HOW TO UPGRADE YOUR UNIVERSAL Li-ion BATTERY PACK |PARKSIDE|
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Hello guys, today i am gonna show you how you can upgrade your li-ion battery pack. For my example that is parkside universal X20V Team battery pack. You can use this option for any type the universal li-ion battery pack.
Good luck.
Spot Welder: www.aliexpress...
Spot Welding Pen: www.aliexpress...
LiitoKala Lii-HG2 3000mAh 30A: www.aliexpress...
Battery Nickel Strip 02.8.10m: www.aliexpress...
1S-8S Battery Voltage Meter: www.aliexpress...
LiPo Battery 3S 11.1V 5000mAh 60C: www.aliexpress...
Magnificent! It is gratifying to see how you managed to improve an ordinary battery and expand its capacity by 50% without visible modifications.
I have seen that some modify unused batteries to be able to connect them to AC with a notebook charger, it is possible to do it with the battery you show in the video.
There are times when I'm home and the batteries are completely discharged, I need to do some quick work and it would be great to be able to plug it into AC and get started right away.
In the videos I have seen the batteries only have a positive and negative cable, but Einhell and Parkside have batteries with similar structures.
Thanks for your time.
It turns to bad way.
good to see someone who know what's his doing ! this spot welder is pretty good to !!!!
Very sophisticatedly executed.
Watched it, understood it, absolutely positive I'm not able to do it... :)
Parkside batteries have a lower capacity than 18650HG2 but have lower internal resistance than 18650HG2 produced in China, so an original Parkside battery supports higher currents than 18650HG2.
Շնորհակալություն.
Շատ օգտակար էր 👍
Եթե ունեք հարցեր կարող եք տալ։
Ո՞ր տեղից կարող եմ առնել , մարտկոցները էլեկտրական պայկա անող գործիքից։ Վայլբերիսում կա՞, ի՞նչա կոչվում
I've done the same with the 12V version, but the main aim was achieve the same power of the 4Ah version using less resistance cells, I used the Sony VTC-5, everything went well: low weight and high power.
Hi, friend. Just a question: the VTC5 is a high drain battery (30 amps) commonly used in vaping devices and it is completely different from the 18650's used in flashlights or in laser pointers, which are low drain batteries (maybe around 4 amps). Does it make any difference between using high or low drain batteries to do this type of update to our drill battery? I've heard if you don't use the proper battery, you could have some problems, maybe overheating while using it or something else "not good" for your drill, but IDK it for sure, so i'm asking. What do you think?
@@N8SANZ the lower the impedance the better current battery, the motors are really hungry of current :)
If you use low current battery the tool is weak, the manufacturer usually give the possibility to use a bigger battery with parallels of 2 or more elements, in this case is not so critical the quality of the single cell.
Use high drain cells !
The higher Ah is not usefull !
High drain and not the high Ah (with worse not low inner resistant) cells.
Ok ?
If you spot weld try to weld 3 times to contact the nickel plate for better electril current.
But 2 times spot weldeing is common.
@@callishandy8133 Why the higher Ah is not usefull?
does not increase the duration of operation of the tool??
@@handballfield6326 a cordless drill when in use, like drilling concrete or metal, draws a lot of current. if you use low discharge current cells, the tool will not have the demanded power and will stop all the time. the higher the capacity of a battery (say 3500mah) the lower the discharge current. you want a cell that both has higher capacitry and high discharge current. 18650 have reached 4000mah in capacity but with only 4amps of discharge. this battery is only suited for a flashlight where discharge current is already low. for a power tool, you can get a 3000 mah battery with 30 amp discharge current.
The 2ah battery has current limiting. Should have done this to the 4ah battery pack instead. In truth the Parkside 18650 are excellent value for money and have a 3 year warranty.
Great conversion but problem is that these 300mah batteries have a max 20A discharge rate. Lower 2000-2500 mah can go up to 30-35A discharge.
The battery discharge rate is more important as this will give your tool power.
