A great tuition video which explains in depth but not too complicated or indeed waffles. I have recently had valves installed on each radiator (I don't know what they are called now) but when you press the top button a light comes on that allows the radiator fully on (I think) for like half hour. Now I'm having a problem with one of them where the flow of water isn't reaching the radiator. I'm guessing from what you said it's probably sticking. We've had new wall cavity insulation (government initiative) for warmer homes as we don't have cavity walls. Apparently homes before 1920 didn't.
Roger must be one of my favourite tradesmen on TH-cam to watch! he’s got excellent presentation skills And explains things in a clear precise manner Top marks to you on this very helpful video
Thank you SO MUCH! You have just saved me a fair amount of money as I had two radiators which had stopped working after the summer. My husband died in May and I usually left this kind of thing to him, but a bit of tapping with the rubber handle of my plyers and they re both working!!
Thanks, simply tapping the pin has done the trick on one of my radiators that wasn't heating up at all. Saved me £60 excess on my boiler and heating plan!
Oh my goodness, I fixed it! Thank you so much. My water level was wrong. Now my sitting room is toasted again and it saved me lots of money right before Christmas! You're an angel.
ABSOLUTELY AMAZING! I’ve recently turned on the heating… as most have, and I had an issue where my Daughters radiator, it wasn’t heating up at all! I remember a while ago watching a video of Roger and I went back today, found this video and I followed step by step with taking off the thermostats valve, and voila… the pin was lodged ‘down’, meaning the radiator wasn’t getting any heat. I pressed down a few times to loosen it up and it’s all good now! An instant result - top gent!
Hello, 11/18, the help offerings are very good but I have to make an excuse for living cause I don't have hvacs, I don't have vents issues, I don't have 2 furnaces or zone conflicts but I have tried and true furnace galvanized pipes with 1st and 2nd floor heating difference. Most of the submissions only cover air and heating systems.
One radiator not working this morning, so looked at this video. A few minutes work removing the thermostatic rad. valve, a shot of WD40 and some gentle pressure with the side of a spanner and I now have a fully working radiator. That piece of advice earned a sub and like. Thanks.
Wife told me to ‘Google’ about our 1 x cold radiator, a quick TH-cam search and after watching this video, finding the TRV pin firmly down, and tapping all around and on top of the pin, it released. I have the pin a good squish down and up a few times, and by the time I had the TRV replaced I had a roasting hot radiator. Thank you sir kindly. Andy.
Roger, Just moved into a rather unique, albeit, 100 year old apartment in freezing old Green Bay, WI USA. Woke up freezing with a cold dead radiator. After watching your awesome video, had the old girl gurgling within seconds. Thanks, You're the Man! The pints are on me if you ever visit Green Bay....but I'd suggest visiting in July....not November! Keep up the Great Work. Gary
Thank you for the good job, I was at the verge of calling an engineer to look into my radiators issues. Having watched your video done the miracle. Thank you
Properly explained - logic in the correct order - not sure why one of the other videos on You Tube starts with closing the lockshield valve after indication that the system was previously working OK, never mind missing the number of turns for a reset. Very professional explanation.
Thanks! Been watching your videos for the last couple of months because I find the items you discuss fascinating even though I wouldn’t usually undertake any plumbing myself! Today though you saved me calling a plumber for a simple job. Removed the TRV control and got the pin working again. Bingo! Warm radiator. Thanks!!
Honestly, this video was a game changer! I've had three cold rads around my house for a while. The thermo valve pin press and tap solved this issue. Thank you so much!
@nicola simpkins Try turning off most of the radiators when the heating is on, don't turn them all off as the system needs to flow, also feel the pipes coming into the rad to see if they are warming a little bit, if they are stone cold then something is blocking the flow to that rad. Sometimes you do need to bite the bullet and just call a plumber unfortunately
Absolutely excellent. Checked the valve and sure enough it was stuck. Pressed down on it a few times as per video and 'hey-presto' it released itself. Thank you so much. Saved so much hassle and money!!
Hi Roger, Thanks for saving me an £85 call out today. Your information was spot on and fixed my cold radiator problem, the pin was the problem. Brilliant, thanks again.
Thank you so much. Just took the thermostat valve off and followed your suggestion. Tapped and hey presto. Radiator working at full capacity. I have spend the last 18 months and had four plumbers look at this radiator. Even had the thermostat valve replaced by one. I can't believe no-one thought of your suggestion. Thank you so much.
