Thanks guys! This video is fantastic! I wrote a short version of the steps on paper and used it to remove and replace the 2 HP motor. If you are hesitating or unsure of being able to do this, review the video 2 - 3 times and get comfortable with the steps. You will save money. I estimated 2 hours and it was just under that. Removing the old motor was fast and disassembling (less than 25 minutes). However, I ran into the wire stripping rework and paced myself to ensure my son and I got it right. I suggest stripping the electrical wires to expose new copper. It made it a lot easier to tighten and secure screws. Many thanks for the video!!!!
My pool guy suggested I replace the motor on my own. This video was so comprehensive and easy to understand that I took the challenge. Thank you for this.
I know this is a video that has been up for awhile. I was left babysitting my sister's pool for the summer, so of course, the pump had to break down on my watch. This video , along with your trouble shooting videos have been a great help. My brother-in-law in Florida and INYO pools videos and I have been on "conference calls". Great Instructions Thanks so much
Ok so now I know how to replace and rewire a pool pump motor. Item # 600 on the list of things I never thought I would need to know when I bought a house. Perfect video.
I had a 1.5 HP pump replaced by a local pool guy with another 1.5 HP pump and it kept overheating. He blamed my plumbing and I didn’t know enough to challenge him on it since this was my first pool. Thanks to you guys, I figured out that my old pump was actually 1.9 “total” HP (because of the 1.3 Service Factor), and now with this video, I replaced my motor myself and I can’t tell you how thrilled I am with it. Thank you!!!
Hi to all at INYO. Thanks for a great video, easy to follow and very informative. Changed my pool motor with no hassle. THANK YOU all again.Happy and cool in Spain.
This was perfect for me when I got to the part about getting the impeller off the shaft - saved me time figuring that out for myself. Excellent video., thanks.
Opened up my pool this year and the motor was dead. The earliest anyone could come out to replace it was 7 to 10 days. All I could think of was 10 days of hot, humid weather and what my pool would look like without any circulation. Thanks to your video I replaced the motor myself the next day!
A lot of questions about capacitors: Shorting out the capacitor is done by placing a load across the terminals/wires of the capacitor. Usually this is done using a screwdriver for an instant discharge. However, for any large capacitor that has a DC voltage applied, the charge could be quite big and it will blow a large chunk of molten metal out of your screwdriver. It can be dangerous. Luckily these motors are AC. AC motors usually have at least a starting capacitor, but may have a run capacitor as well. There shouldn't be any charge on an AC motor capacitor because it flips polarity every cycle, so you shouldn't get any sparking or it will be very minimal. The capacitor is there to reduce the inductive reactance of the motor windings while the AC motor is starting or running. This allows the voltage and current to be closer to being in phase with each other so that all magnetic fields are properly aligned and there are no dead spots in the motor. This reduces the current requirement of the motor and makes it run much smoother and cooler.
Thanks INYo Pools, you saved us a lot of money watching this video. Our new energy efficient motor is so very quite! Also had the best price on it and the free shipping really helped too. Again Thank You!!
Nope that wasn't the problem. The shaft seal on the spring on the backside of the impeller had a chunk missing out of it, Brand new out of the box. The replacement one came in damaged too. The third time was a charm as it was intact. Put everything back together and it works like a charm. The "V" missing piece from that seal looked like that's the was they made it. With out a good picture of it we didn't know it wasn't suppose to be like that. Done, Fixed. Thanks for the suggestion
A good thing to add as a final check before replacing the lid at the back of the motor is to be sure that no wires (motor capacitor wire most likely) are anywhere near the motor shaft. I had a motor capacitor wire that slipped out from under the capacitor when replacing it and rubbed against the motor shaft until it shorted out. I've never had that happen before but it's easy to watch out for.
I'm in the process of replacing an old and rusty Century pool pump motor which I inherited with the house I purchased recently. Upon disassembling the pump housing which is a Sta Rite unit, I noticed that the impeller did not have a plastic ring around it as shown in your video. Is this normal, as I ordered a bunch of replacement parts on Amazon for my rebuild, but cannot find a ring for the Pentair C105-236P type impeller.
Can you use most motors on a hayward Pool system, from other pump companies? I have a Super II pump and wanted to install a AO Smith 1.5Hp 2 speed pump motor.
