Building a 1400hp AWD Police Car
ฝัง
- เผยแพร่เมื่อ 28 ก.พ. 2021
- We start Building a 1400hp AWD Police Car
Engine builder: www.modernmusclextreme.com/
Holly intake www.holley.com/
Instagram: / westengw
Facebook: / westengw
MB01VEZOBU8GRV1 - ยานยนต์และพาหนะ
![เก่งแต่ลับหลัง (FINSTA) - ส้ม มารี (Zom Marie) Ft. Punch 4EVE [Official Teaser]](http://i.ytimg.com/vi/Fvt0Wz1hfGY/mqdefault.jpg)
Mistakes happen and its not about the mistake its about how you take care of the mistake when it happens and Modern Muscle Extreme is sending someone out to take care of it so they deserve nothing but love.
Quite right! It also kinda helps that you got a louder than normal megaphone but still...other businesses should take notes on taking responsibility and making it right.
It'll be worth the wait, I'm sure
Awesome job on there part fixing it. But I am curious do they not dyno it or run it after its built?
Mistakes happen yes, but there is no excuse for that one!
True but you are getting TH-camr service not a guy that just bought it and has no national voice.
Third video of me telling Weston to make 30 minute videos again.lol
now thats a high quality engine builder......
That's outstanding attention to detail 😂💀
They had one job 😜
Nah they are sending their guy fix it right so it’s not Westerned
A welder doesn’t make you a fabricator... and a torque wrench doesn’t make you an engine builder
Probably the fuckin apprentice
He handled that fubar with complete class. This is exactly why he has over a million subs.
Definitely, Westen is a Class Act!!
At this point his town starts to get worried when they don't see him for a couple of days because they know he is working on something crazy lol
😂😂😂
I only see him driving around like once a week lol
Congratulations you have been selected among the shortlisted winner's for the ongoing ps5 giveaway What'sapp the number above ^^^^^^^^^^^^👆,,,,,,,,,,,
I can not wait to see you break the diff, trans, and all cv shafts on the first hard pull!!!
My poor 06 Daytona's Rear end sounds sometimes like its got some give to it lol. I just love tapping the gas and giving it hell. Stock mind you...can't imagine it handling much more than 600 (soft launches) without blowing into 100 pieces.
Rip transfer case, rear axles, drive shafts... shit he’s probably gonna break the tie rods and steering shaft with 1400hp lol
I literally got scared when he bolted the stock transmission on. Hopefully he’s just in the test fitting stage
@@infl the whole front suspension is pretty cheap lol. Then again, heavy car 10 or more years and a v8 its gonna hurt. Gonna find bottlenecks real fast
@@baileyhatfield4273 Yeah modern cars are just junk in general... Pull the body and start from scratch 😂😂
You kicking the forklift to make it honk was the funniest thing I've ever seen 🤣
No shit😂I've had to pump one to start for forever cuz of work, with one of the two forklifts being absolute shit (the other is an awesome CAT tho). Never had one so bad that the horn needed a kickstart too😂
SAME LMFAO
"Everyone on the video: 'You're stupid for pumping a propane powered forklift.'
"It identifies as an old chevy pickup, you gotta pump it."
i freaking lost it when you started kicking the forklift and it only honked when you kicked, Westen you are pure gold and keep up the great work :)
Jfc. I wouldn't put any trust in a shop that can't even get the heads on the right sides.
Or, when you order engine from WISH.
They are great guys and a great shop.
@CHARLES HANSEN I wonder if they'd do that for just anybody though...
The problem starts when the make excuses then stop communicating with you leaving you holding the bag. If these guys actually follow through then there is no problem mistakes get made everywhere some people are just better at covering them up.
Yeah, company owner probably read to strangle someone
Who wants to bet on the quality of the rest of the engine build
Exactly.. at the very least--- re-torque all the crank and rod bolts.. That would be a MUST in my book. the rest is all coming apart anyway.
You torque the head bolts in a zig zag pattern right from the left to right....🤦🏻♂️😂
@@MrZimmaframe Nope.. center and spiral outward. iron it out
@@calholli Bro it was a joke..
@@MrZimmaframe I know. Mine wasn't though.
Your way of handling that situation is just stellar! It happened and by being pleasant with them gets you a company rep in person to correct it.
Way to go!
The company is taking care of their problem. Awesome. Always love the vids. They make my day.
Man those 10mins went by too fast you’re gonna need to start making 1 hour long videos 😂
Agreed. Need more content each time. Maybe slow things down a bit, show more details. The forklift horn scene was just a waste
At least 20 to 30 min videos
@@gregorygarland3064 I laughed at that forklift scene heh, but I agree it could be longer. But it is what it is. We need to wait another week.