Brilliant video. Had an issue with a radiator for years and now working after following your advice. Taken a bit of time balancing other radiators but worth the really easy process.
I had to find a video which explained this - currently letting all the air out of my radiators and looking forward to being warm again. Thanks a million.
Thank you so much mate, you are a great help. I don’t trust anyone in my house any more. I’ll know I’ll do a better job and I eliminate the chances of being ripped off. It’s all about the knowledge, anyone can do anything just learn how to do it and take your time. Top fella!
Thanks! We’ve had a cold radiator in the basement for a couple of years. Didn’t occur to me to try to adjust the others to get it working ! Worked a treat - 👍
Great video, really useful. Have exactly this in a spare room. After a few minutes pressing and banging (with rubber covered pliers handles) the thermostatic value pin popped up. Thanks for the advice. Just in time for the expected cold snap.
Thanks a lot for this video. One radiator had stopped warming up altogether. Just tapping at the valve as you do in the video fixed it. It is getting hot now. Brilliant video!
Thank you so much for this video, my bedroom radiator was hot on top and cold at the bottom.... so i went and turned two other radiators down and now i can hear the water entering my radiator and it's starting to heat up the whole radiator.... cheers!
Amazing! Stone cold radiator in the living room - ruled out sludge and air and “wiggled the thing” in the third fix suggested and it’s working! *adds ‘plumber’ to CV* Thank you!
hopefully, this type of cost-intensive heating system will soon disappear. Houses should be isolated in such a way that you do not require such a piece of equipment. Formerly throughout the middle ages houses were built by people who thought "we can cut down all these crazy forests everywhere and have some big stoves in every room". Nowadays this is of course madness, crazy. So actually it should be made illegal to construct new houses that require a combustor to keep a few rooms warm during winter.
Thank you for this video. It really helped, I managed to get my sitting room radiotor heating up again without needing to call the plumber. Very helpful!
Thanks for the advice, I had a cold radiator tried pressing the valve in and out with no joy, but after watching your vid a few light knocks did the trick , Excellent advice.
Thank you thank you thank you!!! I managed to fix the problem because of your incredible video! The little thermostat pin had got stuck…a little tap on top and I can feel hot water!!! 🎉 thank you so so much for teaching me something new and saving me a call out 🙏🏻
Awesome concise explanation Roger which has helped me to confirm what I was thinking anyway, I need to reduce the flow to my central radiator to get the ones at the extremities working, thanks, great video.
I'm laughing out loud! I did the banging trick on the valve and then I felt the radiator getting warm. I can't believe it worked!!! 🤣🤣🤣 Thank you!!!! My radiator hasn't worked in about 2 years!
👍 I tried bleeding the radiators but found no trapped air. Found the problem to be the fused pin. Wiggled it as you said and good as new. Saved me a few quid. Thanks for the advise.
Thank you! just bled radiators. Still have one thats not getting hot but its the end of the run. We'll try and see if its a stuck pin on sat. If not we'll watch your video on balancing. Thumbs up here!
Just found your channel Roger as I need a few plumbing jobs fixing around the house and yes, you've guessed it I cannot find a plumber anywhere! "I'll give you a call in a couple of days" but they never do {and that was x3} So, great channel, great presentation, I know what I am doing now having watched the vlogs I have the confidence. Many thanks indeed.
This gentleman explains clearly- I like his tips - thank you sir - sadly not a handly ma but I tell my plumber who said it is all gimmick to power flush- I guess even Plumbers do not want others to improve - sad u caring world- maybe future plumbers will be more help ful when they come and charge but do not do the job..
Your plumber is right in as much as you can flush a system out with mains water by removing each radiator and hooking up a hose but a powerflush machine does it faster.
Thank you so much! Rarely TH-cam has given me exactly what I have been looking for! My radiators in garage were completely cold. Tried de-airing, tired to balance old water vent. In the end turns out it was thermostat pin that was stuck!
Always amazed at the time and generosity spent on making these videos, yet just by skipping one super important distinction, it ends up wasting tons of time multiplied by thousands of inadvertent views. Specifically: this video should have made clear it's only relevant to WATER radiators, NOT steam radiators.
@@SkillBuilder It would help nonetheless to caption as such, but that's surprising and interesting. New York City, for example, is nearly 100% steam radiators.