Just watched your video.. This is exactly what I am trying to do. >Thanks for the detailed instructions. Only one thing which I could not follow. I am replacing shaft seal 37400-0027. I wanted to know the orientation of the second part of the shaft seal. Does the metal side of the second part face the white ceramic seal or does the rubber side face the white ceramic seal while loading it on the impeller. Please respond. Thanks.
For most pumps, the white ceramic piece is on the side closest to the motor and the spring loaded side is setting on the impeller. The orientation of the shaft seal is dependant upon your pump model. For example, the Hayward Super Pump shaft seal is installed the way I mention above, but the Pentair WhisperFlo is the opposite. What is the model number of your pump?
Do all pool pump motor shafts have a bolt/screw in the middle front for the impeller? I noticed a few vids on here that didn't show any when doing a motor swap.
Impeller lock screws used to be the norm, but most new pump designs have eliminated them in favor of the threaded impeller. They can still be found on pump designs like the Pentair Challenger and WhisperFlo, but they aren't "vital" to securing the impeller. They are more of a redundancy nowadays.
@@Inyopools thank you for the reply. I was worried that I forgot a step, kept thinking I know there was no screw there, but then watched a few vides and said oh no did i forget to do that? haha
Thank you for the kind words, we're glad to help. If you come across pool issue that is not covered by one of our videos, feel free to give us a call at 1-877-372-6038
I have a Marathon Electric 1.5 hp motor but I can't seem to be able to get the impellor off. It turns clock wise or counter clock wise it doesn't seem to have any way to loosen it.
If my power has been shut off for 3 days is it safe to handle? I am scared of that capacitor thing! Everything else I think I can handle. I would turn off all of the circuit breakers FIRST. I am trying to figure out what motor to order. I think I have a one speed ONE HORSE POWER HAYWARD. Its about 9 years old and the outer markings are worn out. I found on ebay replacements. Does it have to be HAYWARD? also what about the correct voltage? How am I to know> maybe i should hire you to do it! ALL extra advice is greatly appreciated.
Just replaced my motor, easy once I had the right tools (needed larger channel locks for impeller). However, mine did not have a bonding wire, is that an older technology?
Hi Tom, attaching the bonding wire is an extremely important step to provide protection from electrical shock in the event of electrical insulation failure. It is usually required by your local electrical code for all metal objects around your pool to be bonded. If you are having trouble finding the bonding lug on your new motor we would suggest having a licensed electrician help you out.
@@Inyopools Thanks, I can find the lug, there just isn't a bonding wire to connect to it. I had the old pump/motor installed by a local pool company when we put in a new heater 10 years or so ago and it's never had one. What does the bonding wire connect to external to the motor?
a new shaft seal is a must! never reuse shaft seals, this pump takes a 201 shaft seal ,and if removing the capacitor remember to tuck away the wires under the capacitor,when you put it back in place "prime the pump and watch for the wet spot" Jay Florida
You'd want to use a silicone or teflon lubricant on the o-rings & gaskets. Magic Lube makes a good product. You don't need to lubricate the shaft seal. You can wet the rubber part with some water to help it slide into place.
Thanks for all the positive comments. I am glad to hear this how to guide is helping out so many people. If you guys need any help replacing a pool pump motor please feel free to call us at 1-877-372-6038.
You could always just wait 15-30 min for the capacitor to discharge. ALWAYS replace the main seal (shaft seal) when you replace the motor. That $15 seal will save your new $200 motor.
I'm trying to replace a Marathon. Is there a reason why it won't just unbolt from the pool pump housing? I unbolted the 4 bolts but it will not separate. Are they designed differently or is there a trick to getting them off?
There may be a clamp or nut assembly that secures the back half of the pump to the front. What is the make and model of the pump side (not the Marathon motor)?
@@jonro3739 The link below will take you to a schematic for the Pentair Superflo. Once you remove the Key 12 bolts, the motor assembly should slide back. Removing the key 19 bolts will not help separate the motor assembly from the front housing. If it is not sliding back easily, try opening the air relief gauge on the filter or removing the pump lid. That will release pressure that may be making it difficult to slide the motor assembly back. www.inyopools.com/pool_parts_pentair_superflo.aspx?Keywords=superflo+parts
10 min. The point is not how fast he/she can do it, but how well. You pay for experience not time. I can do it in 10min with my eyes closed (including shaft seal this video left out) but new guys may take an hour. There is no difference in the 2 as long as every necessary step is performed properly.
