great operator, super smooth and consistent. only thing maybe would be to have some of those trucjs come a little closer so you're not reaching so far to dump and possibly become unstable. ideally if it's possible you're supposed to have the edge of the bed of the truck line up with the end of your boom where the stick meets it at. that's just according to the excavation handbook and I think we all know that conditions aren't always in your favor in this line of work. anyway, he's doing great and just wanted to offer a little advice that might make yours or someone elses life a little easier 😎
Saw this a few months back and it's still awesome footage, like to see blasted rock or stone being loaded and handled by the excavator, how many tons or pounds were loaded?? Keep up the good work
The operator starts emptying his bucket, almost before the truck has stopped. He holds the bucket way too high up, before dumping it, so the material slams into the bed of the trailer. The trailer and truck shakes from side to side because of this. You're supposed to fill the bucket with small stones, gravel and dirt first, and dump it sloowly into the bottom of the trailer and have that as a cushion for the next loads, to prevent damage on the trailers bed, kill some of the noise, and prevent extreme wear and tear on the equipment, and also to make sure that the truck driver doesn't suffer any damages, because of this. Let's say he has his coffee cup in his hands, and this amateur dumps the bucket so high that the driver spills his coffee and gets burned. Or there's a big rock that hits the bottom of the trailer so hard, that it creates a huge dent in the bottom. What if there was someone on the side of the trailer, when he dumped the bucket, and they got hit in the head by a rock? What if there was another car on the side of the truck, which got hit from falling rocks? It's all about making the work area as safe as possible, even tho there's heavy machinery there. Health, environment, and safety. In Scandinavia it's called HMS. If I take a bucket of sand and dumps it into the bed, then the next load of rocks has a cushion to land on and then the next load, falls on top of the previous, and it's a lot better for everyone.
Boy, I know how to proper load a truck. You obviously don't either. Who said anything about drinking coffee, while driving? And what's my car, got to do with this? You cannot even write properly. No matter what the trailer is made of: Steel or aluminum, you shall handle it with care, something an amateur like you, have no idea about. Do you have a license for excavator? Oh, wait, don't answer, I know! YOU are the amateur in the machine! Right? You got pissed off because I called you out, and now you're trying to defend your self, buy picking something here, and something there, before trying to make it a truth and win the conversation. Good luck boy!
Oh man, I know these comments are from a year ago but I couldn't resist replying to say what a good laugh I got out of them. You sound like someone who just got out out of one of those "operator schools" lol Just where is this guy going to find sand to pad the bed with? Should he call out and order some? And where do you see anyone walking or driving on the offside of the truck? And in any case, this guy didn't lose so much as a pebble over the side anyway. He's got the bucket down as far as humanly possible in those beds and he lets the loads go out nice and smooth, I didn't see any of those trucks bouncing or shaking around. That's a good operator doing a damn fine job right there
Wow looks at all those rocks & dirts I would too have some in the back yard
I love the sound when the Rocks hit the back of the steel bed
Exactly
Good video ... GREAT OPERATOR! Safe, smooth and precise! Kudos!
Highly skilled operator 👍🏻👍🏻
great operator, super smooth and consistent. only thing maybe would be to have some of those trucjs come a little closer so you're not reaching so far to dump and possibly become unstable. ideally if it's possible you're supposed to have the edge of the bed of the truck line up with the end of your boom where the stick meets it at. that's just according to the excavation handbook and I think we all know that conditions aren't always in your favor in this line of work. anyway, he's doing great and just wanted to offer a little advice that might make yours or someone elses life a little easier 😎
Bellissimo escavatore volvo , ma quando proviamo i nuovi escavatori John Deere ?
great video. I really like the sound.