Good tip for the turn counting on the lockshield .. I always put a pencil mark on them to keep track of the number of turns I've even used tippex to mark it lol.. sometimes it's hard to remember stuff when your rushing around on site
Great video thanks, always wondered what the screw cap was for when you bought a TRV! Sadly none of your hints helped when l said l would look at why 3 radiators wouldn't work in a friends house. The 10mm plastic return pipe was blocked in all cases, ended up replacing all the 10mm pipe flow & returns, right back to the 22mm ring. Oh how l wish tapping the valve had worked!
I know this video is old, however it just sorted out my new rads. I never have the heating on upstairs as it's a new house and massively insulated. Today I put it on as it's snowing, guess what two rads dead. System had a flush and inhibitor put in so I know it's good. Top off the TRV and a tap, bam all good, thank you very much.
Thank you for the informative video. I have a similar issue. The radiator was hot at the top and cold at the bottom. We thought that the sludge is not letting the water through. Today we installed a new radiator however the issue still exists. Another thing I noticed is that the return pipe is not hot as the inlet pipe. Any suggestion will be appreciated!
🙇♀️Thank you for doing this video!!!! Such clear information, my mama's home is so old. I really didn't know where to start. But I will TRY my best. It's COLDDD in Chicago 01Nov2019....😔🙈
Hi hello I always watching you,,,I have a question, I try to change a radiator in the house, I have a problem of draining the water in the old radiator pipe what can I do? Thanks. ,
Thank you, really well explained I had a problem with a fully cold radiator and it turned out it was the pin that had seized. Followed your instructions and they presto, working radiator again... Thank you 😁👍
Don't miss out! Join our community ▶ skill-builder.uk/signup ◀
A great tuition video which explains in depth but not too complicated or indeed waffles. I have recently had valves installed on each radiator (I don't know what they are called now) but when you press the top button a light comes on that allows the radiator fully on (I think) for like half hour. Now I'm having a problem with one of them where the flow of water isn't reaching the radiator. I'm guessing from what you said it's probably sticking. We've had new wall cavity insulation (government initiative) for warmer homes as we don't have cavity walls. Apparently homes before 1920 didn't.
He is a good and caring plumber. Why can't we have more like him?
People like Roger are saints . Simply modern saints.
Putting this information out saves time effort stress and cash.
Many thanks
Mark
Roger must be one of my favourite tradesmen on TH-cam to watch! he’s got excellent presentation skills And explains things in a clear precise manner Top marks to you on this very helpful video
They are paying you for the experience of a lifetime!
Thank you, I'll try that on my clogged radiator valves
Thank you SO MUCH! You have just saved me a fair amount of money as I had two radiators which had stopped working after the summer. My husband died in May and I usually left this kind of thing to him, but a bit of tapping with the rubber handle of my plyers and they re both working!!
I am glad we could help. It is hard when your partner dies. If my wife goes before me I won't know how to spend money because she does it all.
Thanks, simply tapping the pin has done the trick on one of my radiators that wasn't heating up at all. Saved me £60 excess on my boiler and heating plan!
Excellent!
😅😅😮😅
Oh my goodness, I fixed it! Thank you so much. My water level was wrong. Now my sitting room is toasted again and it saved me lots of money right before Christmas! You're an angel.
ABSOLUTELY AMAZING! I’ve recently turned on the heating… as most have, and I had an issue where my Daughters radiator, it wasn’t heating up at all! I remember a while ago watching a video of Roger and I went back today, found this video and I followed step by step with taking off the thermostats valve, and voila… the pin was lodged ‘down’, meaning the radiator wasn’t getting any heat. I pressed down a few times to loosen it up and it’s all good now! An instant result - top gent!
You have just taught a 73 year lady how to bleed a radiator working a treat now thank you
Hello, 11/18, the help offerings are very good but I have to make an excuse for living cause I don't have hvacs, I don't have vents issues, I don't have 2 furnaces or zone conflicts but I have tried and true furnace galvanized pipes with 1st and 2nd floor heating difference. Most of the submissions only cover air and heating systems.
One radiator not working this morning, so looked at this video. A few minutes work removing the thermostatic rad. valve, a shot of WD40 and some gentle pressure with the side of a spanner and I now have a fully working radiator. That piece of advice earned a sub and like. Thanks.
Wife told me to ‘Google’ about our 1 x cold radiator, a quick TH-cam search and after watching this video, finding the TRV pin firmly down, and tapping all around and on top of the pin, it released.
I have the pin a good squish down and up a few times, and by the time I had the TRV replaced I had a roasting hot radiator.
Thank you sir kindly.