It shows that it’s a 230V and you can change the voltage on the display. But how can I plug it in if it only has a neutral and hot wire? Any help would help out greatly. Thanks
With this video being made 11 years ago, is it still recomended to short the capacitor? I asked a couple of my electrician friends and they said don't do it.
+serdgeedgerunner bleed resistors are not overly common in pool set-ups. Even if you do have one, I would attempt to discharge the capacitor for good measure. When electrocution is a possibility I will always take extra safety precautions.
You know, putting those bonding wires under the lug like that is a code violation. In an instance where you have two separate wires you need to attach them to one another using a split bolt connector and THEN put on of the leads into that bonding lug. A contiguous wire is also ok if you use an open style lug but what you did here is a big no-no and as an inspector I would fail that pool.
@coydog121 next time look for your local pool pump repair guy, cost to repair your pump motor w/ a free shaft seal $75.00 and a 101 on how to make your pump last longer PRICELESS
A SHORTED MOTOR IS WHY capacitor can pack a punch that you will not soon forget ! They can blow up in your face ! I have rebuilt thousands of motors, and capacitors scare me ! so maybe the 6th motor you do will be the one that blows up in your face and pokes your eye out.. no worry's you'll grow a new one .. prime that pump ! and watch for the wet spot ! Jay the pool pump repair guy in longwood Florida 32750
+Macario Aguilar The capacitor may discharge and shock you. You should be able to discharge the capacitor as we show in the video. It may not always spark.
Thanks, everything was great - except my Haywood Super Pump doesn't have an impeller ring and was later confirmed by my local pool store, after I'd bought one for a 1 hp pump and found it didn't fit. Still, excellent video - pump started right up properly....
Thanks, Rick. Because the impeller ring is included in some pump designs, it was a must have step in the video but glad you were able to figure out the problem. If you ever have an issue feel free to call Inyo at 877-372-6038.
Hello Astrid, the correct motor replacement is the UST1152 1.5 HP replacement motor. The C48L2N134B1 is one of its (many) alternative part numbers. UST1152 Product Link: www.inyopools.com/Products/00200017001332.htm
Inyo Pools, thanks for the reply, I was able to muscle it off eventually, the seals were dry as a bone. Pool and pump are back up and running. Again, thank you.
Hi there. I've been trying to find a good video for a while and this is a quality video. Thanks for taking the time to take the mystery out of this job. While I can't find the right pump on your website at the moment (SP1607Z1M) I will be calling you guys tomorrow. Thanks again!
And because you have a Hayward Super Pump, I suggest getting either a standard tune up kit (GOKIT3: www.inyopools.com/Products/00500022000632.htm) or the saltwater kit (GOKIT3SALT: www.inyopools.com/Products/00101352069707.htm) to compelte the motor installation.
+Robert Fugate Do not forget snakes. I have heard stories of snakes wrapping up in motors only to be surprised when the next pump cycle comes around. That cannot be a fun clean-up.
get a new gasket, yours is damaged from chlorine. never place tablets in the skimmer basket and tie the floater off- and only use as many tabs in the feeder that is consumes in a week.- make sure your chemicals are balanced ! prime that pump and watch for the wet spot ! Jay the pool pump repair guy in longwood Florida 32750
If you have to ask about shorting a capacitor, then you should at the very minimum have someone there with electrical training so you don't hurt yourself.
Showed bolting things on but no real instructions. Bummer. Just ordered $1200.00 worth of goods from you all. Ill keep looking for vids. Hopefully you have another.
Inyo Pools I did. Problem turned out to be that mines had a reversed thread impeller screw. I didn't know it was reversed threaded until i snapped the screw. Now im just waiting on my replacement screw... Thanks. This vid allowed me to just go for it..👍👍
Thanks guys! This video is fantastic! I wrote a short version of the steps on paper and used it to remove and replace the 2 HP motor.
If you are hesitating or unsure of being able to do this, review the video 2 - 3 times and get comfortable with the steps. You will save money.
I estimated 2 hours and it was just under that. Removing the old motor was fast and disassembling (less than 25 minutes). However, I ran into the wire stripping rework and paced myself to ensure my son and I got it right.
I suggest stripping the electrical wires to expose new copper. It made it a lot easier to tighten and secure screws.
Many thanks for the video!!!!
My pool guy suggested I replace the motor on my own. This video was so comprehensive and easy to understand that I took the challenge. Thank you for this.