Congratulations you have been selected among the shortlisted winner's for the ongoing ps5 giveaway What'sapp the number above ^^^^^^^^^^^^👆…………..
ooof, when a rather popular tuber tosses that business name out there. Im sorry, you just cannot make that mistake on a $25k motor without double checking.
Would hate to be whoever's in charge of quality control.
Christopher McCarthy, you're absolutely correct. Must've been done on a Fast Friday or Mournful Monday. No excuse in my book!
To be fair, they knew who they were sending it too and probably should have made sure it was assembled properly before sending it to a TH-camr with over 1 million subscribers. I'd like to believe they would send someone to our house if this happened, but I have suspicions that would not happen.
@Zutronic com how did you get from quality control didn’t do his job properly to how that particular state controls drugs ?
@Zutronic com He is fried on pain killers.He trashed his back and talked about the Dr. ...Lol,Sober?Let me tell you about the FACTS.The medicinal uses for weed and a bunch of other herbs,spices ,and minerals far outweighs the poison that big pharma puts out there to mimic all of the natural stuff and also to make sure that not many ppl live to see 80 or 100.We should be living way longer.You are an idiot.Keep thinking that the government has your best interest at heart!The powers that be.The ones truly in charge don't want you to know any of this,so they brainwash society into thinking just like you.I mean after all,you only think that way bc someone once told you that pot is bad......Go chase down the crack dealers..Oh wait!..Most the coke is allowed in bc of the government anyway.How can you automatically assume that someone was drunk or high on ANYTHING?As a shop owner,I can say that mistakes like these ARE easy to make.Yes double and triple checking helps but, stuff happens.Get off of TH-cam and go learn facts before you speak next time!Lame.
Just come cross this channel 2 days ago and now can’t stop watching all your videos keep up all amazing videos 🙂
Love your videos, been watching for over a year, seen every video, and you young man a crushing it with this content!!!! Great range of content for everyone. Thanks Westen. I’m gonna have to get some merch.
*Two directions this build can take*
1. Offroad suspension and rally setup
2. AWD beadlock drag car
I surely hope you get good comps from the engine supplier. that's a fairly large screwup on their part for sure, cant believe they are making you wait a week .
I know most engine builders just like...send them out. But like.
Good to see you again buddy good luck with the. Dodge take care keep warm an safe see you soon
Love the channel Weston! Things happen, we are all only human. What matters is the customer service and the plan of action to remedy the problem. Sounds like they got it handled.
"It identifies as an old chevy pickup"
How about you, an Edsel?
Little Yugo: "I identify as a Bentley Mulsanne and defy you to prove me wrong!"
I have a Nissan propane forklift that identifies as a Toyota diesel forklift , we’ve had many late discussions about the consequences of going down that road , that such a lifestyle choice won’t go well for them. But, they are committed and we’re born with these feelings, and the desire to cackle with the big boys outside.... We are currently suing our local LP gas company for refusing to fill their tank up with diesel fuel and calling us crazy. I tried to tell them how badly this will play out for them on Twitter....
Google
🦁🐕
I so want a forklift. Everyone in Kansas has one.
TAKE ONE FROM JOHN ROSS
Where you live i have one for sale in Great Bend That Needs To Go ASAP
Lol, I don’t have one..
keep an eye on craigslist and offer up. I just got an old indoor walk behind one for 500 bucks, came with a 50 amp charger and new batteries too.
Buy a broken one with a good market for parts
Hell I’d flight out just to help put it together! Man all the builds you have are crazy. I love it
Damn I'm 3xcited to see this build weston let's get it
Westen:"Sure let's put a 1400 Hemi in the cop car"
Also Westen:"I think we ran into a problem installing the hemi"
Also Westen:"This forklift starts nice"
The forklift:"NA YOU NEED TO GIVE IT GAS"
ბინის
Hector
💖💥
💓😡
Saw a notification for westen and clicked immediately, this is going to be a great 10 minutes.
Oh my, thanks for 100 folks! First comment with 100.
Ikr peace at last
Damn right
Obviously
A week between videos only for a 10 minute vlog of 80% off-topic playtime
That’s why she said!
That is Customer Service right there!! Good Job Modern Muscle Extreme on making it right!
Wes your channel has come on so much, your channel for content is one of the best on youtube,
Keep it up, we are loving your vids👍
They put the heads on backwards. They messed up something as simple as putting the heads on. The tech is coming to pick up the engine, and deliver your refund in person, right?
I'd be asking for my refund in cash. If im paying $6k+ for a crate engine I'd expect that thing to be perfect. Find another shop to build you a 6.4 or just order a Hellcat.
For sure huh.. They should at least bring a brand new, fully built engine and take this one back to their shop and deal with the issues on their own time.
For sure huh.. They should at least bring a brand new, fully built engine and take this one back to their shop and deal with the issues on their own time.