Andy.
Thanks! That trick with wiggling the thermostat pin and tapping it literally saved me a hundred quid today!
Roger, Just moved into a rather unique, albeit, 100 year old apartment in freezing old Green Bay, WI USA. Woke up freezing with a cold dead radiator. After watching your awesome video, had the old girl gurgling within seconds. Thanks, You're the Man! The pints are on me if you ever visit Green Bay....but I'd suggest visiting in July....not November! Keep up the Great Work. Gary
Thank you for the good job, I was at the verge of calling an engineer to look into my radiators issues. Having watched your video done the miracle. Thank you
Brilliant stuff . You just saved me €100s cause I had 4 cold rads and had no idea why. TRV was stuck on all of them . Thanks a million
Properly explained - logic in the correct order - not sure why one of the other videos on You Tube starts with closing the lockshield valve after indication that the system was previously working OK, never mind missing the number of turns for a reset. Very professional explanation.
Thanks! Been watching your videos for the last couple of months because I find the items you discuss fascinating even though I wouldn’t usually undertake any plumbing myself! Today though you saved me calling a plumber for a simple job. Removed the TRV control and got the pin working again. Bingo! Warm radiator. Thanks!!
I don’t normally comment but this actually worked for me. Defo give it a try and so pleased I found this video. Thanks pal
Honestly, this video was a game changer! I've had three cold rads around my house for a while. The thermo valve pin press and tap solved this issue. Thank you so much!
Glad it helped! So many people seem to live with cold rads for years
Thank you so much. I never knew you could take those valves off, and definitely didnt know that they could stick. Brilliant video.
This guy is to thank for getting my upstairs radiators to work again. Absolutely brilliant video. Thank you thank you thank you!
Thanks, glad we could help
Ditto! It's a bleed-fest out here after the summer. Boiler is finally staying on!
@nicola simpkins
Try turning off most of the radiators when the heating is on, don't turn them all off as the system needs to flow, also feel the pipes coming into the rad to see if they are warming a little bit, if they are stone cold then something is blocking the flow to that rad. Sometimes you do need to bite the bullet and just call a plumber unfortunately
Absolutely excellent. Checked the valve and sure enough it was stuck. Pressed down on it a few times as per video and 'hey-presto' it released itself. Thank you so much. Saved so much hassle and money!!
Hi Roger, Thanks for saving me an £85 call out today. Your information was spot on and fixed my cold radiator problem, the pin was the problem. Brilliant, thanks again.
Glad it helped
Thank you so much. Just took the thermostat valve off and followed your suggestion. Tapped and hey presto. Radiator working at full capacity. I have spend the last 18 months and had four plumbers look at this radiator. Even had the thermostat valve replaced by one. I can't believe no-one thought of your suggestion. Thank you so much.
I would like to thank you for sharing your experience, without your help no chance I would had my radiator fix by myself. Thank you Roger.
Great to hear!
Brilliant video. Had an issue with a radiator for years and now working after following your advice. Taken a bit of time balancing other radiators but worth the really easy process.
Sir, you're an absolute legend. Thank you for sharing your knowledge.
I could listen to him talk all day.
T M lol me too cool dude gotta be the accent he so into it lol
Just fixed my stuck thermostatic valve with the help of this video! Thank you 😁
I had to find a video which explained this - currently letting all the air out of my radiators and looking forward to being warm again. Thanks a million.
Would love to see an episode on balancing radiators through central heating system 👍
Thank you so much mate, you are a great help. I don’t trust anyone in my house any more. I’ll know I’ll do a better job and I eliminate the chances of being ripped off. It’s all about the knowledge, anyone can do anything just learn how to do it and take your time. Top fella!
Great advice and well presented from a plumber who knows his stuff. Thank you!
Thanks! We’ve had a cold radiator in the basement for a couple of years. Didn’t occur to me to try to adjust the others to get it working ! Worked a treat - 👍
Glad it helped!
Great video, really useful. Have exactly this in a spare room. After a few minutes pressing and banging (with rubber covered pliers handles) the thermostatic value pin popped up. Thanks for the advice. Just in time for the expected cold snap.
Thanks a lot for this video. One radiator had stopped warming up altogether. Just tapping at the valve as you do in the video fixed it. It is getting hot now. Brilliant video!
I am so glad it helped. This is not the time to be in a cold house.
Thank you so much for this video, my bedroom radiator was hot on top and cold at the bottom.... so i went and turned two other radiators down and now i can hear the water entering my radiator and it's starting to heat up the whole radiator.... cheers!