I know this is a video that has been up for awhile. I was left babysitting my sister's pool for the summer, so of course, the pump had to break down on my watch. This video , along with your trouble shooting videos have been a great help. My brother-in-law in Florida and INYO pools videos and I have been on "conference calls". Great Instructions Thanks so much
Ok so now I know how to replace and rewire a pool pump motor. Item # 600 on the list of things I never thought I would need to know when I bought a house. Perfect video.
Thank you for such clear and concise and easy to understand instructions for this somewhat complicated procedure.
You are welcome!
I had a 1.5 HP pump replaced by a local pool guy with another 1.5 HP pump and it kept overheating. He blamed my plumbing and I didn’t know enough to challenge him on it since this was my first pool. Thanks to you guys, I figured out that my old pump was actually 1.9 “total” HP (because of the 1.3 Service Factor), and now with this video, I replaced my motor myself and I can’t tell you how thrilled I am with it. Thank you!!!
That's Awesome! Glad we could help.
Perfect video for a first timer. Super easy and a great step by step. Thank you for putting this together.
Glad it was helpful!
Hi to all at INYO. Thanks for a great video, easy to follow and very informative. Changed my pool motor with no hassle. THANK YOU all again.Happy and cool in Spain.
Fantastic, glad to help!
This was perfect for me when I got to the part about getting the impeller off the shaft - saved me time figuring that out for myself. Excellent video., thanks.
Opened up my pool this year and the motor was dead. The earliest anyone could come out to replace it was 7 to 10 days. All I could think of was 10 days of hot, humid weather and what my pool would look like without any circulation. Thanks to your video I replaced the motor myself the next day!
Good Job E-Rock. Glad we could help out.
A lot of questions about capacitors:
Shorting out the capacitor is done by placing a load across the terminals/wires of the capacitor. Usually this is done using a screwdriver for an instant discharge. However, for any large capacitor that has a DC voltage applied, the charge could be quite big and it will blow a large chunk of molten metal out of your screwdriver. It can be dangerous. Luckily these motors are AC.
AC motors usually have at least a starting capacitor, but may have a run capacitor as well. There shouldn't be any charge on an AC motor capacitor because it flips polarity every cycle, so you shouldn't get any sparking or it will be very minimal. The capacitor is there to reduce the inductive reactance of the motor windings while the AC motor is starting or running. This allows the voltage and current to be closer to being in phase with each other so that all magnetic fields are properly aligned and there are no dead spots in the motor. This reduces the current requirement of the motor and makes it run much smoother and cooler.
You guys are so awesome - thanks. I am tiered of paying through the nose for what amounts to be swapping out an innertube on my kids bicycle.
Thanks, Rebecca. Saved money is the best kind of money!
Great video. You guys saved me at least $100. Put in my new pump yesterday and it's working like magic.
Awesome! Saved money is the best kind of money.
Thanks INYo Pools, you saved us a lot of money watching this video. Our new energy efficient motor is so very quite! Also had the best price on it and the free shipping really helped too. Again Thank You!!
Thank you. Informative video. Successfully installed my pump.
Glad to help. Thank you for watching.
Thanks for taking the time make this video. It helped me out tremendously.
New seals and gaskets are a good idea when doing a job like so. Great video tho!
This will help a great deal. Thanks
This is the one! So helpful!
Thanks for the video! It covered everything I needed to get this done.
+Marc Wynn Thank you!
Nope that wasn't the problem. The shaft seal on the spring on the backside of the impeller had a chunk missing out of it, Brand new out of the box. The replacement one came in damaged too. The third time was a charm as it was intact. Put everything back together and it works like a charm. The "V" missing piece from that seal looked like that's the was they made it. With out a good picture of it we didn't know it wasn't suppose to be like that. Done, Fixed. Thanks for the suggestion
You don’t need to unscrew the capacitor, you can slide the 7/16 wrench from the top.
You are correct.
Thank you very informative and clear
A good thing to add as a final check before replacing the lid at the back of the motor is to be sure that no wires (motor capacitor wire most likely) are anywhere near the motor shaft. I had a motor capacitor wire that slipped out from under the capacitor when replacing it and rubbed against the motor shaft until it shorted out. I've never had that happen before but it's easy to watch out for.
Great Video, Thank you. Just replaced my motor and everything is working great!
