Nissan NP300 Aluminium Upper Control Arms - Install + Setup (D23)

Dobinsons Aluminium Series Upper Control Arms feature adjustable camber and increased castor and wheel travel, specifically designed to give you more clearance around the coil tower and more wheel droop. Learn more about how to install and adjust these UCAs for the Nissan Navara NP300
Visit our website or contact your local Dobinsons dealer to grab yourself a set today!
Shop now: dobinsons.com/nissan/niss-86/...
Follow Dobinsons Spring & Suspension:
www.dobinsons.com
/ dobinsonssprings
/ dobinsonsspringandsusp...

[@whitenp_adventures4810]

Mint video Ben. Found out some new info I didn't know about on my new arms you guys installed. Very happy with the new UCA's 💪👌

[@Crazierfrog]

Would these work on a d40 navara?

[@Theincrediable1413]

After installing the compete kit into a NP300, should the new suspension feel regid at the beginning or softness should be felt immediately? I have a new kit with less than 300 kms but still feel very stiff, specially when both wheels fall into bad road.

[@marcusbarnes5929]

My px3 ford ranger dobinsons MRA lift kit getting installed in 2 weeks time.
How far away are the billet aluminium upper control arms from being released for the ford ranger?
I went 3 inch front 2 inch rear.

[@kanevivalakane3699]

Hello Sir.
I want to add 2 inches of Dobinson lift kit in front and rear to my Prado 150.
Should I get Dobinsons IMS or the regular yellow ones?
Do I need to get spacers as Prado leans on sharp turns or roundabouts?
What should be the front springs- C59-352?
Rear Springs C59-325?
Front Shocks IMS59-50700
Rear Shocks IMS59-50705.
Sorry for asking a long question.

[@danielsookraj2155]

Can the upper arm that you have work with a Nissan Titan 2004 6 inch lift?

[@localkane7044]

Does it fit with frontiers?

[@kevinalzar4614]

Installed on Xterra 2015 and i’m facing an excessive positive caster issue. Tyres are touching the fender liner(rear side). Is it normal for this upper control arm?
Any advice to rectify this issue with proper alignment.
Thanks..

[@DobinsonsSuspension]

Hi @kevinalzar4614 - Have you had a wheel alignment since having these arms installed? If you have any other issues please reach out to [e-mail]!

[@kevinalzar4614]

@@DobinsonsSuspension Thanks for a prompt reply. Yes, we did the alignment.
Minimum that we can do is 4.8 degrees caster, 0 camber and 1.2 total toe.

[@Pix8176]

Will these be available for the MN Triton? Just had a MRA lift kit put in and absolutely love it.

[@DobinsonsSuspension]

Hi mate, yes our Aluminium Series Upper Control Arms are currently in testing for the Tritons! Keep an eye on our socials for when they become available

[@Pix8176]

@@DobinsonsSuspensionhow are these coming along? I just looked on your website and it seems there is nothing there yet?

[@DobinsonsSuspension]

@@Pix8176 Hi Pix, I have updated the stock level of the Upper Control Arms on our website 🙂

[@DobinsonsSuspension]

dobinsons.com/nissan/niss-86/niss-86_front/niss-86_front_control-arm/niss-86_front_upper-control-arm/niss-86_front_upper-control-arm_uca45-205k-detail

[@Pix8176]

Sorry I must have misunderstood. Have the ones for the Triton made it into production yet?

[@marcusbarnes5929]

Will these be available for the 2021 ford ranger px3.?
Very well engineered UCA

[@DobinsonsSuspension]

They are currently in the development stage for the PX3 mate!
Appreciate the kind words

[@marcusbarnes5929]

@Dobinsons Spring & Suspension I will keep an eye out for them.
Been doing my research on lift kits for the px3 ford ranger.

[@marcusbarnes5929]

@Dobinsons Spring & Suspension I just ordered the dobinsons MRA 3" inch front and 2" rear lift kit..
I'm real keen to get the dobinsons billet upper control arm when it's available for the ranger PX3.