so simple and will just do the same thing. Thank this video is of great importance and very helpful.
He did well... Only concern if too much torque is applied to such a crank and it internally snaps or falters at speed or under heavy torsion... A locknut mechanism could be attached somehow?
Parabéns pelo projeto.
Simples, funcional e perfeito.
Great video, your fab skills are impressive
Such a clever chap. Well done.
Love this kinds of videos.. make something out of almost nothing some old metals some clamps an old hoover board.. cheers from the netherlands.
Excellent work and ingenuity.
Nice job... congratulations. From engineer to engineer.
Молодец парень! Сделал электровелосипед, имея только болгарку, сварку и шуруповерт, а самое главное - голову на плечах и руки из правильного места !
Вотыменно что руки из правильного места растут у этого парня.
И гироскутер. Лайк за фривил на педали
Great video.
And great work ! :-)
Astig!
Parabéns! este é um dos melhores projetos deste porte que já vi por aqui.
Im doing this with my bike :-) half way through just need to order a few parts to carry on I need new bottom bracket as mine isnt long enough to accept the freewheeling crankset but ill get there......excellent video mate no doubt this will help a lot of people
Nice project man. Congratulations!
Bravissimo. Bel progetto. Molto semplice ma funzionale.
Hope your president supports local talents such as you. Sana suportahan ng gobyerno mga young inventors/innovators na katulad mo. More projects please.
nanjan nmn si TH-cam na kayang supportahan ako.
You're a genius my friend.. Congratulations.. A mazing job..
Really good job mate!
very creative, good job bro!
Albert Nario...MIL FELICITACIONES POR TU INGENIOSO TRABAJO!!!!INTENTARÉ HACERLO!!!LIKE!!!
Nicely done!
MrGuyfella 5g
The construction with the chains is very well thought out ;)
Is too creative. Nice job! I tried in my bicicle...👍
Perfeito ! Excelente explicação parabéns 👏👏👏👏👏
You are a genious mecanic! No centering tools, just your two hands and your brain, and slippers :-)
impressive! @ All: did you see how the batterie was made: a bunch of Li-eon rechargables, put serial and parallel. Just like in a Tesla... no joke.
Your idea is fantastic, thanks and congratulations.
Sensacional...
BFDSFEED
BFDDFEED
Good idea.
This is awesome, good reuse of materials
Good Having a Brain to work with. Nice Job !
Better than showing people how to hack into peoples gadgets. You inspire young people.
Great skills !
Great work and effort
You made this with stuff you had . Proof you don’t need to go and buy everything new and just bolt it on.
Nice job... I knew there had to be a use for those hoverboards!
top job and top video thankyou albert
Freewheel crank good idea, thanks man.
Bonjour. Superbe réalisation. Je vais m'en inspirer. Merci du partage.
Brilliant just brilliant great skills makes me want to go out in the garage
Great diy! A belt driven system will be more efficient, you can Free part from old stationarity gym bike, MOP... great
RUS Молодец парень ,я давно уже задумывался о такой фтулке с трещёткой,ты гений!!!!
excellent and super cool albert keep it going
Good work, Mister Rust !
Brilliant. Well done.
Good video so awesome..from Phoenix az here
Buena idea desde México , Veracruz te felicito
Can you provide a link to the motor controller used in this project.
Man you work with metal as if its paper. Those are some good skills.
Nice..how long does it last
This is why every man needs a large shed/workshop or a garage :)
PAREEEYY ANG GALING MO.. GAWA KA PA NG MEDJO MATINDI...! hehe..! GODBLESS AND MORE POWER BRO!!
Siempre me han gustado tus videos sigue asi!
Genius bro!
Great job 👍
I love it when you do those modifications on a low budget. Congratulations
Excelente ideia
Your smart and creative!
Great job!
You are very intelligent! Congratulation!
Nice job pal
Tell me if this motor despitewhat in the front wheel of the bike will not it hard to pedal if you drive only using the pedals,not the wheel to give resistance?
What is power of the batery? How many amps and volts?
Dude you kickass.
Very good idea. Thank you ...
فنان من تصليح الدراجات الهوائية
Красавчик!!! Просто и эффективно