The video was helpful. I was confused if I should leave window up or down. But the blame here is on Nissan. Why didn’t they leave an access door to the handle so that we don’t have to take all that stuff off? Not all girls come with a boyfriend/mechanic. 🙄
I appreciate the video. I am getting ready to change my daughter's Altima handle. I got a bit skeptical when I heard you mention the words "interesting" and "intense". Knowing what I know about Nissan they over engineer everything and there seems to be a thousand extra steps to repair what should be a simple repair. I wonder how many WTFs? were said when the video was sped up in timelapse? Thanks again
Woulda been nice if u explained stuff as u did it. Instead of fast forwarding thru everything..Not good when u try to explain stuff after the fact instead of why u are doing it..Good thing there are clearer vids of this on u tube that actually explain stuff.. Great try though...
Good video. This job is a bit of a pita but worth doing yourself, all I’d recommend is putting some strong tape over the top of the door holding the glass up, makes it easier for realigning the power window bolts
worked great thanks alot. for me the 2 hardest parts were getting rods back onto new handle and more so remounting motor and arms so window goes all the way up and all bolts line up on inner metal panel. was pain in the ass but its done!
I only wish mine worked when it was replaced. Tried the blue adjustment where the rod sits, but seems like it's off by 10mm. Compared the new handle with the old and looks identical. Can't figure out why it doesn't work. Handle works from the inside also works from the outside if I manually push the blue plastic where the rod sits.
The new after market door handles are stronger than the original ones? if not you will have to do this over and over again, I got 3 broken ones so far, Nissan got great engines but cheap plastic japanese parts.
RICHARD F yeah we have found a wide variety of quality when it comes to plastic parts, the door handles especially as they are used as levers, APDTY has been selling door handles for over 14 years and we spent the first 6 years going through a few sub par manufacturers, we now have a manufacturer that reinforces the handles, especially the weak points, they have been excellent and we don’t worry about them anymore, lots is options exist online though and cheaper is definitely not always better
You need to watch 1A video on this! You took off unecessary bolts for the MOTOR AND THE WINDOW TRACK GUIDES AND FAILED TO REMOVE THE TWO BLACK STICKY COVERS TO REMOVE TWO 10 MM BOLTS TO DISCONNECT THE WINDOW
I reattached the original broken handle, using a combination of super glue and baking soda. I still have the aftermarket replacement handle at the ready, should the patch job fail.
I followed this method of leaving the glass in, and it worked fine. I rather not remove the glass from the door. I unbolted motor and window track from regulator as shown in video.
I can't figure out how the rain gutter inside the door goes....it kinda just rattles around and is loosely attatched and it doesn't fit behind door glass.....
Thank you for the video but it's a total fucking nightmare I wish I knew before I start pulling everything out... here's a little tip: you do not have to remove speakers, there are two little holes that covered my round tape and I recommend you to srew in track first, before you screw a cover all the way around. It's easier that way to play around with a cover then trying to align holes on track for the bolts. Also lower down a window just a little bit if it's all the way up.. u gonna have big pressure on a track and it's very very hard to put them back on
It's optional and recommended but not required. This guy did the job the hard way. The easier way is to take the window out and keep the window regulator intact with the sub-panel and remove the whole unit.
Nah, its easier to do. This guy just didnt know what he was doing, and just went off trial and error or guesstimating for a lot of it, figuring things out as he went. Not a very good diy video
@@Brumasterj yes, I think its A1 Auto. They have a bunch of diff repair videos. Just search altima door handle replacement. Look for 2002-2006s, and look for driver (or passenger) or rear door vids.
I have a 2004 Nissan Altima which ALL FOUR door handles have broken in the same exact fashion in which this guy is fixing. HOW about, instead of repairing these after a few years, you guys make a door handle that actually lasts as long as the car does? Novel idea, I know. ALL FOUR. I have NEVER had a car (and I've had plenty of different makes and models) where the door handle broke. Not once, not twice, not three times, but ALL FOUR. Love your cars, your door handles suck.
Don Snyder yeah so your beef is with Nissan and really all the other car manufacturers that design these car, we are an aftermarket parts company and in the same boat as you as we r just trying to help fix the car back to its original condition for as low a cost as possible, when possible we redesign a part but the cost of that is extreme and we have over a million part numbers so we can only do that on very small quantity of part numbers
@@APDTY 3d printer is the key my friend. Just 3d scan one of the handle for the size. People can 3d print the whole Ironman suite and cant 3d print a stupid altima handle? :D Thanks for the video tho.
@@chronomatica I noticed the cuts as well and he probably received them from doing unrelated work on other cars. I have a lot of experience with repairing and replacing window regulators and my hands never get chewed up like that.