I love the sound they make when the Rocks hit the back of the truck I love that sound
いつも楽しく拝見しております。日本ではこの様な大型の工事を動画で見ることはあまりありません。大型機械の操作、非常に興味があり、操作の技術を楽しみにしているのですが、どうもプロには見えない様な感じで興醒めです。それでもたまには、さすがプロと思えるかたもおりますが比較的ずさんな積み込みの方が多い様に感じます。残念技術を見たい。頑張ってください。
Love it we need more like this i ish they two hours of videos like this keep it coming 😊
Saw this a few months back and it's still awesome footage, like to see blasted rock or stone being loaded and handled by the excavator, how many tons or pounds were loaded?? Keep up the good work
belle video de cette volvo ec480d j aime
Operador bom gostei do vídeo
he is doing a fine job there
Smooth operator.
cool video man
Es una buena costumbre cargar solo la pala de la excavadora, para que no rebose el cazo y caiga el material fuera del camión!!!!!
Well done, good job. Very careful, that´s good. :)
You are a professional,
Without a doubt
Good vidos👏👏👏👏👍👍👍👍
you can drive this 100% verry good
Great Video, GA
very nice
Nice close up video, liked as always.
Was the Volvo operator telling the truck driver that his tailgate had come open, at the end there?.
n
Crushed rock to be turned into gravel and road base material right?? Awesome footage
Vicat transport ??
Belle petite pelle, les matériaux vont au concassage?
Ça part en dépôt définitif, tu peux rien en faire (à part du remblai) car dès que ça prend l'eau ça se délite.
Ok, merci!
salut c est quel chantier
Aww they didn’t finish the rest of the rocks ☹️
Mano que vidio bom de mais parabéns
belle video et très belle machine ,avec la rotation des semis ca débite
shaking off the loose stuff is doing the clean up dozer driver out of a job... lol
Upside down weight balance. so that the carrier does not fall over.🙄
Thank you Gilles🌞
dyktig maskinfører
Harika
ششششششش
It’s Good Volvo svedan @komatsu &caterpillar .
4
Aan Aan
Glim
Ancdpr
Amateur operator, that doesn't know how to load a truck..
Could you be more precise ?
The operator starts emptying his bucket, almost before the truck has stopped.
He holds the bucket way too high up, before dumping it, so the material slams into the bed of the trailer.
The trailer and truck shakes from side to side because of this. You're supposed to fill the bucket with small stones, gravel and dirt first, and dump it sloowly into the bottom of the trailer and have that as a cushion for the next loads, to prevent damage on the trailers bed, kill some of the noise, and prevent extreme wear and tear on the equipment, and also to make sure that the truck driver doesn't suffer any damages, because of this. Let's say he has his coffee cup in his hands, and this amateur dumps the bucket so high that the driver spills his coffee and gets burned. Or there's a big rock that hits the bottom of the trailer so hard, that it creates a huge dent in the bottom. What if there was someone on the side of the trailer, when he dumped the bucket, and they got hit in the head by a rock?
What if there was another car on the side of the truck, which got hit from falling rocks?
It's all about making the work area as safe as possible, even tho there's heavy machinery there. Health, environment, and safety. In Scandinavia it's called HMS.
If I take a bucket of sand and dumps it into the bed, then the next load of rocks has a cushion to land on and then the next load, falls on top of the previous, and it's a lot better for everyone.
Boy, I know how to proper load a truck. You obviously don't either. Who said anything about drinking coffee, while driving? And what's my car, got to do with this? You cannot even write properly.
No matter what the trailer is made of: Steel or aluminum, you shall handle it with care, something an amateur like you, have no idea about. Do you have a license for excavator? Oh, wait, don't answer, I know! YOU are the amateur in the machine! Right? You got pissed off because I called you out, and now you're trying to defend your self, buy picking something here, and something there, before trying to make it a truth and win the conversation. Good luck boy!
Oh man, I know these comments are from a year ago but I couldn't resist replying to say what a good laugh I got out of them. You sound like someone who just got out out of one of those "operator schools" lol Just where is this guy going to find sand to pad the bed with? Should he call out and order some? And where do you see anyone walking or driving on the offside of the truck? And in any case, this guy didn't lose so much as a pebble over the side anyway. He's got the bucket down as far as humanly possible in those beds and he lets the loads go out nice and smooth, I didn't see any of those trucks bouncing or shaking around. That's a good operator doing a damn fine job right there