Now you have 5x18650 say 20volt at 20A discharge is max 400watt discharge power.
when using a 2000mah or 2500mah at 30A the discharge rate is 20V x 30A = 600 watt.
Using these batteries the battery does last longer but your tool has far less power.
U are right, but Parkside DC motor can not stand 20A+ current. In this case the higher capacity is better than the higher discharge rate because it lasts longer.😉
@@norbithehun it's about peak power not continuous. When you press the button then the voltage will drop a lot and the tool will disable itself. Also the batteries has a max output of 20A but it is a peak current and not continuous their capacity drops when more current is pulled and this leads to lower capacity (and higher voltage drop). When the battery is left without using it then it will restore it's capacity in some time. Except when your tool needs a low power let's say a LED lamp then you will need more capacity so it can last longer. That is the reason the performance batteries are 21700 cells because they have more current output and greater capacity at higher current draw (again not for the huge capacity ones like 5Ah+).
Better to wait till batteries are sold at 50% discount. I have joined two batteries together as they were selling them for £7.50 each
LOL.. I did the exact same thing!
I just 3D printed a new battery case to hold the doubled up batteries
Nicely done! However you can buy a 3Ah battery for £15.00 , how much did all this cost?
Speeding up film is a good idea. San commentry, let the actions speak .......👍👌
Did you reset the fuel gauge ic in the battery pack or is this a simple bms without fuel gauge? (fuel gauge= the ic logging the decreasing battery capacity and not letting more charge in than the decreased capacity)
How to do this? Because that’s exactly the problem I have.
Parabéns, o melhor trabalho que eu acompanhei aqui no TH-cam...
I just use these Lidl packs for cells to replace the dead cells in my old Ryobi 2.4Ah 10 cell packs, making them 4Ah..... my last few cost £7.50 per 2Ah pack £15 per Ryobi upgrade versus £70+ from Ryobi... for new.
how long did last oem pack
upgraded the capacity but probably not the discharge current which imho is the main drawback of these 5s1p batteries
Hi. This kind of cells are not good enough for replacing. Better way is vtc5. I have checked it view times in my battery. After a while of using capacity is going down so much that I have to replace it again.
Excellent Job, but for 15€ more You can buy a 4A (comp. to the 2A)
These are smaller than 4 ah and lighter
Wow... how long did that accu lasted manufactured in january 2020 dead before November 2020 ???
Great video ! 👍
good job how you safely put an extra cover for the positive site of the batery because people dont know how explosive are
Very systematic to replace the battery
What glue you use for the thermocable ?
Creative video, thanks for sharing :)
Nice idea - but is it economical? I pay 39 Euro for the battery pack with 4 Ah and it supports Bluetooth and is with Garanten quality and warranty… so why should I take a risk?
Use your old battery pack as long it works - and then replace it. This modification could burn your house down.
BRAVO BEL video
👏👍👍👍
Top vídeo 👍🏼👌🏻🙏
Ottimo lavoro 👏
Thanks for the helpful videos, we will wait for the next videos👍⚡️💪
Good job
great video! Can you tell me about mini welding equipment? thanks in advance!
look at descriptions please
@@ARMTechHomemade Sorry, see no welding apparatus, only electrodes :-(
LiitoKala HD2 = 3000mA/4A for Lamps. Not suitable for power tools
LiitoKala Lii-31S+ =3100mA/35A
The Best battery for Power Tools
Parkside Original =2000mA/20A for engines
Hi! Have U tried LiitoKala Lii-31s+ batteries with DL24P? And what is the internal resistance of the Lii-31s+?
Thanks for your help in advance.
Thank you for sharing useful videos for society. Your approach is extremely clever!
Dear friend tell us about how is changed your tool after this upgrade, overall the performance, thank for sharing
It is very nice if you can do it (not difficult), a good experience btw. But honestly, with all the respect I wouldn't do that transition of 1000mAh. It costs more than if you would buy a 4000mAh. Now the process of upgrading your battery is what it is all this movie about... Well done 👍🏼
absolutely not mate. The chinese 18650 are like 6usd together.