I would not trust that company. Shows lack of inspections, quality, and leadership. Hell no!
There coming to fix the mistake whats so bad you never made a mistake it was probably a long day at the shop after putting 6 other engines together God forbid they make a simple mistakes especially when they offer to fix it no charge as it should be
Props to the shop, I somehow doubt they will fly a guy out to fix my engine if I buy one, but at least we know they are smart enough to know if there was ever an engine not to fuck up, this was it.
It must be nice to be able to tell a shop “ah geez we’re filming this for a million subscriber web series on TH-cam, maybe you’d rather I just didn’t mention your name ?”
დრ
I say shipping costs would have been much more
Can’t wait man love how something happens then your like we good we got this 👍🏻
The suspense is killing me ! You guys have killed so many builds, can't wait to see this one pan out!
You can tell he’s a little upset about the situation, could’ve easily been avoided
"Oh no my drink..... Oh no my other drink!" Hahaha
That why you need to install (duo) cup holders ;-)
That's why half of the midwest is heavy.
Thats a unit right there your definitely gonna be ready for cletus and cars
All i can say my big friend you are truly completely nuts in the stuff you do but you have alot of fun its cool love it
You would think the people who built the engine. Would check things over before they send it out. If they made the mistake of putting the heads on the wrong sides of the engine. Who knows what else could be wrong. I would go through the whole thing down to the crank.
100%
yup... QA was not done. Everything done should be have been QA'ed and shown on a spec sheet.
Congratulations you have been selected among the shortlisted winner's for the ongoing ps5 giveaway What'sapp the number above ^^^^^^^^^^^^👆……….
What happened to quality control and double checking your work this seems like a huge mess up they should be sending a replacement motor that's been run on the dyno to make sure it's 100 good to go
Way to stay calm and positive like always, certainly a frustrating situation.
This reminds me of my Roadmaster 94... almost 600 ponies pulling a boat ala former sheriffs ghost car... this project is coming alone decently my dude. Can't wait for the final result.
There’s no way they fired that engine up to make sure it runs??
no they didn't turn it over, he just primed the oil.
@@samiththemamith1587 jay is talking about the engine builders, not weston..
@@FlyinRaptorJesus 🤣😭
Wes ordered an incomplete engine, are you all slow or re-tarded?
@@TheRoadhammer379 Even short blocks of this caliber get test run and broken in. They just remove the parts you didn't pay for. This situation seems extremely lazy to me.
Huge error, somebody's gettin canned
@@iwantsexseemyvideo2548 did you just cast a spell on him?
Sadly someone might need to be lol 😂
This is quickly becoming my favorite youtube channel
At least they are coming out to fix everything! Thats cool
“this is the only time we’ll be able to see the nice stuff we paid for!” be very very very careful what you say man 😔 foreshadowing can be a bitch
10k views within 9 freaking minutes!!! You have made it my friend
Nice editing. That's a lot of goodness for 10 min! Keep them coming
The ending sucks! 1 week. Man. Just kidding. Great video. Greetings from Atlanta
Man that'll instill confidence in the build of the engine.
All I can think is the engine builders screaming "feckin' new guy!"
So that is also proof that the engine hasn’t been dynoed prior to delivery either.....🤔
My thoughts exactly.
Lmao, I was thinking that as well.
Are they supposed to run before they ship em?
@@zacksram for 20k they better
Very good point
Oh WOW Westen.... I wasn't even paying attention!! Congrats on a million subs!!
To be honest I don’t know shit about vehicles.. but I am addicted to watching your videos. Crazy how you know so much.
You should “upgrade” Oscar with a Harley motor and exhaust
Do it
I feel like I’m hanging out with my own friends in the garage when I watch your build vids. Lol
🐮🐅
მკ
‼️💢
@@iwantsexseemyvideo2263 huh?
Congratulations you have been selected among the shortlisted winner's for the ongoing ps5 giveaway What'sapp the number above ^^^^^^^^^^^^👆…………
wow first time i see a car u tuber who clean the car parts i will subbb
Your very entertaining and your editor or whoever edited this video did good job with the cuts 😎
"Oh no my drink!, Oh no my other drink!" I was dying laughing!
Wow remind me to never use them. They, I guess never bench ran that one? I would demand they take it all apart and check everything! If they could screw up putting the heads on wrong did they put the main caps on the right side up and are the pistons facing the correct direction. 🤦♂️ quality control 👌
I agree bill
They are sending someone out to take it all apart and put it back together for them.
Never using those idiots.
@@daexion he said they are coming to put the heads on correctly. I wouldn't trust any of the work. I have been a tech since I was 17, I am 45 now. That type of mistake is not a good indication there is quality work there. Hopefully I am wrong. I guess we will see how long that little monster lasts.