Amazing! Stone cold radiator in the living room - ruled out sludge and air and “wiggled the thing” in the third fix suggested and it’s working! *adds ‘plumber’ to CV* Thank you!
Well done Nikki. I would hate to think this is the beigining of a plumbing career. Look what it did to me.
hopefully, this type of cost-intensive heating system will soon disappear. Houses should be isolated in such a way that you do not require such a piece of equipment. Formerly throughout the middle ages houses were built by people who thought "we can cut down all these crazy forests everywhere and have some big stoves in every room". Nowadays this is of course madness, crazy. So actually it should be made illegal to construct new houses that require a combustor to keep a few rooms warm during winter.
Thank you for this video. It really helped, I managed to get my sitting room radiotor heating up again without needing to call the plumber. Very helpful!
Thank you so much for your help had a sticky valve sorted out now radiator works perfectly cheers
Glad it helped
My kitchen radiator hasn't been working for over a year and tapping it got it working again! Thanks so much!
I am glad it worked so well. You kind of kick yourself for not doing something so simple but knowing what to do is the key.
Thank you my cold radiator is now hot with as you said a few gentle taps great video easy to follow
Thankyou Sir very helpful warming my final radiator (Jammed Valve) have a very merry Christmas and thanks for the lesson.
Helped getting my 3 of 7 radiators working (stuck thermostatic valves) . Thank you !!!!
Thanks for the advice, I had a cold radiator tried pressing the valve in and out with no joy, but after watching your vid a few light knocks did the trick , Excellent advice.
Thank you thank you thank you!!! I managed to fix the problem because of your incredible video! The little thermostat pin had got stuck…a little tap on top and I can feel hot water!!! 🎉 thank you so so much for teaching me something new and saving me a call out 🙏🏻
The little tapping trick just got mine sorted! Saved me a few bob, top man.
This is perfect. Well explained and I managed to sort out the issues I was having with my radiator in a few mins!
Fantastic......... finally got the radiator in the kitchen working. Sticky valve! Thank you so much for your clear instruction.
Awesome concise explanation Roger which has helped me to confirm what I was thinking anyway, I need to reduce the flow to my central radiator to get the ones at the extremities working, thanks, great video.
very helpful and concise, direct to subject - very professional and very easy instructions to follow
I'm laughing out loud! I did the banging trick on the valve and then I felt the radiator getting warm. I can't believe it worked!!! 🤣🤣🤣 Thank you!!!! My radiator hasn't worked in about 2 years!
You can't bit a little bit of tapping in the right place
👍 I tried bleeding the radiators but found no trapped air. Found the problem to be the fused pin. Wiggled it as you said and good as new. Saved me a few quid. Thanks for the advise.
Great advice - working the thermostat pin did the trick. The radiator is working great again. Thank you very much.
Great to hear!
Brilliant, thank you. Just got my spare room rad working. Needed a little love tap.
Thank you! just bled radiators. Still have one thats not getting hot but its the end of the run. We'll try and see if its a stuck pin on sat. If not we'll watch your video on balancing. Thumbs up here!
Thank you.leaking the air out of radiator worked 100 percent.
Just found your channel Roger as I need a few plumbing jobs fixing around the house and yes, you've guessed it I cannot find a plumber anywhere! "I'll give you a call in a couple of days" but they never do {and that was x3} So, great channel, great presentation, I know what I am doing now having watched the vlogs I have the confidence. Many thanks indeed.
Thanks for this video, exercising the pins on two rad valves has worked a treat.
Thanks. Not exactly the problems I had but helped me to learn about my radiator and get it working. Good and clear explanation.
Yayyy totally worked tapping the valve. Thank you very much. You are a STAR mate!!!
Great tip about the stuck valve, got my rad working again, many thanks!
Roger is amazing, wish he could check my system
This gentleman explains clearly- I like his tips - thank you sir - sadly not a handly ma but I tell my plumber who said it is all gimmick to power flush- I guess even Plumbers do not want others to improve - sad u caring world- maybe future plumbers will be more help ful when they come and charge but do not do the job..
Your plumber is right in as much as you can flush a system out with mains water by removing each radiator and hooking up a hose but a powerflush machine does it faster.
Omg 😂 that’s probably what happened. I removed a downstairs rad to decorate and an upstairs one stopped working 😂. Thanks Roger. I’ll give that a go.