Awesome! - MGS
I'm in the process of replacing an old and rusty Century pool pump motor which I inherited with the house I purchased recently. Upon disassembling the pump housing which is a Sta Rite unit, I noticed that the impeller did not have a plastic ring around it as shown in your video. Is this normal, as I ordered a bunch of replacement parts on Amazon for my rebuild, but cannot find a ring for the Pentair C105-236P type impeller.
Very good how to video
Well done video! Thanks very much!
Can you use most motors on a hayward Pool system, from other pump companies? I have a Super II pump and wanted to install a AO Smith 1.5Hp 2 speed pump motor.
11
Just watched your video.. This is exactly what I am trying to do. >Thanks for the detailed instructions. Only one thing which I could not follow. I am replacing shaft seal 37400-0027. I wanted to know the orientation of the second part of the shaft seal. Does the metal side of the second part face the white ceramic seal or does the rubber side face the white ceramic seal while loading it on the impeller. Please respond. Thanks.
For most pumps, the white ceramic piece is on the side closest to the motor and the spring loaded side is setting on the impeller. The orientation of the shaft seal is dependant upon your pump model. For example, the Hayward Super Pump shaft seal is installed the way I mention above, but the Pentair WhisperFlo is the opposite. What is the model number of your pump?
Well done helpful video Thanks
Excellent video and very helpful. Your video was for me easy to follow and understand thank you.
good tutorial. Congratulations
Thanks a bunch. I had a marathon pump but basically the same
Thanks for watching!
Do all pool pump motor shafts have a bolt/screw in the middle front for the impeller? I noticed a few vids on here that didn't show any when doing a motor swap.
Impeller lock screws used to be the norm, but most new pump designs have eliminated them in favor of the threaded impeller. They can still be found on pump designs like the Pentair Challenger and WhisperFlo, but they aren't "vital" to securing the impeller. They are more of a redundancy nowadays.
@@Inyopools thank you for the reply. I was worried that I forgot a step, kept thinking I know there was no screw there, but then watched a few vides and said oh no did i forget to do that? haha
This helped me out alot! Thanks!!
Thank you for the kind words, we're glad to help. If you come across pool issue that is not covered by one of our videos, feel free to give us a call at 1-877-372-6038
Did you replace the seal? Pointless to replace motor and use old seal on new motor
I have a Marathon Electric 1.5 hp motor but I can't seem to be able to get the impellor off. It turns clock wise or counter clock wise it doesn't seem to have any way to loosen it.
Just installed ours before seeing your video. Our pump is running great but is extremely hot to touch. Is this normal or is something wrong?
Brett, check out our video about hot motors: th-cam.com/video/DCTedKJYp2Y/w-d-xo.html&t
If my power has been shut off for 3 days is it safe to handle? I am scared of that capacitor thing! Everything else I think I can handle. I would turn off all of the circuit breakers FIRST. I am trying to figure out what motor to order. I think I have a one speed ONE HORSE POWER HAYWARD. Its about 9 years old and the outer markings are worn out. I found on ebay replacements. Does it have to be HAYWARD? also what about the correct voltage? How am I to know> maybe i should hire you to do it! ALL extra advice is greatly appreciated.
Just replaced my motor, easy once I had the right tools (needed larger channel locks for impeller). However, mine did not have a bonding wire, is that an older technology?
Hi Tom, attaching the bonding wire is an extremely important step to provide protection from electrical shock in the event of electrical insulation failure. It is usually required by your local electrical code for all metal objects around your pool to be bonded. If you are having trouble finding the bonding lug on your new motor we would suggest having a licensed electrician help you out.
@@Inyopools Thanks, I can find the lug, there just isn't a bonding wire to connect to it. I had the old pump/motor installed by a local pool company when we put in a new heater 10 years or so ago and it's never had one. What does the bonding wire connect to external to the motor?
a new shaft seal is a must! never reuse shaft seals, this pump takes a 201 shaft seal ,and if removing the capacitor remember to tuck away the wires under the capacitor,when you put it back in place "prime the pump and watch for the wet spot" Jay Florida
What kind of grease do I buy to replace the seals kit? Thank You Antoinette
You'd want to use a silicone or teflon lubricant on the o-rings & gaskets. Magic Lube makes a good product. You don't need to lubricate the shaft seal. You can wet the rubber part with some water to help it slide into place.
@@Inyopools
My DuraGlas PUMP owner's manual says to use a SMALL amount of liquid dish detergent for the shaft seal. Is water good enough?