Very cheap plastic door handle from factory! That's why they break off. I purchased a new metal after market one to install. But after watching this video, I think I will just gorilla glue the old one back on, again. It will last for several months.
DO NOT FOLLOW DIRECTIONS IN THIS VID... THIS IS COMPLETELY WRONG...WATCH OTHER VIDS ON THIS FIRST AND JUST PULL THE BOLTS AROUND THE OUTSIDE EDGE OF INTERIOR PANEL...THEN PULL THE 2 WINDOW BOLTS AND REMOVE IT... PANEL WILL COME OFF WITH EVERYTHING ON INSIDE ATTACHED...AGAIN DO NOT PULL ALL THE BOLTS ...YOU WILL CAUSE YOURSELF A LOT OF EXTRA WORK AND AGGRIVATION... You need to pull this vid you told people the hardest way to try to do this... With the most work and aggrivation.... AGAIN DO NOT FOLLOW INSTRUCTIONS IN THIS VID...WATCH OTHER VIDS ON YOU TUBE FOR THE ACTUAL WAY TO DO THIS AND A LOT LESS WORK (EASIER)
The video was helpful. I was confused if I should leave window up or down. But the blame here is on Nissan. Why didn’t they leave an access door to the handle so that we don’t have to take all that stuff off? Not all girls come with a boyfriend/mechanic. 🙄
I appreciate the video. I am getting ready to change my daughter's Altima handle. I got a bit skeptical when I heard you mention the words "interesting" and "intense". Knowing what I know about Nissan they over engineer everything and there seems to be a thousand extra steps to repair what should be a simple repair. I wonder how many WTFs? were said when the video was sped up in timelapse?
Thanks again
No sheet A 15 minute video with over 45 minutes fast forward . A true god forsaken nightmare. My car has three out of four broken
Woulda been nice if u explained stuff as u did it. Instead of fast forwarding thru everything..Not good when u try to explain stuff after the fact instead of why u are doing it..Good thing there are clearer vids of this on u tube that actually explain stuff..
Great try though...
Got a love it when you're missing a screw or when you have one extra.
Good video. This job is a bit of a pita but worth doing yourself, all I’d recommend is putting some strong tape over the top of the door holding the glass up, makes it easier for realigning the power window bolts
worked great thanks alot. for me the 2 hardest parts were getting rods back onto new handle and more so remounting motor and arms so window goes all the way up and all bolts line up on inner metal panel. was pain in the ass but its done!
I only wish mine worked when it was replaced. Tried the blue adjustment where the rod sits, but seems like it's off by 10mm. Compared the new handle with the old and looks identical. Can't figure out why it doesn't work. Handle works from the inside also works from the outside if I manually push the blue plastic where the rod sits.
Thank's for an excellent video
You saved me $ 500 dlls
The new after market door handles are stronger than the original ones? if not you will have to do this over and over again, I got 3 broken ones so far, Nissan got great engines but cheap plastic japanese parts.
RICHARD F yeah we have found a wide variety of quality when it comes to plastic parts, the door handles especially as they are used as levers, APDTY has been selling door handles for over 14 years and we spent the first 6 years going through a few sub par manufacturers, we now have a manufacturer that reinforces the handles, especially the weak points, they have been excellent and we don’t worry about them anymore, lots is options exist online though and cheaper is definitely not always better
Its way easier to take the window out before taking off the black inside panel. You have more room for your hands.
You need to watch 1A video on this! You took off unecessary bolts for the MOTOR AND THE WINDOW TRACK GUIDES AND FAILED TO REMOVE THE TWO BLACK STICKY COVERS TO REMOVE TWO 10 MM BOLTS TO DISCONNECT THE WINDOW
Where's the link
I reattached the original broken handle, using a combination of super glue and baking soda. I still have the aftermarket replacement handle at the ready, should the patch job fail.
niceeeeee!!
did it ever break again?
@@stanleyhudson1721 the next day
YOU SHOULD CALL THIS VIDEO "THE DOOR HANDLE FROM HELL"
Where can i get that little access panel i have missing ones
for my altima someone help.
I might have to take some out of other altimas
I followed this method of leaving the glass in, and it worked fine. I rather not remove the glass from the door. I unbolted motor and window track from regulator as shown in video.
BUEN VIDEO AMIGO ME AYUDO MUCH9 SALUDOS..DESDE MATAMOROS MEX..
I can't figure out how the rain gutter inside the door goes....it kinda just rattles around and is loosely attatched and it doesn't fit behind door glass.....
GOOD MAN JOB WELL DONE👍👍👍👍👍
Thanks for the good video. Just ordered two handles from your site. I like that you say you guys sourced more gooder handles.