@@hehuha93 You’re right for the cheap ones, but for these six browns with QR on them you have to pay three times as much, as this is one of the few decent brands of Lithium ion batteries behind the Great Wall and Firewall.
@@nakarada Judging from a very quick and dirty Google search, I'm making the assumption that these are actually rebranded LG cells.
Hi, great video. Do you have a link to purchase the round insulation stickers please.
You could probably just completely tape over the terminals with kapton tape right before you close it up and get the same effect. I think the stickers are mostly just to keep water out from rusting the casing.
Great price at the time
Does the 2A bms work with 2x5 liitokala (to6A battery)? Someone said the 2A bms not same as a 4A bms!? Thanks…
the bms is only battery number specific and voltage specific. going from 2ah batteries to 4ah batteries woill work fine with the bms cause you don't change the number of cells and you still remain to 18v nominal voltage.
PERFECT !!!
clean
I think car accum is better to use as a power source for welding cos its more reliable
Nice😊
Оригинальные на 2000 лучше, они специальные которые большой ток дают. А те что 3000 то китайцы вам могут написать и 30 000, но обещать не значит жениться. Ни один производитель не решится поставлять плохие аккумуляторы такому крупному клиенту как Lidl.
ДА ЧТО ВЫ ГОВОРИТЕ
We produce this kind of battery pack, and can produce battery packs with customized cells
you are creative
Your information is beautiful and helpful I hope to be health and safety
Good Job 👍👍
It looks like I replaced it only by looking at the battery specifications, but it probably won't work. Cells with a higher discharge amount should be used.
20A
@@georgi479 That is peak not continuous.
i heard that changing battery will reset electronic and it need to be reprogram. Is it true? Also i heard that you can use same BMS to covert 2Ah pack to 4Ah.
This is not true.
Inside drills not exist memory IC's.
In laptop battery's - Yes.
Ottima manualità
Pretty neat job! Well done!
Bravo I salute you
Neat job!👍👍
Sale mas barato y mas facil comprar la de 4ah, vale 30€ y todo lo que necesitas mas las pilas y la bateria te sale por mas de 50. Para arreglar baterias rotas pase, pero lo veo absurdisimo
Are those LG HG2'S
good job
Nice job😃
Please explain what you are doing and why...also lower the music.
I upgraded my Parkside 2Ah battery pack.Output 20+ volts.But drill machine not run.,and can't charge.(red and green light)All battery 3000 mAh ,fully charged.All same voltage.Fuse good.
I dont understand why?
What is the spot welder model please?
Is such a spot welder deadly if i touch the pins. I also want to repair my battery pack but im afraid if such. spot welder with 5KJ
yes, i wil reask the same question. please reply..
It is not even any close to dangerous. Is low voltage high current. Low voltage can't pass trough your hands. We are talking less than 20V. Harmless. Just don't put the terminals in your tongue (I mean it). Wet places are more conductive 😁
...und warum kein balancer Anschluss wie bei RC-Modellbau ?
Is it also possible to fit 5x Panasonic NCR18650B 18650 3400mA? That would theoretically be 17A strong or am I wrong?
Wow! Excellent job. Can you tell me whats that bits kit? Thanks!
Need a specific charger with balanced output for this type of battery:
LiPo Battery 3S 11.1V 5000mAh 60C
great video!
Для 20 ампер. Достаточно этих мелких точек контактов?
Wow! What a brilliant mod! Such a good job!
Brilliant to upgrade cheap discount battery? Nope
Do the new cells have the same high drain capability?
For broken battery okay but upgrade? Sure not
Many times the PCB has a lithium fuel gauge and prevents more capacity
I made it easier. I printed an enlarged case on a 3D printer. I connected 5 more cans of batteries in parallel. The capacity has increased from 2 to 4 ampere hours. The disadvantage is that the battery has become 2 times heavier! But the pulse current increased. Even with a discharged battery, the saw really saws, and does not get stuck in a tree.
ru:
Я сделал проще. Напечатал на 3D принтере увеличенный корпус. Подключил параллельно еще 5 банок аккумуляторов. Емкость увеличилась с 2 до 4 ампер часов. Недостаток, аккумулятор стал в 2 раза тяжелей! Зато импульсный ток увеличился. Даже с разряженным аккумулятором пила реально пилит, а не вязнет в дереве.