Thanks for this! You helped me fix my radiator; finally! The bit at 7:30 was the minor thing I needed. Thank you.
THANK YOU, moving the pin and knocking the pip fixed my problem :)
Glad it helped!
Thank you so much! Rarely TH-cam has given me exactly what I have been looking for! My radiators in garage were completely cold. Tried de-airing, tired to balance old water vent. In the end turns out it was thermostat pin that was stuck!
Thank's for that,all my rad's were working bar one you were right about the sticking Valve, thank's again.
Stuck Drayton Valve, advice worked for me, many thanks.
This has done the trick with the pin. Good video mate
sussed it! Go that pin released and in seconds the rad was to hot to touch. Cheers mate-Hope your still out there doing stuff like this.
Hi Andrew
Last time I checked I was still out here. I take nothing for granted.
Just diagnosed and fixed my radiator due to the valve tip in this thank you 😊
Excellent!
Thank you Gentleman, I thought I will have a freezing winter as I just moved house but fixed it with your help :)
Always amazed at the time and generosity spent on making these videos, yet just by skipping one super important distinction, it ends up wasting tons of time multiplied by thousands of inadvertent views. Specifically: this video should have made clear it's only relevant to WATER radiators, NOT steam radiators.
Hi Paul
I have never seen a steam radiator in the U.K. We just don't have them these days.
@@SkillBuilder It would help nonetheless to caption as such, but that's surprising and interesting. New York City, for example, is nearly 100% steam radiators.
Thank you. Worked great with freeing up the pin on the thermostat dial.
Ahh it was the pin in the TRV!! Thanks, Roger 👍
This helped me so much pressing the pin and started to heat up within seconds THANK YOU so much really appricated
Good tip for the turn counting on the lockshield .. I always put a pencil mark on them to keep track of the number of turns I've even used tippex to mark it lol.. sometimes it's hard to remember stuff when your rushing around on site
That's a great idea!
Managed to fix and balance my radiators because to your videos. Thank you.
Thank you so very much you just made a young lady so happy!!
You are so welcome! It doesn't happen often these days.
Great video thanks, always wondered what the screw cap was for when you bought a TRV! Sadly none of your hints helped when l said l would look at why 3 radiators wouldn't work in a friends house. The 10mm plastic return pipe was blocked in all cases, ended up replacing all the 10mm pipe flow & returns, right back to the 22mm ring. Oh how l wish tapping the valve had worked!
I know this video is old, however it just sorted out my new rads. I never have the heating on upstairs as it's a new house and massively insulated. Today I put it on as it's snowing, guess what two rads dead. System had a flush and inhibitor put in so I know it's good. Top off the TRV and a tap, bam all good, thank you very much.
This video is timeless. Whenever it gets cold the views rocket. Funny that
Thank you for the informative video. I have a similar issue. The radiator was hot at the top and cold at the bottom. We thought that the sludge is not letting the water through. Today we installed a new radiator however the issue still exists. Another thing I noticed is that the return pipe is not hot as the inlet pipe. Any suggestion will be appreciated!
Thank you so much for this video. I managed to sort my issue without needing a plumber. 👍🏽
I love how honest he is thanks 😁 x
🙇♀️Thank you for doing this video!!!! Such clear information, my mama's home is so old. I really didn't know where to start. But I will TRY my best. It's COLDDD in Chicago 01Nov2019....😔🙈
Does a power flush work on a one pipe central heating system
Really useful, thanks Roger. Looking forward to the follow up video 👍
You are brilliant - thank you. Really excellent explanation.
Another useful video, thanks.
Any tips on a radiator that makes noises, Roger? I’ve tried releasing any air out of it, but no air came out!
Hi hello I always watching you,,,I have a question, I try to change a radiator in the house, I have a problem of draining the water in the old radiator pipe what can I do? Thanks.
,
Thank you this video just helped me fix my radiator issues. Many thanks
Thank you very helpful video, I like to learn to do things around the house and watching your video is easy and simple to understand.
Thank you, really well explained
I had a problem with a fully cold radiator and it turned out it was the pin that had seized.
Followed your instructions and they presto, working radiator again...
Thank you 😁👍
Great to hear!
FANTASTIC, thanks bathroom radiator now working!!!!
Cheers, this helped me get my radiator back on!
What u did ? U turn on the key and took off the key ?
Thank you so much I have had a cold radiator for months, pressing the pin down got it working straight away.
Thanks geezer , mrs is warm now 👍top video