If I put it bad and my door doesn’t open what can i do?
How much is the labor cost?
I would expect a mechanic to charge from one to 1.5 hours labor per door handle.
Thank you for the video but it's a total fucking nightmare I wish I knew before I start pulling everything out... here's a little tip: you do not have to remove speakers, there are two little holes that covered my round tape and I recommend you to srew in track first, before you screw a cover all the way around. It's easier that way to play around with a cover then trying to align holes on track for the bolts. Also lower down a window just a little bit if it's all the way up.. u gonna have big pressure on a track and it's very very hard to put them back on
So window removal isn't required?
It's optional and recommended but not required. This guy did the job the hard way. The easier way is to take the window out and keep the window regulator intact with the sub-panel and remove the whole unit.
You lost me at "and another 10 mm bolt"
Could I just pay a mechanic to do this for me 😂 I don’t trust myself
Nah, its easier to do. This guy just didnt know what he was doing, and just went off trial and error or guesstimating for a lot of it, figuring things out as he went. Not a very good diy video
papitosabe is there a better video? I need to do my door
@@Brumasterj yes, I think its A1 Auto. They have a bunch of diff repair videos. Just search altima door handle replacement. Look for 2002-2006s, and look for driver (or passenger) or rear door vids.
@@papitosabe I buy some of parts from them as well
I drove a car like this once and I loved it
I don't think anyone has ever said they "loved" this year Altima lmfao
I have a 2004 Nissan Altima which ALL FOUR door handles have broken in the same exact fashion in which this guy is fixing. HOW about, instead of repairing these after a few years, you guys make a door handle that actually lasts as long as the car does? Novel idea, I know. ALL FOUR. I have NEVER had a car (and I've had plenty of different makes and models) where the door handle broke. Not once, not twice, not three times, but ALL FOUR. Love your cars, your door handles suck.
Don Snyder yeah so your beef is with Nissan and really all the other car manufacturers that design these car, we are an aftermarket parts company and in the same boat as you as we r just trying to help fix the car back to its original condition for as low a cost as possible, when possible we redesign a part but the cost of that is extreme and we have over a million part numbers so we can only do that on very small quantity of part numbers
In same boat, all for of my door handles broke on my 2005 Nissan altima
That’s an old car anyway and there are components that start to dry out and give way after almost 10 years so with a 2004 I could just imagine.
@@APDTY 3d printer is the key my friend. Just 3d scan one of the handle for the size. People can 3d print the whole Ironman suite and cant 3d print a stupid altima handle? :D Thanks for the video tho.
Chingadera I just fixed one broken door handle and the other one just broke,thank you Nissan your parts sucks.
That's why I recommend changing all four at the same time.
"Thats pretty intense" lol
14:36 His face hahahahahaha
I thought it was going to be easy. But nvm I’ll just pay a mechanic lol.
Exactly what I was thinking by the look of his hands I rather pay the guy and save those cuts that's always how my hands end up when I try to fix crap
@@chronomatica I noticed the cuts as well and he probably received them from doing unrelated work on other cars. I have a lot of experience with repairing and replacing window regulators and my hands never get chewed up like that.
This poor man doin everything with a ratchet RIP
Ryan Baux not everyone have power tool I don’t have one . They’re expensive so I’m saving up .
fuck.... a bunch of this
This Altima wasn’t have glass right
Very cheap plastic door handle from factory! That's why they break off. I purchased a new metal after market one to install. But after watching this video, I think I will just gorilla glue the old one back on, again. It will last for several months.
It will last several months and then you'll be back at square one.
He means well, but it is not the best video on the subject
DO NOT FOLLOW DIRECTIONS IN THIS VID... THIS IS COMPLETELY WRONG...WATCH OTHER VIDS ON THIS FIRST AND JUST PULL THE BOLTS AROUND THE OUTSIDE EDGE OF INTERIOR PANEL...THEN PULL THE 2 WINDOW BOLTS AND REMOVE IT... PANEL WILL COME OFF WITH EVERYTHING ON INSIDE ATTACHED...AGAIN DO NOT PULL ALL THE BOLTS ...YOU WILL CAUSE YOURSELF A LOT OF EXTRA WORK AND AGGRIVATION...
You need to pull this vid you told people the hardest way to try to do this... With the most work and aggrivation....
AGAIN DO NOT FOLLOW INSTRUCTIONS IN THIS VID...WATCH OTHER VIDS ON YOU TUBE FOR THE ACTUAL WAY TO DO THIS AND A LOT LESS WORK (EASIER)
You really need to work on something first before trying to teach others how to do something. Not trying to be sarcastic, just stating the facts.