@@daexion I take it you did not pay attention in school just like you did not here?
Well, I tend to believe that sometimes mistakes just happen.....its how they remedy the problem that I'm interested in seeing. Look forward to next episode 👍
bet they weren't counting on you finding that out till you installed and blew it up.. but, as usual, Westen, your thorough, very thorough. love these vids.
Finishes cummins swapped mustang*
Westen: “well, what are we gunna do now?”
Also Westen: ^
i see rods an other random part numbers coming thru that nice hemi orange block.
Nice to see you doing proper videos again Westen I was getting a bit sick of seeing you mucking about,but now we’re back doing what you do very well, how are the shop plans coming along 👍🏻
Just goes to show what a good company will do when a problem has been found. Good on them for admitting to this issue. Definitely looking forward to seeing this baby roar and I'm not even a mopar fan.
Yup, mistakes happen. You mistakenly bought a motor from some idiots.
Holy smokes. I hope that is all...but chances are if they did something that boneheaded that engine probably will not run without more work or at all. Best of luck!!
They stand behind there work. Sending a guy all the way out to redo it. Nice to know that there are companies out there that still do that. Mistakes happen
that's going to be so nice when they get there and face and get it going for you guys I can't wait to see it God bless you all
3:37 this reminds me of the scene where Sam witwicki just kicks his collectors car
Send that engine back and get a refund!
he doesnt want a refund, he wants an engine. and to get an engine like that in these times may take months. not at all logical
Did you not watch the video???!
This channel is amazing. Stoked algorithm worked for once
Most shops would use an engine hoist and an engine stand. Westin is like I'll just use a forklift instead pure genius love it.
“It’s shy” that got me lmao
‼️😡♥️
This notification popped up whilst I was expertly cataloging a terd
lol
🤦🏽♂️😂😂
You sir, have won 2021 Comment Of The Year
Lol
💢😡♥️
Can't wiat for the next video🚀💨
Love the video keep up the great work
Have a feeling the swapped heads mistake might end up earning westen a sponsor....will he accept thier offer?? Tune in next week to find out!!
I feel like they owe him lost revenue on the videos he would have made of the build. He'll be a week or more behind. It's probably in the neighborhood of the price of that engine. A week is a lot of money for someone that has a million subs.
@@mckrackin5324 thats what I'm thinking too, hopefully they make it right, give him a sponsorship or a free engine or 2.
Chrysler tech for 28 years I've never seen a mistake like that.
Like cars. Understand little about the technicals of this but it’s fun to watch.
Love your videos and wanted to say it was badass to see you in Granger Smith's music video
FACT: Westen is an automotive genius.
The guys that built this engine shouldn’t build engines.
@Joe Smith he paid enough they can still afford to fly someone out to rebuild it, and likely not lose money when it's all said and done.
Moron
Congratulations you have been selected among the shortlisted winner's for the ongoing ps5 giveaway What'sapp the number above ^^^^^^^^^^^^👆………..
Good work man
Rock Chalk! Greetings from another Kansan. Keep on keeping on, man.
It’s ok, I used to put my shoes on the wrong feet too! (When I was 3!) lmao
09:30 Im not very car savvy but how does that even happen? Don’t these companies have some sort of quality control to make sure an engine is built correctly and functions?
Pretty sure most just send it out. Problem is they build so many, not exactly easy to start them all up, plus most people want BRAND new engines. It is a builder error for sure though.
Old school style. Solid axles front and back with transfer case.
Can you do a full video explaing what happened to all the past builds you finished?!? Thatd be super cool
"BUT, it starts really good"😂😂
any other youtuber this wouldve been a 10 episode series
"Me and this forklift get along just fine" flash back to 3 minutes ago when he was kicking it to honk "its shy"😂😭😭😭
Dude I love this guy!! but sadly gotta get rid of my rt🥺
Did you pick up those drink cups?!
Ooooof. They are going to get alot of hate for that.
Dang! For that kind on dough I thought you’d get better. Good catch!
I been waiting for this
Return that motor and go to a different engine builder, I’d have zero faith in that.
How many others things have they cocked up on, this is just the beginning you’ve not even put it in the car or ran power through it.
They probably lined up the ring gaps too
Just what I was thinking. They build a high hp engine and don't run it on the dyno or anything? Unless they are sponsoring this build, I'd get my money back and go with a well known reputable builder. Its basic common sense to test before shipping out to the customer.
Yep it's trash
@@addylax8287 I mean mistakes happen but surely they would run it on the dyno before sending it to the warehouse
🔥💯‼️
Put the 5.7 in an 8th gen honda accord ex-l ?? 😂😂 this is my challenge to you westen
Bad ass, a company standing behind their products. I'll do business with those guys!!
Much respect to that company. That's exactly how customer service should be