Ottimo video grazie mi interessa una batteria 18volt della Parsaide grazie ciao
Got a battery like this as a cheap battery to power robotics projects
hello, with this spot welder, can you also use lipo battery 3s 6000 mAh 60C? THANK YOU
Hello, yes you can.
@@ARMTechHomemade thank you
How is the battery still godd or broken ?
The batterys still works
Bon boulot !
two questions:
* why are the round stickers needed?
* whats the purpose of the cable that gets pasted in between 2 cells?
Thanks!
Round stickers are insulators, because the case of the battery is a negative terminal and the edge is very close to the positive terminal. The cable is a temperature sensor that cuts off the battery power if cells get too hot.
Heel goed uitgelijd !!
for what purpose is the circle sticker ?
To prevent to accidently spot weld the positive and negative side of the battery together, causing an instant short
Brawo dobra robota a możesz podać model zgrzewarki i jakie ogniwa montujesz
Wystarczy zobaczyć opis pod filmem.
@@mirekdudka9071 a gdyby tak kupić 2 baterie 2000 mah i skleić taśmą od strony dupy?Byłaby bateria 4000 mah tylko grubsza. W lidlu kosztuje 65 zł. Bardziej się opłaca.
Is it worth that amount? Is it better to buy a second battery.
It's actually a downgrade as the lg brown cells can only output 15A constant...
Not 20-35A ?
What is the cost of such a conversion versus a new battery?
Plus, if you buy a second battery, you already have two.
2A battery sometimes is not enough to power a circular saw for example you will need 3 or 4A, the 2A battery cost around €17 the 4A battery is €30.
2Ah goes for 15 euros, 4Ah for 22-26€ on average.
Pas mal du tout, bravo
3000 replace 2000 without iny chamge in charge circut ??? secomd thing im my battery pack i found wire from one battery to main board all in serious but this wire from the joint of two battery why???
Hello, amazing video, do you know any shops that supply battery cells in Europe?
Ebay, Amazon and vape shop
18650 is the battery's name
شئ عجيب وشكرا جميلا
He replaced quality samsung cells with precarious Chinese. I don't think it's a smart thing to do.
You have wright, i use this litokala cells, they ar very poor on high amp discharge, then i replace with Samsung INR 18650 25 R. That is a very good cell for high discarge current.
You can not judge a cells performance without proper measurements.
The LiitoKala HG2 cells are actual real LG cells (chemically), they are just lower in grade, "C" or "B" for example.
While an A grade HG2 cell has in internal resistance of 19-22 mOhm (load method, not AC sine wave measurements), the "C" grade HG2 cells are typically 28-34 mOhm, which results only in a + ~2 degree Celsius difference on average under load.
I thing originál bateriss hawe biger discharge curent.
There is no option that they even have more than 30A.
definately not, original is rated for 10-15A and this is rated for 30A, in every way superior
Nice but where we get batter joiner system
hello sir this is the question, how to make your spot welder?
I think you can buy it link in the description
Its low curent cell... Dosnt fit to electro tools.
Bravo like
Boys all the devices used are there during the video.
Well done 👍👍👍
Hi,tks a lot! There are two kind of batteries of 5000mah, xt60 and t plugs, what is the correct one? Tks a lot.
I would get the XT60 since it is a more universal connector type, although it depends on your application.
Take 5000mah xt60 plugs
good video thnak you
Battery is Panansonic or LG?
Where can I buy a spot welding tool like the one you use?
Look at descriptions please
@@ARMTechHomemade thank you for completing the video information
@@kaisarkamal you will make bad welds with this kind of tool. It will be sticking not welding
anyone knows the name of the music playing?
Хорошо поучилось
But how can I get tools for that? Name and link please! thanks!