FINALLY LOWERING MY CAR AFTER 7 YEARS !!!
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- Thank you for checking out my install video!!
I know it wasn't a full in-depth video on how to install the springs but I'm slowly trying to learn to record and work at the same time. The springs are RSR Down Lowering springs. Hopefully you like the video and I'll continue to improve on how to do this TH-cam thing lol.
Please LIKE, COMMENT, and SUBSCRIBE! Thank you all for stopping by. More videos are coming soon!!!
Kenny Vo
/ @kennyvo
Instagram @texus3is
NSPIRE Merch
www.nspire.shop
Instagram @nspire.jp
/ nspire.jp
Check out my Instagram:
@kanbo_11
/ kanbo_11
For Business Inquiries:
kevinly.contact@gmail.com
Equipment:
Sony A7iii amzn.to/3tcPj0A
Sony 20mm F1.8 amzn.to/3sk4QMS
Rode Microphone amzn.to/3tIQw0X
Music by LAKEY INSPIRED
Track: “In My Dream”
• LAKEY INSPIRED - In My...
The Milwaukee Impact is a beast.
I heard young dude say he was happy it was worth the money. He will have that impact the rest of his life.
Definitely worth the money. Buy nice or buy twice.
Yea the Milwaukee is really nice. Can't complain about it.
That was definitely a UPS delivery driver lmao 😂 video 10/10
How are the springs holding up? Any thoughts on the changes in ride quality after installation? How much lower did they get after breaking them in?
Springs has been great. I honestly don't really notice the ride quality maybe little more stiffer but I don't pay attention to it. I would say about 2 finger ish gap. My front went from about 3 fingers to about 1 finger gap
@@Kanbo11 did you or would you need anything else lke new adjustable cambers to drive normally with alignments and such, or are you okay with just the springs?? Thanks
I’ll subscribe and share just make this channel build more lexus 😂
😂 Got you 👍🏼. Got a video over Nx200t coming up
Grease on the face...nice..real mechanics.
😂 can’t never stay clean
I'm about to install swift springs into my is350, thanks guys. - UPS gang
Did you need anything else like new cambers to drive normally with alignment and such?
You should go get an alignment. Anything with suspension you will need to do alignment to be safe
@@Kanbo11 i know for sure alignment. But i was trying to ask if you had camber angles after the drop? And after your alignment... were your camber still withing factory spec?? Thanks bro
I don't have any camber kit on my car.
My guy what are your wheel specs ? This is exactly what I'm looking for stance wise with aftermarket wheels
Spec is in my Mod list video
How much did the front springs decompress after you took the spring compressors off?
Great video! Lowered on Superdowns myself, What exhaust do you have on the car??
I have Joe Z axleback with Invidia midpipe
yo whats the update with the rsr springs? are they still running fine til this day?
Have you had any rubbing issues since you installed the springs? Thinking about some Tein S Techs and have a similar fitment in the rear and a little wider offset in the front.
No issue so far. No rubs or anything
That acting is top notch 🤝
Hi. Nice vid. Thanks for posting. I'm planning to lower my "10 IS250C. I read in the comments below that after 2-3 years they were holding up just fine and didn't take away from your ride comfort. My goal: "Clear the gap" on my OEM wheels without losing ride comfort (fronts: 3" gap and back: 2.5" gap) Whatchu think will the RSR Down's do the job? Or maybe, I'd need something that can go just a tad lower, any recommendations? I'm trying to stay away from the $800-900 coilovers (Megan, BC, or Tein). Appreciate your time! 💯🙏
Hi thanks for watching. I think rsr down is only like 1.5 inch lower so if you’re planning on drop 3” I would do super down. Ride comfort is just a bit stiffness to compensate being lower. I understand you don’t want to do coilovers but that would be my suggestion. With coilovers, you can do a high/low you want and adjust stiffness. But if not rsr down is good. Just look at pictures out there to see if that’s how low you want to go
@@Kanbo11 Thank you very much. I spoke to RSR Customer Service, they do not offer "superdowns" for my model . I guess coilovers it is... Unless there are some lowering springs your can recommend that go a bit lower than the RSR "downs"?
@@brianyt56 I don't know much about your car. Coilover is more money but will be better overall
Now that you had it lowered for awhile with rsr down springs do you still recommend this over the super downs and half downs?
Springs depends on how long you want to go. Everything else is same ish. But I would recommend just saving up for coilovers
I've had my 15 GS350 F for 7 years and just purchased swift springs. How do you like the ride overall? Pros and cons...
When I had the spring, it wasn’t bad. Little stiffer than stock but if I had to do it again I would just get coilovers
@@Kanbo11 Coilovers that much better?
@@Kanbo11 overall experience with the RSR down?
yes
Coilovers= adjustable for height and stiffness. Spring is set at whatever you bought. After awhile your strut will start going out with spring
What rims are on the silver Lexus lol
I think they were Vossen x Work wheels
Hey great video. Any issues with these springs ? Rubbing etc. Also did you need to buy a rear camber kit?
Thank you. No issue so far. I have half down and my friend has super down and not issues from spring beside blow strut but that's normal from long use.
I thought in the video you said you bought Downs?? I'm thinking of getting them for mine . And did you also change your LCA bushing.. no issues with rear tire wear either?
Oops sorry yea I have downs not half downs. I did do my bushing and I have a video for it already up on my channel. Tire wear isn't too bad just little more on the inner but nothing crazy
Still since you did your bushings? Or is it in the rear?
Oh sorry front is fine. Rear just has that normal inner wear with natural camber
can you link your LCA bushings?