Thanks for all the positive comments. I am glad to hear this how to guide is helping out so many people. If you guys need any help replacing a pool pump motor please feel free to call us at 1-877-372-6038.
You could always just wait 15-30 min for the capacitor to discharge.
ALWAYS replace the main seal (shaft seal) when you replace the motor.
That $15 seal will save your new $200 motor.
What kind of grease do I buy to replace the seals kit? Thank You Antoinette
What was the frame size of that motor you were working on on the video
We were working on a Hayward Super II, so that is a 56J Frame motor.
- MGS
I'm trying to replace a Marathon. Is there a reason why it won't just unbolt from the pool pump housing? I unbolted the 4 bolts but it will not separate. Are they designed differently or is there a trick to getting them off?
There may be a clamp or nut assembly that secures the back half of the pump to the front. What is the make and model of the pump side (not the Marathon motor)?
@@Inyopools I’ll have to take a look. Do you think I should remove the bolts to the motor mounting plate to get it free?
@@Inyopools it’s a pentair superflo 350097
@@jonro3739 The link below will take you to a schematic for the Pentair Superflo. Once you remove the Key 12 bolts, the motor assembly should slide back. Removing the key 19 bolts will not help separate the motor assembly from the front housing. If it is not sliding back easily, try opening the air relief gauge on the filter or removing the pump lid. That will release pressure that may be making it difficult to slide the motor assembly back. www.inyopools.com/pool_parts_pentair_superflo.aspx?Keywords=superflo+parts
How long does it take for a professional to replace a pool pump motor, centurion, 2hp?
10 min. The point is not how fast he/she can do it, but how well. You pay for experience not time. I can do it in 10min with my eyes closed (including shaft seal this video left out) but new guys may take an hour. There is no difference in the 2 as long as every necessary step is performed properly.
My power wires are 1L, 2L and ground cables but my motor is 1 hot, 1 neutral and 1 ground line. Motor says it’s a 230V. How do I connect it?
1 hot, 1 neutral, and 1 ground is 115v. What is the catalog or part number of your motor?
@@Inyopools model number PCP10001-VSP
It shows that it’s a 230V and you can change the voltage on the display. But how can I plug it in if it only has a neutral and hot wire? Any help would help out greatly. Thanks
AlmontCowork - We are happy that you will be able to finish your pump motor replacement this weekend.
Thank You
INYOpools
1-877-372-6038
nobody seems to mention the diffuser gasket in these DIY videos' Mine keeps sliding back during the reassemble
thank you so much this was very helpful am just pissed because my pool pump went bad and i had to spend 300.00 for a new one
how do you short the capacitors? the pump has not been running for two weeks
i just use a screw driver and short the terminals..dahh
You got it.
En Español por Favor
Desearía que mi español fuera lo suficientemente bueno para eso.
With this video being made 11 years ago, is it still recomended to short the capacitor? I asked a couple of my electrician friends and they said don't do it.
If the capacitor is still good, it will hold a charge and could potentially zap you. We recommend discharging it, just to be on the safe side.
Would've appreciated seeing how to short out the capacitor.
Hold a screwdriver by the insulated handle, and touch the metal blade to both terminals of the cap at the same time.
it sounds dangerous
@@aboveall0006 as long as you're holding onto the insulated handle of the screwdriver, there's no danger.
It will discharge capacitor in 15 min if it have "bleed resistor" on it. If not, then you need to use screwdriver or resistor (not sure how many Ohm)
+serdgeedgerunner bleed resistors are not overly common in pool set-ups. Even if you do have one, I would attempt to discharge the capacitor for good measure. When electrocution is a possibility I will always take extra safety precautions.
Inyo Pools Yesterday I did it, and was no spark, I guess I have it :)
You know, putting those bonding wires under the lug like that is a code violation. In an instance where you have two separate wires you need to attach them to one another using a split bolt connector and THEN put on of the leads into that bonding lug. A contiguous wire is also ok if you use an open style lug but what you did here is a big no-no and as an inspector I would fail that pool.
@coydog121 next time look for your local pool pump repair guy, cost to repair your pump motor w/ a free shaft seal $75.00 and a 101 on how to make your pump last longer PRICELESS
A SHORTED MOTOR IS WHY capacitor can pack a punch that you will not soon forget ! They can blow up in your face ! I have rebuilt thousands of motors, and capacitors scare me ! so maybe the 6th motor you do will be the one that blows up in your face and pokes your eye out.. no worry's you'll grow a new one .. prime that pump ! and watch for the wet spot ! Jay the pool pump repair guy in longwood Florida 32750
What can or will happen if you do not defuse the capacitor?
+Macario Aguilar The capacitor may discharge and shock you. You should be able to discharge the capacitor as we show in the video. It may not always spark.
+Inyo Pools Can't this happen during the install of the new one as well?
Thanks, everything was great - except my Haywood Super Pump doesn't have an impeller ring and was later confirmed by my local pool store, after I'd bought one for a 1 hp pump and found it didn't fit. Still, excellent video - pump started right up properly....
Thanks, Rick. Because the impeller ring is included in some pump designs, it was a must have step in the video but glad you were able to figure out the problem. If you ever have an issue feel free to call Inyo at 877-372-6038.
Hi Phillip,
We are glad the video helped, if you need anything in the future let us know.
Thank You
INYOpools
1-877-372-6038
I have a Hayward super pump motor number. c48L2N134B1 I am HAVING DIFFICULTY FINDING THE SAME NUMBER CAN SOMEONE HELP ME PLEASE?
Hello Astrid, the correct motor replacement is the UST1152 1.5 HP replacement motor. The C48L2N134B1 is one of its (many) alternative part numbers. UST1152 Product Link: www.inyopools.com/Products/00200017001332.htm
What if the motor won't come out of the housing? Mine seems stuck.
Is it stuck on the main pump housing? Or is the seal plate/impeller stuck on the motor? Also what what is the model number of your pump? - MGS
Inyo Pools, thanks for the reply, I was able to muscle it off eventually, the seals were dry as a bone. Pool and pump are back up and running. Again, thank you.
Awesome - MGS
Hi there. I've been trying to find a good video for a while and this is a quality video. Thanks for taking the time to take the mystery out of this job. While I can't find the right pump on your website at the moment (SP1607Z1M) I will be calling you guys tomorrow. Thanks again!
I have a Hayward super pump
And because you have a Hayward Super Pump, I suggest getting either a standard tune up kit (GOKIT3: www.inyopools.com/Products/00500022000632.htm) or the saltwater kit (GOKIT3SALT: www.inyopools.com/Products/00101352069707.htm) to compelte the motor installation.
Thanks for the inf.
Step 1) Call pool technician
Step 2) Let him do the job
Step 3) Pay him
Motor wet jet
To help extend the life of the motor. Raise it up off the ground to keep water, grass, leaves, and insects away!
+Robert Fugate Do not forget snakes. I have heard stories of snakes wrapping up in motors only to be surprised when the next pump cycle comes around. That cannot be a fun clean-up.
Wrap the motor vents with plastic gutter leaf screen and use wire ties to hold in place.
get a new gasket, yours is damaged from chlorine. never place tablets in the skimmer basket and tie the floater off- and only use as many tabs in the feeder that is consumes in a week.- make sure your chemicals are balanced !
prime that pump and watch for the wet spot !
Jay the pool pump repair guy in longwood Florida 32750
If you have to ask about shorting a capacitor, then you should at the very minimum have someone there with electrical training so you don't hurt yourself.
That is Capacitor not compasitor
A
While a very helpful video still, a few scenes, especially starting at 2:17 are almost completely out of frame.
you kind of glossed over how to short out the capacitor. I didnt see how you did it, and i dont want to get zapped !
Hold a screwdriver by the insulated handle, and touch the metal blade to both terminals of the cap at the same time.
Too bad you skipped installing the shaft seal.
Showed bolting things on but no real instructions. Bummer. Just ordered $1200.00 worth of goods from you all. Ill keep looking for vids. Hopefully you have another.
Hello Red - Check out our video regarding the shaft seal installation. th-cam.com/video/Moy34mj_7To/w-d-xo.html
Thanks but my impeller is a bitch to get off. Been trying for 2hrs
Biron, have you tried using a strap wrench?
Inyo Pools I did. Problem turned out to be that mines had a reversed thread impeller screw. I didn't know it was reversed threaded until i snapped the screw. Now im just waiting on my replacement screw... Thanks. This vid allowed me to just go for it..👍👍
This is a pretty bad video. Half the time, what you're doing is out of frame. And you should show how to short out the capacitor.
What an ordeal.