Would you consider the superdown ones instead? I'm trying to lower my is as well. But can't decide on there or superdowns. Yours looks great by the way
My rear is fine for me but my front could go little bit lower. My friend has super down. TBH ride quality on super down is ehhh. I would go coilovers if you're going to try to go that low. Other than that Down is 👍🏼
After almost a full year of having these on, how do you still like them?
I like them but I want to go little bit lower lol. I want something little bit stiffer also. But overall can't complain much for the look
Sok Sabai man! Hey are those half downs or super downs? I'm bout to order for my Awd 3is but kinda torn on wanting real low but afraid of rubbing..also yours AWD too right? So same steps?
Sok Sabai!!! 🇰🇭. I am on Down which is the middle one but mine is RWD. My friend is on super down. If you go super down I would say save up some more for coilovers
@@Kanbo11 what type of tire ur using?
Front were Michelin Pilot Super Sport and rear were Firestone Indy 500 @josh
Do you need a alignment after ? How do you like it so far with the springs
Yes I did need an alignment. Any thing with suspension you should do alignment to be safe. Springs is good. But if you have the chance to get coilovers you should do that instead
@@Kanbo11 thanks man think I’m gona order some springs tonight
Yea springs if good for the budget. After awhile though you're struts will wear out
Was it hard to get the very bottom bolt on the rear on?? When I was doing mine the control are kept getting stuck on that bottom bolt, I have no idea why if everyone else on TH-cam didn’t remove that bolt. I didn’t wanna take it off so I’m stock in the rear and low in the front Lmaoo
Yea it wasn't too fun but doable. I would take all the bolts out I mentioned in the order I said so it'll be easier to do. Having a friend helps alot because you need leverage. It took us like an hour ish to figure out but then took us like 15 minutes to do the other side lol
just did this on my 3is last month .... if youdont already, you need LCA's tho. for real.
I already did my LCA bushing. I have another video about it. If you would like check it out 🙏🏼
Did you have any spacers on for these RSR Downs?(:
I did if I was running stock wheels
Could I be good on LEXANI 20’s ?
Tire size
235/30R20
I wouldn’t know much about 20s. You can look up on the forums or FB group for more information
I can’t help but notice the squeaks towards the end of the vid, my IS makes the same noice even after replacing new pads, has yours been like that?
What kind of pads did you use?
Brembos
Take the pads off and spray some Anti squeaks on the back of it
Thanks bro✊🏽 btw love the khmer gas cap🤙🏽
Thank you! Always representing. Your Khmer too?
Did you have any issues with the tires rubbing after the drop? Mine are catching 😭
I didn't have any issue when I had that set up. What's your set up?
I want to lower my 08 350. I do normal daily driving.
Springs or coilovers?
If you got extra funds I would say coilovers. You can adjust stiffness and height whenever you want
New sub here broo! Nice content, yall cool as heck 👌
Soooo tough. Just got the same springs for my 2020 rolla se sedan. Are those the Downs or SuperDowns?
They are Downs
yo can i get an update on yr corolla on rsr springs? hows the quality?
@@DreiiTV they’re great. I’ve had zero problems with them
Did you guys torque down to specs or just hand tighten?
We didn't torque down to spec. We had an impact then hand tighten just to double-check
Bro im new suscriptor . Whats the tires setup and wheels. It looks dope !
19x8.5 front +35 19x9.5 rear +40
235/35/19 255/35/19
y’all installing coilovers anytime soon?
We would like to if we can find a good deal locally lol
What’s your wheel set up?
I'll be honest I can't remember. It was long ago sorry lol
Hey bro I’m having trouble finding them I see down sus springs are those the ones you got ?
This is what I have. Just make sure it fits your car. www.rs-r.com/product/lexus-is-250350-rwd-down-sus-springs-2014/
@@Kanbo11 perfect thank you bro my Lexus needs this drop bad you got a subscriber 🙏🏼
Thank you for subscribing!!! It means a lot👍🏼. Got some more contents coming real soon
Any warning lights?
Nope no lights. A year later and no issue
Had my car for a year now and still considering lowering it on RSR downs as well. How’s your car so far with the springs?
Sorry for the late reply but it's been great. You can feel the roads more but everything else is fine beside trying not to break things or scrap roads and ramps lol
@@Kanbo11 I don't have mine lowered and still keep scraping the front lip everywhere I go during parking or backing out. Can only imagine how much worse that would be if the car is lowered
Yeaaaaa our front bumper has scope down so I was scraping places too before but now I got bags…..I still scrape haha
What is that sensor that they remove in minute 8:12?
The AVS Adaptive Variable Suspension. If you have f sport package and that option on your car you need to remove it first
What lip are you using
The lip I had was this one
amzn.to/2WoYApT
Where is this FRONT LIP FROM!!!
Sorry for the super late rely!! I just saw this. The lip I had is this
amzn.to/3kJfk5k
and same Lexus
Yooooo, 那狗屎是火🔥
How much does it cost?
Springs itself is $279 if bought new. Then labor depends if done by a shop or diy
yall from Houston
Yes we're from Houston
Any Lexus Meetup groups in Houston or car shows y'all do I live in Deer Park
There's a few groups that do meet up but most of the meets up like around Katy or i10 area
that's cool with me lmk thanks bro
I’m cambo too
🇰🇭🇰🇭🇰🇭
Spec on the wheels ?
19x8.5 front +35
19x9.5 rear +40
What tire sizes?
235/35/19
255/35/19
You seem cool af but that blonde hair got me f
12:17 this part is a fucking bitch to install. It's so hard to align the holes.
Yea wasn’t fun. A lot easier with two people
hmu for 1 day shipping
As a black man, listening to you talk like that is insulting. Be yourself. When the cops come, all that yo G, homie shit is gonna go out the window. Being yourself is cool.
What are you talking about lol?
YO HOMIE keep doing you G
Car looks DOPE